Essentra Components non-threaded caps

Self-tapping Chinese metric 10 and manufactured in white PVC, designed to embellish the aesthetics of the panel when using braces to prevent the roof from bending, thus covering the rod that passes through the panel. Designed for: – ...

Quick installation VALDINOX offers a wide range of universal fixings and accessories, 100% compatible. Our quick installation accessories save time and costs by reducing fixing elements required and thus minimizing the risk of execution ...

Diameter: 12.7, 22.2, 28.6 mm

With Integral Sealing Flange/Washer and Liquid Tight Filter Mounting Hole Diameter Range: .500˝ (12,7 mm) to 1.125˝ (28,6 mm)

Rubber Fit Vent FIT IN Vent Type suitable for not enough space for assembly a vent. Easy Assembly High Airflow Keep pressure balance. IP68 >100cc/min@70kpa Check with us for the datasheet.

Diameter: 2 mm

snap in vent with gasket fit for 2.0mm metal sheet housing IP68,IP69K Typical Airflow:1800cc/min@kpa

Diameter: 40 mm

NBM dexterous airbag module is SRT launch of a new type of flexible end executor, products the use of special soft anti-slip friction silicone material, has a wider range of airbag inflation, the advantages of good flexibility, low cost, ...

Cover cap for die cast angle 27x27x28 Material: PA Color: black Packaging Unit: 10 pcs. Extras: Perfect fit with corner angle 4010 A 2727 EL 03

Cover caps for die cast angle Material: PA Color: black Packaging Unit: 10 pcs.

Optical upgrading of the profiles and protection from dirt. Material: PA Packaging Unit: 100 pieces

Pipe caps made of LDPE and PE LDPE and PE (polyethylene) are characterised by their resistance to most chemicals. They are flexible and practically unbreakable, which makes them optimal materials for caps. ...

Diameter: 3.5 mm - 10 mm

"For protection against damage, dirt, moisture and corrosion. Particularly suitable as a protective element for threads, axles, etc. - Convenient and easy to fit by hand."

Diameter: 1.5 mm - 248 mm

Material: PVC approx. 68° Shore A (other hardness grades and special versions on request) Colour: black ~RAL 9005 Nearly all dimensions also possible in: ~RAL 1021 rape yellow ~RAL 3000 flame red ~RAL 5017 traffic blue ~RAL 6002 ...

Diameter: 12 mm

... nominal cross section: - 35 mm² Safe our HSYS caps reduce leakage currents increase the safety of employees by protecting them from physical contacts insulate conductive connection parts Clean our HSYS caps ...

Diameter: 16 mm - 18 mm

... material: - soft flame retardant Safe our HSYS caps reduce leakage currents increase the safety of employees by protecting them from physical contacts insulate conductive connection parts Clean our HSYS caps ...

Diameter: 14 mm - 20 mm

... - black material: - soft Safe our HSYS caps reduce leakage currents increase the safety of employees by protecting them from physical contacts insulate conductive connection parts Clean our HSYS caps ...

Diameter: 12 mm - 20.5 mm

... product table below. Looking for a simple covering cap rather than a locking version? Secure Nut cap line drawing Key product features: Manufactured from a strong Polypropylene Locking covering ...

Diameter: 4 mm - 30 mm

Domed Nut & Bolt Caps All of our Plastic Nut caps & Plastic Bolt caps are made from a strong, durable LDPE and are made to fit all industry standard BSP and metric thread ...

Diameter: 0.89 mm - 9.53 mm
Operating temperature: 0 °C - 315 °C

... used over EPDM Caps for their heat resistance properties these are a cost effective masking solution. Round Silicone End caps are a versatile product that are able to stretch over a range of diameters, ...

DP01 protects the dome of the pyranometer during transport, installation and removal. Its purpose is to reduce the risk of accidental damage to the pyranometer domes. Our service records show that replacement of scratched and broken domes ...

Diameter: 10 mm - 2,000 mm
Operating temperature: 20 °C - 95 °C

... adjustable input pressure in each individual module reduces the wearing of solenoid valves, endures a long service life. 5. All metal components that come into contact with the medium are made of high-quality stainless ...

Diameter: 30 mm - 65 mm

The CAPS_TR is a polyethylene protective cap with hole, manufactured by PLASTEM. This product is generally designed for inside protection. The dimensions of this polyethylene protective cap ...

Diameter: 17 mm - 44 mm

BA BANJO UNION CAP - EXTERNAL PROTECTION Material: LDPE Colour : Yellow - Other colour on request Dimensions : mm Standard : DIN 7462 B/E Banjo Union Cap is designed to protect banjo bolt fittings ...

Diameter: 9 mm - 75 mm

OUTSIDE PROTECTION FOR CYLINDRICAL DRIVESHAFTS WITH FITTING KEY Material : PVC Colour : Yellow Dimensions : mm The outside protection ARB are intended for cylindrical driveshafts with fitting key Available in LDPE with wide flange

Provides positive stop at end of RUNWAY track. Secure each End Closer with 2pcs 30081640 M16 x 40 Bolt and Nut. • Weight 3.1kg • Hot-dip galvanised finish

Diameter: 3.17 mm - 53.34 mm

Model: - Hexagon - Material body: - Brass Connection: - Female thread

Diameter: 40 mm

Attributes for stainless steel handrails Material stainless steel (V2A) Surface

EG = EPDM, gray EB = EPDM, black CB = CR, black SB = Silicon, black General measuring tolerances (DIN ISO 3302, section 2 M2F) All Measurements in millimeters (mm)

MASKING CAPS EB = EPDM, black General measuring tolerances (DIN ISO 3302, section 2 M2F) All Measurements in millimeters (mm)

MASKING CAPS EB = EPDM, black General measuring tolerances (DIN ISO 3302, section 2 M2F) All Measurements in millimeters (mm)

Operating temperature: -45 °C - 125 °C

Type BNC is one kind of RF coaxial connector with a bayonet coupling mechanism, which has the excellent performance of quick connect/disconnect, high reliability, they are widely used in connection with RF coaxial cables in computer ...

Operating temperature: -40 °C - 85 °C

The purpose of the dust cap is to protect the connector and prevent dust from entering RF Feed diameter: 0.5mm RoHS Certificate: Compliant Frequency range - 0-18GHZ Dieletric withstanding voltage - 1000V Durability ...

Operating temperature: -45 °C - 125 °C

RF Connector TRB Dust Cap RoHS Certificate: Compliant Frequency range - 0-4GHZ Dieletric withstanding voltage - 1000V Characteristic impedance - 50Ω Insulation Resistance - ≧5000MΩ Durability (matings) - ≧500 Connector ...

Diameter: 16 mm - 89.44 mm
Operating temperature: 0 °C - 80 °C

Within the components for rollers we manufacture and market Thermoplastic caps type: KTR-00, KTR-02, KTR-30, KTR-40, KTR-42, KTR-80.44, KTR-89.44, adapter bushings … KTR-00/01 • KTR-00/01, assembly for PVC and metallic ...

Diameter: 30 mm - 108 mm

Within the components for rollers we manufacture embedded metal caps of the type: MTR-16, MTR-20, MTR-30, MTR-30-2, MTR-40, MTR-45-17, MTS-44. MTR-16 • MTR-16 indicated in light rollers for gravity ...

Diameter: 80 mm - 108 mm

... Mounting possibilities exclusively for metal pipes in the entire series. Diameters from 80 to 108mm. and 20 and 25mm shafts. Metal heads of type MTR.44 provided with precision bearings with chrome-nickel or stainless ...

For use in the propeller shafts of ships’ drive units. To protect and hold the internal ball bearings of the universal joint and fasten the shock absorber of the propeller shaft. Highly ductile punched part made of sheet steel

For use in automobile propeller shafts. To protect and hold the internal ball bearings of the universal joint and cover the propeller shaft. Highly ductile punched part made of sheet steel

Diameter: 12 mm

The security cap is manufactured by APEM, and is utilized to avoid any inadvertent operation,and when the cap is raised the lever can be controlled freely. The lever is reset/locked in a stable position ...

Diameter: 16 mm
Operating temperature: -30 °C - 160 °C

... laser etched legends. The cap can also be used without the 10DWY sealing in combination with the non-sealed Controlmec™ or as a stand-alone product. The 10D cap is mounted on Multimec™ ...