- Hydraulics - Pneumatics >
- Pump >
- Chemical pump >
- GRACO
GRACO chemical pumps
Flow: 0 l/h - 700 l/h
Head: 5.4 m
Power: 115 W
The totally re-designed Sauermann Si-83 Tank Pump represents an in-class breakthrough for condensate removal technology. This revolutionary condensate removal solution has been reimagined from the inside-out to be more ...
Sauermann
Flow: 10, 12, 14 l/min
Length: 165, 192, 279 mm
Width: 160, 170, 166 mm
... selfpriming pumps, with pump body in stainless steel and PTFE – or Viton® seals, for the supply of fluids with particular chemical characteristics. It is recommended to check the compatibility ...
Flexbimec
Flow: 35 l/min
Pressure: 1 bar - 4 bar
Length: 140 mm
Pneumatic, selfpriming rotary vane pump for the transfer of petrol, with body in cast iron with anticorrosive coating and plastic rotor. Earth cable to enable an electrostatic discharge on demand. The pump ...
Flexbimec
Flow: 25 l/min
Pressure: 2 bar - 6 bar
Length: 530 mm
Pneumatic 1:1 – piston pump, suitable for the suction and the transfer of petrol. Earth cable to enable an electrostatic discharge on demand. The pump is constructed in accordance with directive ATEX 2014/34/EU.
Flexbimec
Flow: 10 l/h - 750 l/h
Pressure: 0.3 bar - 6 bar
Fluid temperature: 5 °C - 40 °C
The distinguishing feature of our proportional volumetric dosing pumps is their ability to use the driving force of water to mix and produce a solution always proportional to the volume of water supplied. This means there’s ...
MIXTRON S.R.L.
Flow: 1,500 l/h
Pressure: 6 bar
Fluid temperature: 5 °C - 40 °C
The distinguishing feature of our proportional volumetric dosing pumps is their ability to use the driving force of water to mix and produce a solution always proportional to the volume of water supplied. This means there’s ...
MIXTRON S.R.L.
Flow: 10 l/h - 2,500 l/h
Pressure: 6 bar
Fluid temperature: 5 °C - 40 °C
The distinguishing feature of our proportional volumetric dosing pumps is their ability to use the driving force of water to mix and produce a solution always proportional to the volume of water supplied. This means there’s ...
MIXTRON S.R.L.
Flow: 0 l/min - 1.5 l/min
Fluid temperature: -60 °C - 120 °C
Length: 210 mm
... tubing size based on the following chart. Support manual mode Support fully automatic cycle Semi-automatic cycle Manual start/stop Speed control Basic Parameters Current: 2A max Pump ...
Kamoer Fluid Tech (Shanghai) Co.,LTD.
Flow: 0.12 l/min - 1.52 l/min
Small volume, high flow Easy to replace the pump tube Stainless steel rotor, long life Stepper motor, precise control Suitable for viscous and non-viscous liquid transfer The wall thickness of the ...
Kamoer Fluid Tech (Shanghai) Co.,LTD.
Flow: 0.001 l/min - 0.485 l/min
Pressure: 0 bar - 2 bar
Head: 2 m
... 485ml/min.(For intermittent work only) 300RPM supports continuous working mode Easy to operate, can quickly replace the pump tube; High precision, low noise, simple structure, maintenance-free Two tube clamp ...
Kamoer Fluid Tech (Shanghai) Co.,LTD.
Flow: 0.002 l/min - 1 l/min
Power: 20 kW
Length: 190 mm
SP 311 Peristaltic Pumps Peristaltic pumps ideal for transferring gas, liquids, mixtures and emulsions in various industries. Easy to use and Reliable • Minimum maintenance (just replace the tube) • ...
Flow: 45 l/min
Pressure: 2 bar - 6 bar
Input diameter: 1.5 in
... supply / transfer with recirculation PUMP PERFORMANCE Ratio: - 8:1 b Max cycles / minute: - 60 Displacement per cycle: - 757 civil code Air consumption @ 6 bar: - 2700 Nlpm PUMP SPECIFICATIONS Lower ...
Flow: 15, 19, 10, 13 l/min
Power: 12, 8.5, 11 W
Length: 105 mm
... Type Built-in use • Air mat, air bed (continuous air exhaust) • Air bearing • For burner (air supply) • Scientific & chemical instruments (analysis and agitation)
Flow: 17, 13 l/min
Pressure: -35,000 Pa - 35,000 Pa
Power: 8, 11 W
Pressure & vacuum Type Built-in use *No power plug included because it is designed for built-in use. *Rubber-made legs are sharp-pointed. Not for self-standing installation. • Air mat, air bed (continuous air ...
Flow: 2,800 m³/h
Fluid temperature: 180 °C
... thermal shock. The CUP-BB5V range has been designed to produce an advanced pump with reduced whole life costs. All the pump internals can be withdrawn quickly without disturbing pump ...
CELEROS
Reciprocating Pumps Product Category: RECIPROCATING PUMPS Reciprocating power pumps are designed with exceptional versatility to efficiently. These units are driven via electric ...
CELEROS
Flow: 760 m³/h
... duplex (direct acting) Product Category: RECIPROCATING PUMPS Reciprocating power pumps are designed with exceptional versatility to efficiently..... The ClydeUnion Pumps direct ...
CELEROS
Flow: 0.03 l/min - 1 l/min
Pressure: 0 bar - 2.5 bar
Input diameter: 0.3 mm - 6.4 mm
LabDos® peristaltic pumps are displacement pumps on which rollers force the medium which is to be fed through a hose from the outside. The fed material thus does not come into contact with metal parts ...
KD Scientific's Infusion Syringe pumps are suitable for transporting accurate amounts of liquid for numerous syringe pump operations. These applications include the infusion of calibrant into a mass spectrometer ...
KDS
Flow: 366.5 m³/h
Pressure: 1,100 bar
Fluid temperature: -40 °C - 200 °C
... The RDP series of Reciprocating Plunger Pumps is suitable for handling most liquids for Oil & Gas, Industrial and Wastewater Treatment applications. RP's RDP pump series are a type of positive displacement ...
RUHRPUMPEN
Flow: 3,200 m³/h
Pressure: 90 bar
Head: 480 m
... overhung process pump, designed and built in accordance with the latest edition of API 610 (OH2 type), and with over 130 hydraulic combinations available. Overview Designed for all fluids and process conditions, the ...
RUHRPUMPEN
Flow: 227 m³/h
Pressure: 26 bar
Head: 128 m
The IPP is a horizontal process pump designed to dimensionally meet the ANSI / ASME B73.1-2001 standard. This versatile pump efficiently handles a wide range of corrosive and non-corrosive liquids varying ...
RUHRPUMPEN
Flow: 3.4 l/h - 660 l/h
Pressure: 124 bar
Power: 1.1, 1.5, 0.18, 0.25, 0.75 kW
... result is a pump that delivers metering precision and consistency for repeatable results and efficient chemical consumption. Reliability Nyva’s ATEX-approved design and zero-leakage profile provide ...
Flow: 11.3 l/h - 2,400 l/h
Pressure: 200, 95, 90 bar
Fluid temperature: -20 °C - 150 °C
... to the development of Nexa XP, a special version of Nexa able to cope with extreme suction conditions and a wide range of chemicals. Nexa XP complies with the most stringent requirements in terms of strength and reliability, ...
Flow: 5.5 l/h - 1,000 l/h
Pressure: 10, 40 bar
Power: 0.18, 0.25, 0.37, 0.55, 0.75 kW
... , the Radix spring-return pump series offers the ideal solution for high-precision injection and metering of chemicals in multiple industrial applications. Available in both plunger and mechanical ...
Flow: 1.5 l/h - 60 l/h
Pressure: 2 bar - 16 bar
Power: 32 W
DOSmart AC is a series of dosing pumps with a step motor and advanced control functions to automate precisely and efficiently the dosing of chemicals in liquid state. This series of pumps ...
Flow: 0.00012 l/h
Pressure: 200 mbar - 2,200 mbar
Fluid temperature: 0 °C - 60 °C
- Peristaltic pump for wall or front-panel mounting - Reliable condensate removal - Self-priming: pump creates a suction force to draw liquid upwards - With return stop - Rotational speed: 1 rpm - Material ...
Flow: 0.3 l/h
Pressure: 200 mbar - 2,200 mbar
Fluid temperature: 5 °C - 50 °C
- Explosion-proof version according to ATEX for zone 1 - Peristaltic pump for wall or front-panel mounting - Safe condensate removal - Self-priming: pump creates a suction force to draw liquid upwards - ...
Flow: 0 m³/h - 850 m³/h
Head: 0 m - 950 m
Fluid temperature: 0 °C - 180 °C
Finally, there’s a robust and reliable pumping system for virtually any high pressure application. The Lowara e-MP multistage ring section pump combines Xylem’s century of experience, knowhow and expertise ...
LOWARA
Flow: 0.018 l/min
Power: 70 W
Our peristaltic pumps are used in all fields of analytical and preparative chemistry and in production operations. In particular, they are used in instrumental analysis, biotechnology, bioanalysis, ...
Spetec GmbH
Mohno screw pump Key Features Working Principles: Mohno Pump is a container type pump with a single shaft , turning eccentrically; it is composed of a rotor and a stator. The rotor ...
HIGH VISCOSITY MATERIAL FEEDING PUMP THIN MEDIUM FEEDING PUMP SANITARY FEEDING PUMP HEAT PRESERVATION SLEEVE DESIGN WATER CLEANING MECHANICAL SEAL AVAILABLE ALMOST HAVE ...
ZHEJIANG XINGSHENG MACHINERY CO.,LTD
Flow: 30 m³/h
... CIP self-priming pump adopts acid-resisting stainless steel (AISI 316) in its valve body. This has a unique resistance to alkali and acid. The positive displacement pump has features which are superior ...
ZHEJIANG XINGSHENG MACHINERY CO.,LTD
... Enterprise introduces a rectangular inlet-outlet lobe pump which can transfer 1,000,000cps of high viscosity liquid which is designed to let the high viscosity liquid be sucked unto the lobe pump easily. ...
ZHEJIANG XINGSHENG MACHINERY CO.,LTD
Flow: 34 l/h - 336 l/h
Pressure: 238 bar
Weight: 15 kg - 38.2 kg
The Williams “W” Series Plunger Pumps offer a packed plunger design The Williams “W’ Series is a piston plunger pump with a mechanical seal. It is capable of precisely injecting chemical ...
Flow: 35 l/h
Pressure: 903 bar
The “V” Series pump is a range of compact, self-contained, pneumatic metering pumps suitable for injecting a wide variety of chemicals that range from 0.07 gph to 9 gph (0.27 lph to 34 ...
Flow: 111.66965, 2, 5 l/h
Pressure: 3,000, 2,500, 1,600 psi
Weight: 12.2, 55.1, 62.1 kg
WILROY Series Hydraulic Diaphragm Pump The WILROY metering pump is a unique blend of Williams and Milton Roy pump technology The WILROY is a pneumatic-hydraulically actuated diaphragm ...
... Self-Priming Centrifugal Pumps, 140 GPM max Pentair Hypro self-priming centrifugal pumps handle big, high-capacity spraying jobs with ease. They offer outstanding performance without the need for a flooded ...
Hypro Pressure Cleaning
This high-powered, self-priming transfer pump achieves up to 200 gpm (757 lpm) and 58 psi (4.0 bar). The series includes 1542P-55SP, 1542P-65SP, 1542P-65ESP, 9342P-HM1C-5SP, and 9342P-HM5C-5SP. Key Features Close-coupled, ...
Hypro Pressure Cleaning
... long shafts and couplers between the pump and motor. The broad, versatile line includes models with rugged housings of cast iron and stainless steel that stand up to strong chemical herbicides. Stainless ...
Hypro Pressure Cleaning
... can be carried with the pump at rest or in operation and it can be manual or automatic through automatic actuator driven by 4-20 mA; different BUS; pneumatic. Accuracy within ± 1% within 10-100% of ...
Doseuro S.r.l.
Flow: 44 l/h - 3,569 l/h
Pressure: 40 bar - 250 bar
... be carried with the pump at rest or in operation and it can be manual or automatic through automatic actuator driven by 4-20 mA; different BUS; pneumatic. Accuracy within ± 1% within 10-100% of rated ...
Doseuro S.r.l.
Flow: 44 l/h - 3,569 l/h
Pressure: 50 bar - 250 bar
Positive Return Sandwich Hydraulic Diaphragm Pump SDI Sandwich Hydraulic diaphragm dosing pumps comply with mechanical and performance API 675 standards. Furthermore they comply with ATEX standard, ...
Doseuro S.r.l.
Flow: 0 l/min - 246 l/min
Pressure: 20 bar
Head: 50 m
... Industry-Chemical process, deionized water, wastewater treatment, refrigerants and caustics O.E.M.-Washers, filters, chillers, cooling towers, scrubbers, plating equipment Agriculture-Acid fertilizers and other ...
Price Pump
Product feeling pump with pneumatic or electric functioning. The pump lets to transfer the product by the undervacuum homogenizer to the hopper of the filling machine. It can stop itself thanks to an ...
Flow: 0.02 us gal/h - 79.2 us gal/h
Pressure: 85 psi - 247 psi
Power: 62, 19, 110, 17 W
... mechanically-driven diaphragm pump to achieve a repeatability of ±1%. 70% Energy Savings Helical gears and return spring reduce power consumption by up to 70% compared to conventional mechanical diaphragm ...
Walchem
Flow: 0.3 us gal/h - 3.2 us gal/h
Pressure: 0.15 bar - 1.2 bar
Power: 15 W
... Series have both digital input and Stop/Start inputs built into the pump, enabling either proportional or On/Off control. • IP65 Equivalent Protection A robust housing protects the pump from normal ...
Walchem
Flow: 0.6 us gal/min - 6.7 us gal/min
Pressure: 150, 290, 73 psi
Fluid temperature: -10 °C - 60 °C
... the EWN-Y Pump: • The EWN-Y Series pump combined with EFS flow sensor provides accurate real-time control and display of the dosing rate. • Set point control allows the desired flow rate to ...
Walchem
Flow: 2,800 m³/h
Fluid temperature: 180 °C
... thermal shock. The CUP-BB5V range has been designed to produce an advanced pump with reduced whole life costs. All the pump internals can be withdrawn quickly without disturbing pump ...
Celeros
Flow: 15,000 m³/h
Fluid temperature: 180 °C
The ClydeUnion Pumps CUP-BB1 range are heavy duty, axially split single stage design engineered to maximize efficiency, provide high reliability, and offer the widest performance flexibility over the pumps ...
Celeros
Flow: 0 m³/h - 85 m³/h
Pressure: 0 bar - 370 bar
The ClydeUnion Pumps reciprocating power pumps are designed with exceptional versatility to efficiently meet the requirements of a wide variety of pumping applications. These units are ruggedly designed ...
Celeros
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining