GKS steel jacks
Lifting height: 300 mm
Cable jacks are used to lift, support and distribute low and high voltage cable drums to enable efficient cable laying and pulling for low and high voltage cables Features Inspected and certified Designed ...
Cable Drum jacks
Lifting height: 310 mm
Cable jacks are used to lift, support and distribute low and high voltage cable drums to enable efficient cable laying and pulling for low and high voltage cables Features Inspected and certified Designed ...
Cable Drum jacks
Lifting height: 310 mm
Cable jacks are used to lift, support and distribute low and high voltage cable drums to enable efficient cable laying and pulling for low and high voltage cables Features Inspected and certified Designed for ...
Cable Drum jacks
Compact and lightweight jacks for easy transportation. Load can be lifted with either toe or main plunger. Fitted with relief valve to prevent overloading. Excellent for lifting load in reduced access situations. ...
Larzep
Lifting height: 17 mm - 55.1 mm
All purpose self contained jacks that are ideal for use in general industrial applications. Used extensively in maintenance, construction and material handling applications.
SIMPLEX
Lifting height: 14 in
Double-lever sockets for jacking in close quarters. Drop-forged, aloy steel, heat treated components. Plated springs to resist corrosion. Large base insures a firm foundation. Supports full rated ...
SIMPLEX
Lifting height: 6.6 in
Thick base material with large area for increased strength and stability during lifting. High strength beam and pump linkage for long life. Safety relief valve to prevent overload. All models include over-travel protection. ...
SIMPLEX
Lifting height: max 250.0 mm
The J30 from Olmec is a hydraulic jack with a 2-stage configuration. It has a carrying capacity of 10,000 kg or 20,000 kg, and an operating pressure of 10 bar (143 psi). The jack has an optional extension ...
OLMEC
Stroke: 22.3 cm
Pressure: 499 bar
Weight : 19.5 kg
Stanley’s self-contained hydraulic track jacks are proven tough with impressive power-to-weight ratios and lifting capacity. Features: Integrated pump/carry handle increases tool durability and improves ergonomics. ...
Lifting height: 200 mm
Aluminium mechanical jack, fitted with an aluminium body to reduce the weight. Special sliding pads are used instead of ball bearings. All jacks must be handled with care and are suitable for higher place ...
Holmatro Industrial equipment
- enclosed housing with fixed rack - lifting claw capable for 100% rated load - with load pressure brake - available with safety crank or with ratchet safety crank - capacity W.L.L: 1.500 -10.000 kg
Lifting height: 3.8, 3.4, 3.1 in
Height: 3, 2 in
Weight : 14, 22.22, 30.2 lb
... bottle jacks are specifically designed and fabricated to fit a range of lower clearance jobs. All the quality, features and lifting capacity of the standard jacks offering 12-ton and 20-ton model variants. ...
Lifting height: 4.8, 4.9, 5.9 in
Weight : 18.3, 53, 83.8 lb
The Power Team bottle jack-style toe jacks are loaded with many of the same features as our standard bottle jacks, but the toe-lift feature and swiveling pump handle socket make them ...
Weight : 25, 54, 68 kg
Reelstand jack, roller head, safety brake. Maximum diameter of the coil 1.120 mm, load capacity 1.500 kg Weight 25 kg /ud
Height: 652 mm - 977 mm
Stroke: 500, 600, 400 mm
Pressure: 150, 220, 100 bar
... Lifting capacity 3) Tubes features • Dimensions • Thickness • Steel type and features • Reinforcements • Anti-grip systems 4) Base • Base type • Footplate size and thickness • Steel type ...
RIMA SPA
Height: 410 mm - 1,260 mm
Stroke: 150 mm - 500 mm
Weight : 6.5 kg - 24 kg
Sidewind jacks There are infinite possibilities for customising a sidewind jack, starting from a standard model or from a new project. The standard range consists of models with one or two gear reduction ...
RIMA SPA
Height: 410 mm - 1,215 mm
Stroke: 150 mm - 500 mm
Weight : 1.8 kg - 22.8 kg
Topwind jacks Topwind jacks are often customised, starting from a standard model or a new project. The standard range consists of models with one or two gear reduction speeds, with fixed or extractable ...
RIMA SPA
Lifting height: 112 mm
Pressure: 8 bar - 10 bar
Weight : 16.5 kg
Pneumatically controlled jacks consisting of a highly resistant diaphragm and internal telescopic guide. These jacks are fitted with a limit stop device as well as a safety valve making them absolutely ...
Paoli
... strandjacks, heavy offshore platforms can be transferred from or onto barges. • DISCOVER OUR STRAND JACKS - Hydraulic jacking device using steel wire - For vertical lifting - Or ...
Lightweight 1.3 ton trolley jack Very light aluminium jack Ideal for break-down service Short 2 piece handle bar Equipped with carrying handle Fast stroke: with only 11 pump strokes up to the max. ...
RODCRAFT-KORB
Lifting height: 113, 120, 145, 140 mm
Weight : 8, 19, 38, 53 kg
Machine jacks with lifting claw are used in applications where space below the load is restricted, thus preventing the use of traditional lifting equipment. Typical applications for machine jacks are ...
Columbus McKinnon Industrial Products
ST-HBT-11 Hydraulic A-frame Lifting Trolley is small, robust and powerful. Due to its loading capacity of 3000kg, the trolley can transport A-frame weighing up to 5000kg. Safe lifting and lowering operations can be performed with this ...
Lifting height: 350, 300 mm
The Rack Jack is manufactured by Carl Stahl, and is a manual lifting in accordance to DIN and factory standard with lifting housing and fixed claw. There is a spur wheel gear constructed from high-grade tempered steel ...
Carl Stahl GmbH
Lifting height: 6.8 in - 7.1 in
The 12-30T low profile Bottle Jack is specifically designed and manufactured to provide the features,quality and same lifting capabilities as that of the standard jacks in a lower scale. These jacks ...
SPX Hydraulic Technologies
Trailer supports provide safety for uncoupled semi-trailers during loading/unloading operations.
Lifting height: 75 mm - 305 mm
... overload protection. Also included is a a release valve, which is managed by an operating lever, for lifting and bringing down of jack. Models over 15 tons are provided with an integrated carry handle.
Euro Press Pack Spa Unipersonale
Lifting height: 420 mm
Height: 260 mm
... construction, for heavy vehicles high level of stability with safety valve incl. plug-in telescopic piston rod massive steel construction slow descending with load Technical data CE Standard - Yes Gross weight ...
Lifting height: 3.2 m
... weight and 3.20 meters in diameter: all the common areas of use are covered by the range, from compact spindle lifters and jacks to the hydraulic Hydrokat®. The high quality of design and workmanship is common to all ...
Katimex® Cielker GmbH
Lifting height: 9.5 in - 18.5 in
Weight : 18 lb
Complies with ANSI/ASME B30.1 and PALD-1 Standard Heavy-duty bases are electrically welded providing a stable platform Hydraulic system is protected from damage by internal by-pass mechanism Industrial-duty construction permits use ...
WMH Tool Group
Lifting height: 80 mm - 495 mm
Weight : 31 kg
Hydraulic jacks for cars and vans. With a robust frame of high- strength steel, the Trolley Jacks guarantee precision and safety when lowering. LENGTH - 660 mm WIDTH - 410 mm
CAP srl
Lifting height: 1,150 mm
Weight : 14, 20, 28, 46 kg
Peddinghaus is one of the long-standing manufacturers of hand-operated winches. They are used everywhere something needs to be quickly lifted. The winch is easy to transport with no hydraulic hoses or electric supply and is therefore ...
Weight : 16, 20, 28, 46, 75 kg
Made of high quality steel, these rack jacks are safe to operate and durable over time. They have a high lifting speed, with a minimum crank-like force. All mechanical rack jacks are ...
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining