GAMM caps
Self-tapping Chinese metric 10 and manufactured in white PVC, designed to embellish the aesthetics of the panel when using braces to prevent the roof from bending, thus covering the rod that passes through the panel. Designed for: – ...
Diameter: 10 mm - 14 mm
Stainless Steel Dome caps are used in conjunction with weld pins, insulation anchors and lacing anchors to cover the sharp pin ends and hold in place. Finish will often match the insulation material that is being used. Product Part ...
Diameter: 0.188 in - 0.5 in
The flanged receptacles provide a permanent and proper mating hole for quick release ball lock pins. They are designed for use on materials and in applications where the pin does not have anything to lock against. Because the pin does ...
Fairlane Products
Diameter: 5 mm - 12 mm
The flanged receptacles provide a permanent and proper mating hole for quick release ball lock pins. They are designed for use on materials and in applications where the pin does not have anything to lock against. Because the pin does ...
Fairlane Products
Diameter: 0.188 in - 0.5 in
The flanged receptacles provide a permanent and proper mating hole for quick release ball lock pins. They are designed for use on materials and in applications where the pin does not have anything to lock against. Because the pin does ...
Fairlane Products
Diameter: 8 mm - 22 mm
... protectors, ribbed inserts for round-square-rectangular and oval tubes, high temperature caps and plugs, scaffold protections, plastic covers, plastic closure caps and many others.
PANOZZO Srl
Diameter: 8 mm - 25 mm
... protectors, ribbed inserts for round-square-rectangular and oval tubes, high temperature caps and plugs, scaffold protections, plastic covers, plastic closure caps and many others.
PANOZZO Srl
Diameter: 9.8 mm - 41.5 mm
PANOZZO Srl
Alutec Group srl
Diameter: 28 mm
Alutec Group srl
Alutec Group srl
Diameter: 9 mm - 20 mm
Combine SCAP-PT Cover Caps and SNCPS Socket Head Cap Screws for Cover Caps. The PTFE (Teflon) cover protects the screw head from corrosion caused by chemicals. PTFE is a plastic with ...
Diameter: 11.4, 11.3 mm
The bayonet lock coupling nut, manufactured by Temperature Technology LTD., is a coupling nut equipped with a nickel plated brass structure. The bayonet lock coupling nut is available with 1 and 2 slot designs suitable for applications ...
Temperature Technology Ltd
Diameter: 11.3 mm
The adjustable bayonet caps are manufactured by Temperature Technology Ltd. This series of adjustable bayonet caps are mounted on a spring. This method allows the bayonet cap to be readjusted. ...
Temperature Technology Ltd
Diameter: 0.75 mm - 7 mm
Temperature Technology Ltd. produces a wide range of end caps. These weld caps are offered in varying grades of high grade stainless steel such as SS304, SS321, SS316 and SS310, and in Inconel 600. They ...
Temperature Technology Ltd
Quick installation VALDINOX offers a wide range of universal fixings and accessories, 100% compatible. Our quick installation accessories save time and costs by reducing fixing elements required and thus minimizing the risk of execution ...
Diameter: 12.7, 22.2, 28.6 mm
With Integral Sealing Flange/Washer and Liquid Tight Filter Mounting Hole Diameter Range: .500˝ (12,7 mm) to 1.125˝ (28,6 mm)
Shenzhen Milvent Technology Co.,Ltd
Rubber Fit Vent FIT IN Vent Type suitable for not enough space for assembly a vent. Easy Assembly High Airflow Keep pressure balance. IP68 >100cc/min@70kpa Check with us for the datasheet.
Shenzhen Milvent Technology Co.,Ltd
Diameter: 2 mm
snap in vent with gasket fit for 2.0mm metal sheet housing IP68,IP69K Typical Airflow:1800cc/min@kpa
Shenzhen Milvent Technology Co.,Ltd
Operating temperature: -30 °C - 200 °C
Reliable Sealing of Openings for Shaft or Axle Apertures End caps reliably seal mounting bores in housings statically using axial press-fit installation. These are available in three versions: The VER01 has a smooth ...
Diameter: 40 mm
NBM dexterous airbag module is SRT launch of a new type of flexible end executor, products the use of special soft anti-slip friction silicone material, has a wider range of airbag inflation, the advantages of good flexibility, low cost, ...
Cover cap for die cast angle 27x27x28 Material: PA Color: black Packaging Unit: 10 pcs. Extras: Perfect fit with corner angle 4010 A 2727 EL 03
TecEnMa GmbH
Cover caps for die cast angle Material: PA Color: black Packaging Unit: 10 pcs.
TecEnMa GmbH
Optical upgrading of the profiles and protection from dirt. Material: PA Packaging Unit: 100 pieces
TecEnMa GmbH
Pipe caps made of LDPE and PE LDPE and PE (polyethylene) are characterised by their resistance to most chemicals. They are flexible and practically unbreakable, which makes them optimal materials for caps. ...
emico
Diameter: 5.7 mm - 168.5 mm
Operating temperature: min 70.0 °C
When selecting the caps, please note that the inside diameter must be 0.2 to 0.8 mm (depending on the nominal dimension) smaller than the outside diameter to be protected.
emico
Diameter: 5 mm - 110 mm
Ideal for the protection of exposed bolts and threads. When choosing the caps please note that the inner diameter should be 0.2 - 0.8 mm smaller than the outer diameter you want to protect.
emico
Operating temperature: -25 °C - 85 °C
A variety of protective caps are available for increased protection.
Diameter: 19, 22, 26, 32 mm
Operating temperature: 0 °C - 120 °C
Materials: (1) Aluminium cap (alloy 6060). (4) Neodynium magnet (NdFeB N35SH), heat resistant to 120 °C. (2) "MAGNETIC" word pad printed on top, heat resistant to 120 °C. (3) NBR rubber seal. Surface: Turned. Colour: Natural. SPECIAL ...
Diameter: 12 mm - 20.5 mm
... product table below. Looking for a simple covering cap rather than a locking version? Secure Nut cap line drawing Key product features: Manufactured from a strong Polypropylene Locking covering ...
Vital Parts ltd
Diameter: 4 mm - 30 mm
Domed Nut & Bolt Caps All of our Plastic Nut caps & Plastic Bolt caps are made from a strong, durable LDPE and are made to fit all industry standard BSP and metric thread sizes. Nut ...
Vital Parts ltd
Diameter: 0.89 mm - 9.53 mm
Operating temperature: 0 °C - 315 °C
... used over EPDM Caps for their heat resistance properties these are a cost effective masking solution. Round Silicone End caps are a versatile product that are able to stretch over a range of diameters, ...
Vital Parts ltd
DP01 protects the dome of the pyranometer during transport, installation and removal. Its purpose is to reduce the risk of accidental damage to the pyranometer domes. Our service records show that replacement of scratched and broken domes ...
Diameter: 10 mm - 2,000 mm
Operating temperature: 20 °C - 95 °C
Hydrostatic Pressure Tester Overview JJHBT is mainly used to determine the resistance of thermoplastics pipes and short-time hydraulic burst to constant internal water pressure at constant temperature. It is applicable to thermoplastic ...
Diameter: 30 mm - 65 mm
The CAPS_TR is a polyethylene protective cap with hole, manufactured by PLASTEM. This product is generally designed for inside protection. The dimensions of this polyethylene protective cap ...
PLASTEM
Diameter: 9.2 mm - 63.3 mm
EXTERNAL THREAD AND SMOOTH OPENING PROTECTION WITH PULL-OFF EAR Material: LDPE Colour : Yellow - Natural - Blue Dimensions : mm Standard : Metric (DIN13), Gas/BSP (DIN259), UNF/JIC(B1.1) Ref. AR with pull-off ear are intended for ...
PLASTEM
Diameter: 10.7 mm - 25.4 mm
... request Dimensions : mm Standard : Metric (DIN13), Gas/BSP (DIN259), UNF/JIC (B1.1) Ref. CAPU_C is a flanged protection caps for outside cover. Quick fitting and removal Easily pushed onto usual threads
PLASTEM
Diameter: 0.125 in - 3 in
Material-Code: investment casting 1.4408, 1.4571 - 7 turned sf-standard
Provides positive stop at end of RUNWAY track. Secure each End Closer with 2pcs 30081640 M16 x 40 Bolt and Nut. • Weight 3.1kg • Hot-dip galvanised finish
WERIT offers a wide range of screws and nuts. This means that customers receive special products for various uses that are ideal assistants for the various scenarios that they are used. Whether you are looking for Phillips-head screws, ...
Our company is glad to offer you Twist-Off caps used for production of drinks of different kinds, mustard, horseradish, sauces, different creams, mayonnaise, barbecue sauces, ketchup, fruit and vegetables, preserves, ...
The spindle top cover with blue sealing These accessories are the optimal choice for equipment that must comply with strict hygiene requirements. The seal blocks out water and bacteria and also prevents a non-hygienic metal-to-metal ...
... - black material: - soft Safe our HSYS caps reduce leakage currents increase the safety of employees by protecting them from physical contacts insulate conductive connection parts Clean our HSYS caps ...
Hagemann Systems GmbH
Diameter: 12 mm
... nominal cross section: - 35 mm² Safe our HSYS caps reduce leakage currents increase the safety of employees by protecting them from physical contacts insulate conductive connection parts Clean our HSYS caps ...
Hagemann Systems GmbH
Diameter: 34 mm - 35 mm
... material: - soft flame retardant Safe our HSYS caps reduce leakage currents increase the safety of employees by protecting them from physical contacts insulate conductive connection parts Clean our HSYS caps ...
Hagemann Systems GmbH
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining