- Machine-tools >
- Cutting Tool >
- Solid milling cutter >
- EMUGE FRANKEN
EMUGE FRANKEN solid milling cutters
Rotational speed: 500 rpm
Tools especially studied for flaring and / or deburring holes, using chamfer bits with straight shank type DIN 334 – 335 or similar. They can use bits for steel, aluminium, wood, plastic and be employed in any application. The ...
Krino S.p.A.
Diameter : 6, 8 mm
Length: 90 mm
IZAR CUTTING TOOLS S.A.L.
... advance line of Solid Carbide milling tools for Threading and Grooving Deep Parts. # Enables machining in deep holes. # Coolant through the flutes is very effective ...
Carmex Precision Tools
Universal cut geometry's designed for general purpose, providing rapid stock removal on steel, copper, cast iron and nickel alloys.
ATA Group
Diameter : 0.3 mm - 5 mm
Length: 38 mm - 64 mm
High performance slot drills with reinforced shank. Tools developed for the machining of tough materials. The patented COOL+ coolant concept allows higher productivity. The extra smooth C-TOP coating improves tool life ...
DIXI Polytool
Diameter : 0.3 mm - 5 mm
Length: 38 mm - 64 mm
End mills, reinforced shank, high performance, developed for the machining of tough materials. The patented COOL+ coolant concept allows higher productivity. The extra smooth C-TOP coating improves tool life even at high ...
DIXI Polytool
Diameter : 2 mm - 12 mm
Length: 38 mm - 70 mm
End mills developed for the machining of aluminium profiles and thin plates. DLC coating improves tool life in non-ferrous materials in case of dry machining or using emulsion.
DIXI Polytool
Diameter : 3 mm - 14 mm
Length: 39 mm - 100 mm
Micro thread milling cutters for ISO metric threads Guhring standard Coolant without type of hole both on shank DIN 6535-HA from-to M1,4 - M1,8 - M8 - M10
GÜHRING
Dry milling of Aluminum DLC (Diamond Like Carbon) is an amorphous material with high hardness and low friction rate,and has similar character of Diamond. Application for milling in Aluminum Ultra high ...
Diameter : 3 mm - 10 mm
Solid Carbide Groove Milling tools with four to six cutting edges in one tool for miniature and small bore diameter applications, producing groove widths of 0.7 - 2.0 ...
Diameter : 12 mm - 20 mm
Each kit includes a combination of three HSS countersinks designed to chamfer a wide range of holes and materials. BONUS!!!! Each kit includes a deburring Finishing Bit with a B12 blade. Ideal for both hand and power tools. These two ...
Diameter : 4.76 mm - 25.4 mm
Length: 50.8 mm - 139.7 mm
Accelerated Aluminum Machining The ALUFLASH end mill urges machinists to increase cutting speeds to the machine capacity creating limitless performance in any aluminum application. This accelerated ...
Widia Manchester
Diameter : 3 mm - 20 mm
Length: 38 mm - 104 mm
Accelerated Aluminum Machining The ALUFLASH end mill urges machinists to increase cutting speeds to the machine capacity creating limitless performance in any aluminum application. This accelerated ...
Widia Manchester
Diameter : 4 mm - 20 mm
Length: 50 mm - 115 mm
Accelerated Aluminum Machining The ALUFLASH end mill urges machinists to increase cutting speeds to the machine capacity creating limitless performance in any aluminum application. This accelerated ...
Widia Manchester
Diameter : 20.5 mm - 50 mm
... shank 19 mm (3/4") / ZSE 050 ø 40 mm / MT3 / ZSE 340 ø 50 mm / MT3 / ZSE 350 Taper and Deburring Countersink 90° Three Cutting Edges High Speed Steel Countersink For Magnetic Drilling Machine Now Available With Weldon ...
... that of standard end mills. Additional types of cutter available include ball nose cutters, T-slot cutters, Woodruff cutters, Dovetail cutters, corner ...
Dormer Pramet
Diameter : 6.3 mm - 20.5 mm
Length: 31 mm - 41 mm
Countersink-bits 90° HSS-G 90° – 3 Flutes with 1/4" Hexagon Drive
Diameter : 2 mm - 20 mm
Length: 58 mm - 105 mm
... characteristics and represents our entry level cutting tool when it comes to efficient machining. Simultaneously, it offers through HAIMER quality the best price-performance ratio possible. HAIMER MILL solid ...
HAIMER GmbH
Diameter : 3.18 mm - 10 mm
Length: 12 mm - 42 mm
Rotational speed: 18,000 rpm
... carbide coated a specialized DLC (diamond like coating) designed to out last and out perform conventional uncoated carbide cutters. The coating is designed to reduce wear and tear and dissipate heat leaving your jobs ...
Cnc3d
Diameter : 1 mm - 6 mm
Length: 4 mm - 32 mm
... carbide coated a specialized DLC (diamond like coating) designed to out last and out perform conventional uncoated carbide cutters. The coating is designed to reduce wear and tear and dissipate heat leaving your jobs ...
Cnc3d
Diameter : 3.18, 4, 6, 8 mm
Length: 22, 25, 32, 45 mm
A compression cutter starts with a 4mm up cut section then has the rest of the cutting area a downcut, they are specifically designed to leave a clean finish on both top and bottom surfaces when profile ...
Cnc3d
Diameter : 60 mm
Length: 55, 48, 36, 65 mm
DIAMOND JOINTING CUTTER D60 WITH HELICOIDAL WINGS PCD H2.5MM AXIAL 30° Diamond jointing cutter diameter 60 with helicoidal wings PCD H2.5mm axial 30°.
Microtech
Diameter : 60 mm
Length: 65, 55, 36, 48 mm
DIAMOND JOINTING CUTTER D60 WITH HELICOIDAL WINGS PCD H4.5 MM AXIAL 30° Diamond jointing cutter diameter 60 with helicoidal wings PCD H4.5 mm axial 30°. H PCD H 4,5MM CUTTING ...
Microtech
Diameter : 70 mm
Length: 45, 48, 55, 65 mm
Diamond jointing cutter diameter 70 with helicoidal wings PCD H2.5 mm axial 30°. H PCD H 2,5MM CUTTING TYPE DIA AXIAL ANGLE 30° Axial TOOL BODY TYPE STEEL FEEDING ...
Microtech
Diameter : 8 mm - 24 mm
Length: 40 mm
Tenon countersinks are used to make countersinks for cylindrical screws. Manufacturer Vischer & Bolli cutting material HSS
Vischer & Bolli AG
Diameter : 25, 16.5, 12.4 mm
Length: 65, 76, 90 mm
... straight shank HSS-Co5 design. The countersinks are chatter free and made of carbide. Manufacturer Vischer & Bolli cutting material HSS Coating No Chucking diameter [mm] 5 Shank length [mm] 42 Point angle [ 30°
Vischer & Bolli AG
Diameter : 6.3 mm - 25 mm
Length: 60 mm
The INT-Countersinks in this product series are of type 19060 and come with an angle of 60 degrees. In addition to this, the straight shank and the HSS-Co5 are other major advantages that you will surely enjoy about using this product, ...
Vischer & Bolli AG
Diameter : 1 mm - 20 mm
Length: 50 mm - 100 mm
Rotational speed: 600 rpm - 18,000 rpm
Multipurpose End Mills- 3 Flutes Steel < 48HRC MG Carbide AlTiCrN HX 1. Effectively decrease the vibrationby the designs of various helix geometry and unequal flutes. 2. Big chip breaker is designed to reach high removal rate ...
7Leaders Corp.
Diameter : 1 mm - 25 mm
Length: 50 mm - 120 mm
Rotational speed: 380 rpm - 31,800 rpm
Multipurpose End Mills- 4 Flutes Steel < 48HRC MG Carbide AlTiCrN HX 1.Effectively decrease the vibrationby various helix geometry andunequal flutes designs. 2.Big chip breaker is designed to reach high removal rate for various ...
7Leaders Corp.
Diameter : 1 mm - 20 mm
Length: 50 mm - 150 mm
Rotational speed: 480 rpm - 31,800 rpm
E141-1.5HX / 2.0HX / 3.0HX Multipurpose End Mills- 4 Flutes with various short and long length types Steel < 48HRC MG Carbide AlTiCrN HX 1. Effectively decrease the vibration by various helix geometry and unequal flutes designs. 2. ...
7Leaders Corp.
Diameter : 12 mm - 40 mm
Length: 130 mm - 350 mm
TRS INDEXABLE END MILL Recommended insert: HITACHI INSERTS RDMT08,RDMT10,RDMT12 Multi-function of cutting,roughing、surfacing、grooving
Ningbo Derek Tools Co., Ltd
Diameter : 25 mm - 50 mm
Length: 110 mm - 140 mm
RECOMMENDED INSERT: MITSUBISHI INSERTS CCMT06,CCMT09,CCMT12,CPMT08
Ningbo Derek Tools Co., Ltd
Diameter : 16 mm
Length: 100 mm
SB CHAMFERING CUTTER RECOMMENDED INSERT: MITSUBISHI INSERT SPMW09 With the insert angle of 45 design
Ningbo Derek Tools Co., Ltd
Item - Character Processing material - Solid wood Applicable Machine - CNC Advantage - Super long life time Cutter head material - TCT (CERAIZIT) Body Material - HSS(German HOGO ) Certificate - ...
Item - Character Product name - TCT profile cutter for door frame Processing material - Wood and others Applicable Equipment - Planer machine Advantage - Super long life time Cutter head material ...
Diameter : 0.5 mm - 20 mm
Length: 50, 75, 60, 100 mm
... high-speed pin cutting of CNC milling machines, which can increase the smoothness, reduce the wear coefficient, reduce the number of tool changes, improve the efficiency of the machine tool, and save ...
Diameter : 3 mm - 14 mm
Length: 54 mm - 92 mm
... Tool moves to initial position above centre of hole 2. Thread milling starts with cutter entry path 3. Thread milling followed by exit path 4. Return to initial position and end of ...
Sau manufactured a wide variety of milling cutters made of solid carbide. These includes keyslots, countersink and chamfer mills, 2-, 3-, and 4-cuttings and many more.
SAU TOOL S.p.A.
Sau manufactures a number of components, which includes thread cutting tools. The thread cutting tools are made of solid carbide, and have been specifically developed to be used in a ...
SAU TOOL S.p.A.
This device is designed with four cutting edges and a flat head, positioned at an angle of 90°. It is composed of a single shank, in compliance to the standards of DIN 6535 HB, and milling cutters ...
SAU TOOL S.p.A.
Diameter : 0.5 in - 1.2 in
Length: 1.5 in - 3 in
... removal. Dapra recommends using the shortest tool suitable for optimum rigidity. VAPOR™ End Mills are available in six cutting diameters for just the right tool, ranging from .5” to 1.5” and from 1 to 6 flutes. The ...
Diameter : 1 mm
Length: 19 mm
Carbide milling finisher, torpedo, shank Ø 1.6 mm Shape: - torpedo Total length: - 19 Weight [kg]: - 0.001 kg Head dimension Length: - 6 mm Head dimension Ø: - 1 mm Head dimensions: - Ø 1.0 ...
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining