- Hydraulics - Pneumatics >
- Pump >
- High-efficiency pump >
- Grundfos
Grundfos high-efficiency pumps
Flow: 500 m³/h - 25,000 m³/h
Head: 15 m - 180 m
Power: 200 kW - 12,000 kW
Horizontal single-stage pump with a double-entry wheel with the ability to be installed in a vertical position for water, aqueous solutions, produced water, thermal power stations, nuclear power stations, general industry.
Neftekamsk Machinery Plant LLC. (NKMZ)
Flow: 0 m³/h - 550 m³/h
Pressure: 10 bar - 16 bar
Head: 0 m - 105 m
... • TKF-M series pumps has designed for pumping non-abrasive and small particulars liquids. • Pump diamensions are acceptable TS EN 733 standard. • Suction and discharge flanges ...
SEMPA LTD
Flow: 20 m³/h - 500 m³/h
Pressure: 10 bar
Head: 10 m - 30 m
... of waste can be pump depending on the impeller structure. • This series can be coupled with diesel engine and high-efficiency IE2 or IE3 (Optional) class electric motor. • Thanks to back pull out design, ...
MAS - DAF
Flow: 0 m³/h - 750 m³/h
Head: 0 m - 150 m
Kirloskar CPHM pumps carry a back-pull-out design which enables removing the rotating unit of pump for inspection and repairs without disturbing the pipe connections. The complete range of CPHM water ...
Flow: 0.1 m³/h - 140 m³/h
Pressure: 6 bar - 48 bar
Power: 0 kW - 50 kW
gentle conveyance constant low-pulsation conveyance high efficiency OPERATION BATURIN Progressive Cavity Pumps is a type of positive displacement pumps that employs ...
Flow: 3 m³/h - 1,250 m³/h
Power: 0.36 kW - 107 kW
Fluid temperature: 80 °C
... sewage pump are designed according to Centrifugal Sewage Pump Standard . The pump has advanced design, compact structure, small volume and high ...
Flow: 300 m³/h
Pressure: 1 bar - 6 bar
Head: 10 m - 60 m
... pumping of highly abrasive, high density slurries with minimal maintenance requirements, the horizontal centrifugal pumps will maintain high efficiencies over the wear ...
Shijiazhuang Sunbo Pump Co., Ltd
Flow: 59 m³/h
Head: 24 m
Power: 4 kW
... diaphragm air pump. An environmentally friendly design that has none of the problems of oil vapour emissions and oil emulsification associated with other priming systems. Our ‘D Pumps’ offer high ...
Selwood
Flow: 0 us gal/min - 110 us gal/min
Head: 0'00" ft - 20'00"
Power: 0.03 ch
... condensate produced by high-efficiency combustion equipment. When not neutralized, acidic condensate has the potential to harm the environment and any plumbing it comes in contact with due to its acidic ...
Liberty Pumps
Flow: 0 m³/h - 34 m³/h
Pressure: 10 bar
Head: 6.9 m - 117 m
... you have the right pump to fit your application. ■ Compact close-coupled design, robust and corrosion resistant ■ Superior efficiency and performance ■ Flexible application base ...
Franklin Electric
Flow: 3.75 m³/h - 850 m³/h
Power: 3 kW - 1,600 kW
Fluid temperature: 120 °C
D series horizontal multistage centrifugal pump is multistage single suction sectional centrifugal pump with excellent hydraulic model, it has advantages of high-efficiency, energy-saving, ...
Flow: 55, 70 l/min
Pressure: 8 bar
Head: 0 m - 70 m
... Body Dıaphragm Pump Maximum Capacity : 55 lt/min Fluid Inlet-Outlet : 1/2'' NPT Max. Fluid Outlet Pressure : 8 Bar Housing Material : Aluminium Center Section Material : Polypropylene Diaphragm ...
Gisan Ltd.
DFEW-High Efficient single stage end suction pump(Close coupling)
Flow: 0.5 m³/h - 240 m³/h
Head: 4 m - 305 m
Power: 0.37 kW - 110 kW
... weighted .Cartridge type seal , able to move and change within minutes .High efficient,energy saving,low noise,environmental friendly,light weighted, easy to use and maintain,with compact WORKING ...
Nanfang Pump joint stock limited company
Flow: 3.7 l/min
Pressure: 4,200 bar
Power: 26 kW
E-DRIVE™ is the innovative High Efficiency (95%) ALL ELECTRIC Servo Intensifier Pump able to generate a pressure up to 4.200 Bar. The Numerical Control synchronizes the working pump ...
LPG ROTARY pump is commonly found in the LPG industry because its high pumping efficiency, long life, ease of maintenance. Its housing and rotors are constructed of ductile iron for ...
Flow: 0 us gal/min - 800 us gal/min
Pressure: 0 psi - 2,800 psi
Head: 0'00" ft - 85'00"
Open Channel Impeller Pumps combined with Close Internal Clearances to Allow for High Efficiency Clean Water Pumping with some Solids Handling capability.
Flow: 2.5 l/min - 240 l/min
Pressure: 31,500,000 Pa
Power: 1.4 kW - 109 kW
... , the oil pump has a variety of variable forms. The oil pump and oil motor are widely used in ships, aviation, mining, metallurgy, die-casting, forging, machine tools and other machines. Their characteristics ...
Wenzhou Solid Mechanical Equipment Co., Ltd.
Pressure: 400 psi
Power: 5,500 W
... LWB-150 pump is an idea pump for two dual hose LPG dispensers. Continuous duty design. Serviceability is simple and cost effective. LPG pump,lpg/cng/lng/gas pump, ...
Flow: 1,260 m³/h - 2,772 m³/h
Head: 13 m - 63 m
Power: 0 kW - 560 kW
... consists of slurry pumps. These pumps can be employed in mining, coal, metallurgical and construction material fields applications. They are well suited for handling minimized corrosive ...
Excellence Pump Industry Co.,Ltd.
Flow: 4,100 l/h
Head: 5 m
Power: 0.05 ch
HANIL Electric Co.,Ltd
Flow: 80 l/s
Head: 75 m
Power: 0.75 kW - 30 kW
... pumping; industrial/process pumping (water or glycol based) Armstrong Design Envelope Pumps with integrated controllers are OSHPD pre-approved! DescriptionPipe-mounted 2-pump unit with integrated intelligent ...
S. A. Armstrong Limited
Flow: 15 l/min - 40 l/min
Pressure: 4.5 bar - 6.5 bar
Power: 24 W - 48 W
... life, continuous operation • Low noise and low vibration Applications • Vacuum Packaging Machine • Vacuum Juice Extractor • Liposuction Slimming Machine • Tire pump • Portable ...
Shenzhen Boden Technology Development Co., Ltd
Flow: 36, 19 m³/h
Pressure: 0 bar
Head: 14, 12 m
... the environment. • The MTX Industrie pump uses a DC brushless motor for high efficiency and reliability, it is connected to a solar generator via a controller. The controller monitors ...
MTX Industrie
Flow: 10 l/min - 250 l/min
Pressure: 70 bar - 250 bar
Fluid temperature: 25 °C - 90 °C
Three-es manufactures pumping sets with various flow and pressure characteristics, plug&play and optimised for any washing system. Each pumping unit is assembled using only high ...
Three Es
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining