- Hydraulics - Pneumatics >
- Pump >
- Centrifugal pump >
- Goulds
Goulds centrifugal pumps
Flow: 30 m³/h - 2,000 m³/h
Pressure: 0.3 MPa - 2 MPa
Head: 20 m - 500 m
... fire-fighting water pump group series with high pressure are developed successfully, strictly complying with national standard-GB6245 2006 “Performance requirement and testing method of fire fighting pumps” ...
Shanghai Kaiyuan Pump Industrial Co., Ltd.
Flow: 18 m³/h - 2,000 m³/h
Pressure: 0.3 MPa - 2 MPa
Head: 20 m - 500 m
... other variables to optimize the performance of the pump. It also provides necessary information to operators, such as pump flow rate, pressure, and other relevant data. The controller can be manually ...
Shanghai Kaiyuan Pump Industrial Co., Ltd.
The working principle of a centrifugal pump is based on the conversion of electrical energy into mechanical energy, which is then used to move liquids through pipes or tubes. The pump ...
Shanghai Kaiyuan Pump Industrial Co., Ltd.
Flow: 1, 1.5 l/min
Pressure: 100 bar
... looking for a safe and professionalhigh-pressure pump sales service, MIXTRON is the right choice for you. What's the secret to our success? A unique design and top-tier components. The pump is made of ...
MIXTRON S.R.L.
Flow: 2, 2.2 l/min
Pressure: 100 bar
... looking for a safe and professionalhigh-pressure pump sales service, MIXTRON is the right choice for you. What's the secret to our success? A unique design and top-tier components. The pump is made of ...
MIXTRON S.R.L.
Flow: 4, 5 l/min
... looking for a safe and professionalhigh-pressure pump sales service, MIXTRON is the right choice for you. What's the secret to our success? A unique design and top-tier components. The pump is made of ...
MIXTRON S.R.L.
Flow: 5,000 l/h
Pressure: 2 bar - 2.5 bar
Power: 0.7 kW
... alkaline brass plating. TECHNICAL SPECIFICATIONS PUMP It is made of anticorrosive or highly protected materials to withstand acids and dangerous filtering-liquid components • Polypropylene (Moplen) pump ...
OMG sas di Gibogini Stefano e C
Flow: 25,000 l/h
Pressure: 2 bar - 2.5 bar
Power: 4 kW
... alkaline brass plating. TECHNICAL SPECIFICATIONS PUMP It is made of anticorrosive or highly protected materials to withstand acids and dangerous filtering-liquid components. • Polypropylene (Moplen) pump ...
OMG sas di Gibogini Stefano e C
Flow: 5,000 l/h
Pressure: 1.8 bar
Power: 0.7 kW
... bar): ca. 1,8-2 N.B. The filter pumps of the series CESE marked with the letter “M” are equipped with a magnetic entrainment pump, which is designed without mechanical seal. This constructional feature ...
OMG sas di Gibogini Stefano e C
Flow: 1,000 m³/h
Head: 120 m
Power: 250 kW
... plastic pumps Based on innovative strength and over 60 years of expertise in the use of thermoplastics, we have set a new milestone in the shape of a future-oriented, efficient and reliable pump system.It ...
ASV Stuebbe GmbH & Co. KG
Flow: 235 m³/h
Head: 68 m
Power: 30 kW
STÜBBE E-CLASS: entry-level model in the STÜBBE pump family horizontal, single-stage centrifugal chemical plastic pump with mechanical seal in monobloc design (not self-priming) efficient ...
ASV Stuebbe GmbH & Co. KG
Flow: 65 m³/h
Head: 90 m
Power: 7.5 kW
hermetically sealed hydraulic part reliable coupling by strong magnet systems compact design PVDF-Versions for demanding applications good availability due to modular design
ASV Stuebbe GmbH & Co. KG
Flow: 2,800 m³/h
Fluid temperature: 180 °C
... radially split pump Product Category: BETWEEN BEARINGS CUP-BB5HP encompasses heavy duty, radially split diffuser type multi-stage pumps..... The ClydeUnion Pumps CUP-BB5HP encompasses ...
CELEROS
Flow: 2,800 m³/h
Fluid temperature: 180 °C
... thermal shock. The CUP-BB5V range has been designed to produce an advanced pump with reduced whole life costs. All the pump internals can be withdrawn quickly without disturbing pump ...
CELEROS
Fluid temperature: 230 °C
... Category: BETWEEN BEARINGS CUP-BB3 pump is a heavy duty, axial split case, horizontal pump with opposing impellers..... The ClydeUnion Pumps CUP-BB3 pump is a ...
CELEROS
Flow: 12 m³/h
Power: 0.37, 0.25 kW
Weight: 8, 12 kg
The FL20C centrifugal pump is well known for its small size and high performance. Despite their small size, these pumps can provide flows up to 12 m3/h with good outcomes. ...
... consisting of Water Pumps, Thermostats, Thermostat Kits, Switches & Sensors, Coolant Flanges and Radiator Caps. In the quest to reduce engine emissions, there is a growing trend among vehicle manufacturers to use Electric ...
Flow: 110, 140, 70, 90 us gal/min
Head: 19.8, 18, 21.3, 12 m
Power: 0.75, 1.5, 0.4 kW
... electric submersible pump The GSP05 model is available in 0.5 hp (0.4 kW) and offers a flow rate of 70 US GPM (4.4 l/sec) and maximum heads to 39 ft (12 m). With a slimline top discharge design only 7.2 in (183 ...
Alcon
Flow: 32 us gal/min
Pressure: 0 psi - 52 psi
WX10 (WX10K1A, WX10K1AT ) FEATURES Lightweight general purpose pump Easy starting Honda mini 4-stroke engine 37 gal./min capacity Weighs only 13.4 lbs. Garden hose adaptor, suction hose, clamps, ...
Honda Power Equipment
Flow: 74 us gal/min
Pressure: 0 psi - 52 psi
WX15 Lightweight general purpose pump Easy starting Honda mini 4-stroke engine Weighs only 20 lbs. 72 gal./min capacity Hose clamps and strainer included
Honda Power Equipment
Flow: 164 us gal/min
Pressure: 0 psi - 45 psi
WB20 (WB20XK2A ) FEATURES General purpose, centrifugal 2" pump Easy starting Honda OHV commercial engine 152 gal./min. capacity Durable silicon carbide mechanical seal Cast iron volute and impeller
Honda Power Equipment
Flow: 0 m³/h - 1,000 m³/h
Power: 1.3 kW - 310 kW
... Excellent flow passing properties Motors with high power density Robust and reliable COMPACT CHOPPER PUMPS CUT SUMP PROBLEMS DOWN TO SIZE The Flygt F 3069 chopper pump is specifically ...
FLYGT
The hand pump is a simple and cost effective method of moving small and medium quantities of liquid from a 200 L barrel, 60 L drum or a 25 L pail (requires an adapter). The pump is ...
Pressure: 63 bar
Power: 0.18, 0.12 kW
Fluid temperature: -10 °C - 60 °C
The pump is designed for the lubrication with plastic grease or oil of machines and equipment requiring continuous lubrication in small quantities. The lubricant is fed to each receiving point via ...
Flow: 0.03, 0.06 l/min
Pressure: 200 bar
Power: 0.38 kW
... a common body with a piston-crank system, two pumping units consisting of bodies, pistons connected with sliders, a piston-crank system and check valves, overflow valve located at the pump ...
Flow: 10 m³/h - 1,400 m³/h
Weight: 142 kg - 1,956 kg
The Linatex pump, type III R, belongs to the latest generation of successful wear-resistant and corrosion resistant slurry pumps and has an improved efficiency. It has in practice proven durable Linatex ...
Flow: 2,600 m³/h
Pressure: 10, 15 MPa
Head: 300 m
Single-stage radial impeller radially split volute, horizontal, centerline mounted. Axial suction, radial discharge, suction and discharge flange pressure rating is the same. The axial force in the pump ...
SOURCE Pumps & SYSTEMS Co., Ltd.
Flow: 1,000 m³/h
Pressure: 5 MPa
Fluid temperature: 30 °C - 230 °C
... single suction radial impeller, radially split volute. Axial suction, axial discharge, the center of suction and discharge ports are located on the same horizontal line, vertical installation, small footprint, ...
SOURCE Pumps & SYSTEMS Co., Ltd.
Flow: 2,000 m³/h
Pressure: 2.5 MPa
Head: 160 m
Single-stage radial impeller, horizontal, radially split volute, foot mounted. Axial suction, radial discharge, suction and discharge flange pressure rating is the same. Dimensions and performance meet ...
SOURCE Pumps & SYSTEMS Co., Ltd.
Flow: 0 m³/h - 1,850 m³/h
Head: 0 m - 120 m
... operating in optimal condition. The pump utilizes a flexible coupling, which allows the internal pump component to be removed without dismantling of the motor from the pump or the pump ...
Flow: 50 l/min
Pressure: 360 mbar
• Extreme compactness and solidity • High efficiency (up to class A ++) • Integrated heating element • Pressure: 360 mBar – Flow rate: 50 L / min Applications • Domestic and professional dishwashers
Flow: 93, 74 l/min
Head: 11, 26 m
Power: 640 W
... galvanic industry beside JP-280. This handy, very robust and powerful motor can be used to drive the suction tubes of drum pumps. In this combination it is suitable for many thin liquid and slightly viscous, neutral, ...
Dr. Jessberger GmbH
Flow: 20 l/min - 49 l/min
Head: 7, 9, 10, 5 m
Power: 250 W
... ventilated universal motor. The lightweight, handy and powerful device can be used as drive for the pump tubes of the laboratory and drum pumps and is useful in this combination for many thin fluid, ...
Dr. Jessberger GmbH
Flow: 18, 33, 42 l/min
Pressure: 6 bar
Head: 5, 6, 8 m
... used as drive for the laboratory and drum pump tubes and is suitable in this combination for many thin liquid, neutral and aggressive media. Flammable media are not allowed to be transferred with the laboratory pump ...
Dr. Jessberger GmbH
Power: 17.6 kW
Length: 1,130 mm
Width: 740 mm
... rate, high-quality seals and an automatic low-oil shut-off system. All of our ENDRESS motorised pumps are self-feeding suction pumps based on the centrifugal pump principle ...
Flow: max 1200.0 us gal/min
Pressure: max 8.0 bar
Head: 310'00"
QC Series Centrifugal pumps are built and designed in compliance with 3A Standards, with the following characteristics: Open Impeller Volute casing with central suction Fittings: Clamp (standard), ...
Q-Pumps
Flow: 0.5 l/min - 12 l/min
Pressure: 20 bar
Power: 1.8 kW
The m-tec speedy-MP is an easy-to-handle pump for processing soft materials or pumpable products such as structured or decorative renders with a granularity of up to 2 mm. It is mainly used to pump creative ...
M-TEC Mathis Technik
Flow: 3 l/min - 22 l/min
Pressure: 30 bar
Power: 4 kW
The m-tec P20 is a compact pump for processing soft materials or pumpable products with a granularity of up to 4 mm. The P20 is mainly used to pump basic, decorative, synthetic resin ...
M-TEC Mathis Technik
Flow: 3 l/min - 24 l/min
Pressure: 30 bar
Power: 4 kW
... m-tec m-tec pump is the perfect entry-level model for the automation and automation and 3D printing sector. Advantages Easy adaptation to different materials due to infinitely variable power control Problem-free ...
M-TEC Mathis Technik
Flow: 66 l/min
Pressure: 1.5 bar - 2.8 bar
Head: 34, 45, 53 m
Self-priming centrifugal multi-stage pump For pumping rainwater out of storage tanks Rubber feet to suppress pump vibration and noises Integrated stainless-steel dirt trap Suction ...
Flow: 0 us gal/min - 178,000 us gal/min
Head: 0'00" ft - 152'00"
Axial Mixed Flow Pumps Vertical, wet pit design pump for Circulating Water Service (including condenser). Specifically designed for the nuclear industry, it features a number of hydraulic designs, and ...
Hayward Tyler®
Flow: 0 us gal/min - 3,000 us gal/min
Head: 0'00" ft - 500'00"
... injection pumps Decay heat pumps (low pressure injection) Reactor spray pumps Class 2 pumps for any other service involving low NPSH or thermal shock applications Auxiliary ...
Hayward Tyler®
Flow: 0 us gal/min - 50,000 us gal/min
Head: 60 m - 210 m
Design Features of Hayward Tyler Vertical Turbine Pumps The VS range was designed specifically for the nuclear industry and offers three different impeller types. Each impeller type provides a different head-capacity ...
Hayward Tyler®
• Magnetic drive pump made of plastic material • Closed or open impeller pump in AISI304 or AISI316 • Connectors in PP, PVC, PVDF • Pumps with membrane in plastic material or steel
Flow: 0 m³/h - 20 m³/h
Pressure: 0 bar - 10 bar
The WANGEN MX-T serie: Suitable for aqueous to highly viscous media. Cassette design with minimal dead space Short assembly length Uniform metering with low pulsation Quick and easy to clean Benefits and Characteristics little ...
WANGEN Pumpen
Flow: 0 m³/h - 160 m³/h
Pressure: 0 bar - 16 bar
self-priming pump Type A The WANGEN progressing cavity pump Type A has swivel pushers inside the suction chamber that switch the pump from suction to pump mode. The ...
WANGEN Pumpen
Flow: 0 m³/h - 75 m³/h
Pressure: 0 bar - 16 bar
... an easy pump access. The pump drive is provided by a power take-off or a drive shaft with a feather key. A robust pump solution for agricutural enineering. Benefits and Characteristics no ...
WANGEN Pumpen
Flow: 1.66 l/s
Power: 1.1 kW
FEATURES High pressure Magnetic pumps can be used with chemically aggressive liquids Best resistance to working conditions Significant improvement in safety and durability Robust structure. Continuous efficiency Hermetic, ...
Flow: 0.53 l/s
Power: 90 W
FEATURES No lock needed No leak risk Compact and high resistant design Running for long periods without need of spare parts Easy maintenance Do not allow to run dry! APPLICATIONS Allows transfer of the majority of chemical ...
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining