EXAIR air coolers
Power: 2.6 kW - 4.7 kW
Maximum temperature: 3 °C - 5 °C
Cooler generally works with cyclone and air fan, air lock. which is used to absorb cold air and clean dust, also it can install a screener at the cooler ...
Power: 37 kW
Maximum temperature: 30 °C
Flow rate: 13 m³/s
... and automatic system Components of the evaporator: round or oval housing from 8 mm strong steel sheet with an exhaust and air tube connection, drain for condensation- and sprinkling water (2” sleeve socket), eight ...
Flow rate: 10 l/min - 300 l/min
Air /oil coolers with blower or suction vent; air flow from 140 to 6,000 cm/H; oil flow 10-300 l/min; heat dissipable power from 1,000 to 30,000 Kcal/H; electric supply 12-24 VDC or 230-400 ...
FLUIDEA
Power: 230 W
Flow rate: 6,800 m³/h
Air volume: 6800 m³/hour Air out size: 605 x 635 Water consumption: 6 – 11,5 l./H. Tension: 230 V. / 50 Hz. Consumption: 0,23 Kw. 3 speeds Water capacity: 120 l. Dimensions: 890 x 500 x 1380 mm. Noise: ...
Maximum temperature: 30 °C - 32 °C
... all-year-round the use of a Chiller, saving up to 90% cost when compared with consumption of the chillers. The system consists mainly of air / water exchangers that have the characteristic of being built in two overlapping ...
Dega S.p.A.
Power: 26.7 kW - 104.7 kW
Flow rate: 7,500 m³/h - 26,000 m³/h
The MatrixAir™ precision cooling system has been developed to meet the increasing demand for ultra-efficient and large capacity. It is a room-based cooling system that can deliver efficient, precise, ...
Shenzhen KSTAR Science and Technology Development Co. Ltd
Power: 145 BTU/h
Flow rate: 57 l/min
™ Cabinet Cooler system for electronic control panels provide a low cost method of both purging and cooling electrical and electronic control panels by using a stainless steel vortex tube to create cold air ...
AirMasters
... forced cooling, possible to reduce the length of the conveyor, can be achieved, whether not in air conditioned room, either by hoods with centrifugal fan blowed air ducts or by fans fitted in the final ...
Power: 100, 200, 400, 900 W
Maximum temperature: -40 °C - 70 °C
Thermoelectric Coolers or Thermoelectric Assemblies are designed to remove heat around critical components within an electrical enclosure with IP66 / NEMA4 protection category. These is a thermoelectric module (thermoelectric ...
Pressure: 70 psi - 115 psi
... tool-work interface. Expanded compressed air cools tooling and helps remove chips from the cutting interface. The mist coolant lubricates flutes, holes and chips to improve hole quality. The system ...
... products and meal. The air flows in the opposite direction to the product which means that the product is gradually cooled on its way from pellet-mill to discharge hopper. The air is gradually warmed ...
Delphi charge air coolers are specifically designed to keep a car's powertrain running at optimal temperatures. And that means satisfied customers who are sure to keep their cool. - Product portfolio ...
Comet Fans designs and manufactures complete ventilation and cooling systems for any type of rolling stock. Specific fan units from our production range are integrated with structural parts using the ...
Power: 30, 60 kW
Maximum temperature: 38 °C
Flow rate: 9,600, 3,800 m³/h
... temperature • Increased free cooling capacity enabled by high inlet water temperature 14°C • Remotely control and monitor coolers with optional SNMP card.
Alto Parana s.a.
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining