FACOM pliers
Opening: 0 mm - 20 mm
- Spring-loaded automatic opening - Secure push button closure - Ø maxi 20 mm - Attached by a chain - Size : 0.5 kg Code E3400006
Opening: 3 mm - 20 mm
Water Pump Plier Nickel Chrome Plating Plastisol grip
1000V Universal insulating pliers Standards EN 60900 / IEC 60900 / FT BT 402 Use These pliers are particularly suitable for low voltage live working in confined spaces where the risk of a short-circuit ...
PENTA
1000V Fully insulated universal pliers Standards EN 60900 / IEC 60900 / ISO 5743 / ISO 5744 / ISO 5746 Use Multipurpose pliers (tightening, bending, cutting). Complete insulation of the working head ...
PENTA
EN 60900 / IEC 60900 / FT BT 402 Use These pliers are particularly suitable for low voltage live working in confined spaces where the risk of a short-circuit can have serious consequences for people and installations. Technical ...
PENTA
Opening: 55 mm
Force: 300 daN - 600 daN
Rackwith 4 setting positions for clamping any shape (6 setting positions for BXL276 grip). A wide opening. A clamping with jaws always parallel. Width of the jaws : 16 mm. Forged steel jaws, striated and case-hardened with teeth ...
DOLEX SER
Opening: 80 mm
Force: 300 daN - 600 daN
Rackwith 4 setting positions for clamping any shape (6 setting positions for BXL276 grip). A wide opening. A clamping with jaws always parallel. Width of the jaws : 16 mm. Forged steel jaws, striated and case-hardened with teeth ...
DOLEX SER
Opening: 80 mm
Force: 300 daN - 600 daN
Rackwith 4 setting positions for clamping any shape (6 setting positions for BXL276 grip). A wide opening. A clamping with jaws always parallel. Width of the jaws : 16 mm. Forged steel jaws, striated and case-hardened with teeth ...
DOLEX SER
Beltwelder pliers in plastic material, to bring the thermowelding belt edges close to eachother in order to allow their junction. Available in both inclined or straight version.
SES sleeve expanders hand and bench mounted • SES-KN and SES-KNS sleeve expander in Polyamide for sleeves A0 - A1 - A1bis - A1K - A2
• cable end-sleeves without insulation (TA) • cable end-sleeves with insulation (TE, TV) Wire cross section of 0,5 ÷ 6 mm2. • single-component PCV insulation on grips • drop forged Length: 180 mm; Weight: 235 g
Erko
• cable end-sleeves without insulation (TA) • cable end-sleeves with insulation (TE, TV) Wire cross section of 0,25 ÷ 16 mm2. • single-component PCV insulation on grips • drop forged Length: 180 mm; Weight: 250 g
Erko
Opening: 2.5, 1.8, 10 mm
Pliers for fitting works and cutting hard and very hard wire: • Al and Cu cable cross section – 16,0 mm2 Special features: • blade hardness ca. 60 HRc • material: chromium-vanadium steel • long term use even for ...
Erko
・Owing to the efficient mechanism, this tool ensures smooth operation and high durability. ・For piping work ・For plumbing (tap water faucet, etc.) ・For Tightening and removing nuts and bolts ・For twisting, bending and tensioning wires
Lobtex Co., Ltd.
Opening: 19 mm
MADE WITH SPECIAL TOOL STEEL, DROP FORGED, ENTIRELY HARDENED AND TEMPERED, INDUCTION HARDENED CUTTING EDGES, POLISHED HEAD AND HEAVY DUTY DOUBLE COMPONENT HANDLE
BENT NOSE PLIERS Blister Chromed Steel Length 125 mm Gross weight 0,09 kg
Single Crimper – Gutter Downspout Light duty tool without grips. Makes a single crimp for downsizing aluminum downspouts. FEATURES Light duty option for crimping downspouts. Compact and fits easily in a tool bag.
Malco Products, Inc.
Opening: 260, 310 mm
Our stainless steel tongs are ideal for picking up beakers, bottles etc… As standard they are made from 304 stainless steel and have the option of a rubber grip. Can be used to pick up hot or cold items. Ideal for production and laboratory ...
Self-locking scissor plier for electronics In stainless steel Mirror polished version - With straight, knurled jaws Especially useful for holding wires during welding operations Overall length 160 mm
ABC TOOLS SPA
Crimping pliers for non-insulated open terminals Jaws in microcast steel Body in pressed sheet steel
USAG
Good lever action for easy cutting Induction-hardened precision cutting edges, hardness 62 - 64 HRC For flat and round material To cut all wire types including piano wire, 1.6 mm GEDORE special hardened and tempered ...
GEDORE Tool Center KG
The Druseidt Cutting pliers were designed for cutting cables made out of aluminum or copper. They are available in sizes capable of handling cables from 20 to 50 mm in diameter. They cannot be used for cutting steel wires, ...
... force required for the closure is rather high and is therefore suitable for sampling and limited productions. MODEL Manual plier Total length mm. 220 Weight gr. 430 Usable eyelets eyelets diameter mm. 7 and 9
The manual clamp eyeleting machine GIGA in stainless steel, allows the application with minimal effort all the eyelets used for packaging (7-9-051, etc.), it is also possible to apply the large eyelets for towels and banners from 31 VL ...
Pliers for drums cutting built to CE standards. Allows clean cuts without snagging. The adjustment wheel, that comes with the clamp, allows you to adapt the clamp to any thickness of the edge of the drums Management ...
PEC PILE EXTRACTION CLAMP Finish the extraction of steel piles safely and productively. Once extracted the piles can be laid down precisely where required, avoiding the pitfalls of releasing from the jaws of a vibrator.
All pliers are designed and Made in Germany. Fulfilling the strictest quality requirements. Gripping & cutting: tough work is the ultimate test for perfect tools. Electrician's pliers with multi-functional ...
FELO
The DRP-XX circular ring pliers are specifically designed to grip circular connector and backshell components which would be deformed by other gripping methods. The non-marring rubber jaw lining material is available ...
Side cutter - oval head, Miniature cutter This is the most widely used head shape. Fits for all cutting applications where easy access is given It is robust and size for size offers the highest cutting capacity.
Weller
The pneumatic pliers type PZ have been studied to provide a quick and safe blocking of parts with a round, hexagonal or square section.
For conical ground joints, material: stainless steel, Set screw must be ordered separately
Insulated half-round straight long nose pliers. Color : Orange. Standard length : Detail : Insulated half-round straight long nose pliers. Cutting capacity half-hard steel wire 160 kg/mm² : Ø 1,6 ...
ELECTRO PJP
Due to their high clamping force, the cutters and pincers make it possible to cut chips and to clean tools in complete safety. They are available with a square-shaped aluminium protection plate or with a polyethylene protecting hilt, ...
Opening: 40 mm
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining