- Robotics - Automation - Industrial IT >
- Automation >
- I/O >
- Elma
Elma I/O
NXI-5100 series high density programmable resistance card programmable Rresistor module NXI-5100 supports LAN bus control. Its optional range of resistance is 0Ω~11.11MΩ. Resistance accuracy can be up to 0.1%. For different applications, ...
The APM series modules provides easy installation and maintenance efficiency for monitoring process signals, such as temperature, voltage and current. With the ability to connect up to 31 modules, the APM Series features both standar ...
The APM series modules provides easy installation and maintenance efficiency for monitoring process signals, such as temperature, voltage and current. With the ability to connect up to 31 modules, the APM Series features both standar ...
The APM series modules provides easy installation and maintenance efficiency for monitoring process signals, such as temperature, voltage and current. With the ability to connect up to 31 modules, the APM Series features both standar ...
SIL 3 SWITCH/PROXIMITY DETECTOR REPEATER, RELAY OUTPUT DESCRIPTION The dual channel Switch/Proximity Detector Repeater, D5030D module, is a unit suitable for applications requiring SIL 3 level (according to IEC 61508:2010 Ed. 2) in ...
GM International srl
... remote I/O system, it linked a local area network designed to connect controllers to remote I/O chassis and replacement of discrete wirings by fieldbus or industrial Ethernet communication. MIOS supports ...
... Full population of discrete cards yields 64 I/O in 2 RU (rack units); full population of analog input cards yields 32 analog inputs. See Figure 1 below for front indications and rear connections on Orion I/O. 16-point ...
The PCI-Express board with 32 digital outputs APCIe-2032 has 32 digital outputs, 24 Vand a programmable watchdog. It is especially suited for applications like signal switching, ON/OFF monitoring of motors, lights etc., als interface ...
ADDI-DATA
The Ethernet analog input system MSX-E3027 has 16 analog differential inputs, 16-bit, voltage or current inputs. The system was developed for long-term measurement in the harsh industrial environment, even under hardest conditions. It ...
ADDI-DATA
The PCI-Express 32 digital I/O board APCIe-1500 has 32 digital inputs/outputs, 24 V, 14 inputs are interruptible. The 16 digital power outputs are equipped with protection diodes and filters. The board is fully compatible ...
ADDI-DATA
The BACnet I/O modules allow digital and analogue input values to be connected using the BACnet communication protocol. MS/TP (Master/Slave Token-Passing) based on the RS485 standard is used here. This allows a total ...
The Modbus I/O modules allow digital and analogue input values to be connected using the Modbus communication protocol. MS/TP (Master/Slave Token-Passing) based on the RS485 standard is used here. This allows a total ...
The slide-in module for analogue input is designed to record voltages of -10 to +10 V and current signals of 0/4 to 20 mA. Laboratory apparatus, such as thermostats, mixers or measuring sensors, can be connected to the four potential-free ...
HiTec Zang GmbH
This slide-in module controls laboratory apparatus with analogue voltage or current inputs for control and regulation purposes. The module uses four 6-pin Tuchel sockets according to NAMUR standard for the output of analogue signals. The ...
HiTec Zang GmbH
This module enables up to 4 Pt100 temperature sensors to be connected. Due to the four-wire technology the length of the wire has no effect on the accuracy of measurement. The resolution is greater than 0.01 °C. The measurement ...
HiTec Zang GmbH
... range of input and output options including 6 digital inputs, 2 digital outputs making it suitable for a variety of remote I/O applications. Automatic Data Collection You don't need to do much to collect data. Internal ...
The module MR-SM3 is a smart meter component for building automation. Current, voltage, power and many other values can be captured by three 230 Volt current circuits. In addition, the device provides monitoring functions of for example ...
METZ CONNECT
... analog signals from the actor and sensor level directly to a control unit in building automation via Modbus RTU protocol. 29 I/Os, some of them are configurable, are available for different tasks. With strong inductive ...
METZ CONNECT
The Modbus module with 4 digital inputs and 2 relay outputs with manual control was developed for decentralized switching tasks. It is suitable for accommodating, for example, light switches and window contacts in a room, switching two ...
METZ CONNECT
ASi-3 Master/Scanner for Allen-Bradley ControlLogix, 2 ASi masters, diagnostic and configuration via RS232 diagnostic interface Technical data Fieldbus interface - ControlLogix ASi-5/ASi-3 - ASi-3 compatible Number of ASi networks, ...
Bihl+Wiedemann GmbH
Standard I/O board with digital inputs/outputs and analogue inputs/outputs 6DI,DO,2AI,1AO,+10Vr,+24V
Convertwell Oy Ab
Convertwell Oy Ab
IO board, 1 x RO (NO/NC), 1 x TI (thermistor input) Relay board with two relay outputs and one thermistor input
Convertwell Oy Ab
The scope of delivery already includes the appropriate front connector for the cabling and a base module. The module has 4 digital inputs for 230V AC.
Helmholz GmbH & Co. KG
Digital input modules for the modular fieldbus IO system TB20. The scope of delivery already includes the appropriate front connector for the cabling and a base module. The module has 4 digital inputs.
Helmholz GmbH & Co. KG
Digital input modules for the modular fieldbus IO system TB20. The scope of delivery already includes the appropriate front connector for the cabling and a base module. The module has 8 digital inputs.
Helmholz GmbH & Co. KG
VISY-Input is an input module with eight inputs, installed in a splash-proof housing IP66. It combines external alarm outputs with the highly precise tank content measurement system VISY-X. Flexible choice of installation site Low-cost ...
VISY-Output is a relay output module with eight outputs, installed in a splash-proof housing IP66. It combines the highly precise tank content measurement system VISY-X with external safety devices for alarm indicators. Flexible choice ...
The Basic 120 series offers 8 single-ended input channels per module with maximum acquisition rates ranging from 200kS/s to 3MS/s and resolutions between 16 bit and 20 bit. By using 2 modules in one carrier board it is possible to provide ...
The Fast 150 series offers differential input channels with resolutions in a range from 14 to 18 bit and maximum sampling rates starting at 1MS/s up to 100MS/s per channel. There are also switchable modules available, which for instance ...
• supply voltage 24V= • 4 outputs SPNO 230V-= max. 5A or transistor (PNP) 24V= max. 800mA or photomos max. 2A • LED indicators for inputs and outputs • 1 potentiometer supply voltage 24V= ±10% power consumption 0,5W nominal output ...
HIQUEL
The KET-DDX-410, designed for the realisation of control systems used in building automation, is an I/O module with 4 digital inputs for dry contact (max 30 Hz) and 4 digital SPDT relay outputs type NC C NO with capacity ...
... As an IIoT I/O module, ATOP’s IO5202 Series is a compact solution for connecting digital and analog devices and sensors, enabling you to monitor, acquire and process data from remote sensors and control ...
Distributed Process Intelligence type, P-NET via Light-Link, RS-485, USB Interface, Dual 100 Mbit Ethernet • Process Automation Controller • Programmable in COPP • P-NET via Light-Link, RS485 and Ethernet • Dual 100 Mbit Ethernet ...
PROCES-DATA A/S
... Energy Exchange Controller CENTRAL UNIT -Processor : STM32 32 bits/200Mhz -Operating system : Free RTOS -I/O coprocessor : FPGA Xilinx -Memories : SDRAM 8Mo, NAND, Crypto. MOUNTING AND INSTALLATION ...
LEROY AUTOMATION
The analog input module MV210-101 has 8 analog inputs which can be connected to various types of RTDs, thermocouples, position encoders, and standard signals. To communicate the input data to a controller, an Ethernet port and Modbus ...
akYtec GmbH
The digital input module MV210 has 20 or 32 digital inputs able to connect switch contacts as well as NPN or PNP transistors. To communicate the input data to a controller, an Ethernet port and Modbus TCP are at your disposal. The module ...
akYtec GmbH
The digital input module MV210 has 20 or 32 digital inputs able to connect switch contacts as well as NPN or PNP transistors. To communicate the input data to a controller, an Ethernet port and Modbus TCP are at your disposal. The module ...
akYtec GmbH
... high-performance multifunction card that provides 8-channels of independent 32-bit counters, 16 channels of isolated digital I/O, and 2 channels of isolated analog output (DAC) on a single card. The wide range of measurement ...
AMETEK VTI Instruments
The PCH Raw Data Box provides four additional raw data output channels to PCH Engineering’s top-of-the-line vibration monitor, PCH 1420. PCH Raw Data Box is a stand-alone module in PCH Engineering’s modular condition monitoring solution, ...
The PCH Input Box adds six DC process inputs and one Loop power input for external sensors to PCH Engineering’s advanced PCH 1420 vibration monitor. PCH Input Box is an optional module in PCH Engineering’s modular condition monitoring ...
The SM1 - 2 channels module of analogue inputs is destined to convert standard signals, resistance or temperature signals into numerical data accessible through the RS-485 or RS-232 port by means of the MODBUS protocol. The measurement ...
LUMEL
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining