- Hydraulics - Pneumatics >
- Valve >
- Flap valve >
- HAM-LET
HAM-LET flap valves
VP BALL CHECK VALVE The ball shutter check valve is extremely reliable in both vertical and horizontal installations thanks to its simple design and absence of mechanical parts. Its working principle ...
DN: 20 mm
Pressure: 0 bar - 210 bar
Series VC5V06 Nominal Size Inch 3/4" mm 20 Maximum Flow gpm 26 lpm 100 Maximum Pressure psi 3050 bar 210 Mounting Flange (Poppet & Ball Type)
DN: 150, 200 mm
Pressure: 16 bar
Temperature: -60 °C - 180 °C
Features •Seat and seat seal easy replaceable •Vacuum-resistant •Vertical, inclined or horizontal installation •Suitable vapours, gases and liquids Specifications •Design - ISO/DIN •Nominal Pressure - 16 bar •Lining ...
Richter Chemie Technik
Pressure: 2, 4 bar
Temperature: -15 °C - 70 °C
Flow rate: 35 l/min
Cetop 3 (NG6) Pilot Operated Check Valve – Pilot Operated Check Valves. Designed for use in applications requiring an actuator to be locked in position, Pilot Operated Check Valves allow ...
YUKEN Europe Ltd.
DN: 0.75 in - 1 in
Vantage Valve. A new concept of foot valve, for fuel suction tubes on machinery. Specifications: Mesh filter for diesel fuel residues. Clear indications of opening and closing for higher ...
DN: 16 mm - 100 mm
Pressure: 0 bar - 1,000 bar
Flow rate: 20,000 l/min
... the VC line of high-pressure check valves are built to take on difficult operations and keep working. The line includes standard check valves, headed check valves and prefill-type check ...
DN: 40 mm - 800 mm
Temperature: 0 °C - 80 °C
BERMAD CS Ltd
Pressure: 0 psi - 3,000 psi
... trade; D08 MODULAR STACK VALVES Check, Flow Control, Cross Port Relief, Pressure Reducing/Relieving, Counterbalance Valves & Pressure Compensator Description Modular stack valves ...
DN: 110 mm - 160 mm
Pressure: 1.6 MPa
Temperature: 40 °C - 150 °C
... along the arrow direction of the valve, under the action of pressure, the rubber parts leave the surface of the valve core, and the valve opens. When the medium flows in the opposite ...
Zhejiang Gute Pneumatic Machinery Co., Ltd
DN: 0.5 in - 2 in
Pressure: 13.8 bar
... swing check valve prevents backflow by automatically closing when fluid reverses direction. The check valve features a Y-pattern design with renewable seat and disc, and solder end connections for ease ...
NIBCO
DN: 50 mm - 800 mm
Pressure: 10, 16 bar
... check valve with internal shaft and optional lever and weight. Highly cost-efficient due to high opening degree. Available with stainless-steel wire guard and limit signal for the open position as options. Its premium-quality ...
VAG-Group
DN: 2 in - 8 in
ASTM-A351-CF8M, ASTM-A351-CF8 Single door check valve, Fl-hook type, Design API-6D/ API-594, Inspection API-598/ ASME-B16.34, Suit flanged for ASME B16.5-150Lbs/ JIS B2238- 10K RF/ ISO-7005-1
BOLA-TEK Mfg.Co
DN: 50 mm - 600 mm
Temperature: 345 °C
The F607 is a check valve specifically designed for severe service in alumina and mining applications where scale and erosion are present Designed and engineered specifically for the mining and mineral proccessing industries.
Pentair Valves & Controls
DN: 6 mm
Pressure: 500 bar
Shut-off valves and spring-loaded seat valves from STAUFF: Check valves with metallic seal for tube installation with SP, NPT or UN/UNF female thread. Allow flow in only one direction. ...
Non return valves enable a flow in one direction and block il in the opposite direction. They therefore belong to the group of check valves (DIN 24300). ARGUS non return valves guarantee ...
ALFAGOMMA
DN: 16 mm - 110 mm
Pressure: 16, 10 bar
Temperature: 93 °C
Cepex designs and manufactures an extensive family of check valves that can be used for a wide range of applications. These valves provide an exact and reliable control of fluids, and have been designed ...
Cepex SER
DN: 50 mm - 150 mm
Pressure: 40 bar - 160 bar
DN 50 - 150 PN 16 - 40 Body: EN-JS1050 Coating: Epoxy For throttling and regulation in water treatment and distribution installations as well as hydroelectric power plants. Slotted bush with optimum flow behaviour for harmless energy ...
ERHARD
DN: 6 mm - 100 mm
Pressure: 40 bar
Temperature: -271 °C - 50 °C
... springless Non-Return-Valve - Both available for ambient and cryogenic media tempertures: -- ambient valve from -30° C to + 50° C (243 K to 323 K) -- cryogenic valve from ...
DN: 4, 5.5, 3.2 mm
Pressure: -0.9 bar - 10 bar
Temperature: -10 °C - 70 °C
Medium Filtered, oil-free and dried compressed air according to ISO 8573-1:2010, Class 7:2:4, instrument air, free of aggressive additives. Alternatively the pressure dew point must be at least 10°C below lowest occurring ambient temperature. Materials Body: ...
DN: 0.375 in - 1 in
DUC40 Dual Check Valve, Wye Pattern Bronze Body, Inline Testable Options; NPS, Swivel, Meter Thread Connections. 3/8" - 1"
Conbraco Industries
Pressure: 3,000 psi
PRECISION GROUND HEAT TREATED SPOOL that assures long life. FREE FLOW IN ONE DIRECTION and checked flow in the other (Not a zero leak check). BUILT IN DAMPENING CHAMBER provides smooth action when pilot pressure is applied. ...
DN: 80 mm - 300 mm
Temperature: -40 °C - 100 °C
Non-return valves Press formed, fully seam welded and complete with lipped ends, Non-return valves are suitable for balancing a pipework system Lever arm and weights adjustable Inner seal ...
DN: 100 mm
The FG Inox sight glass is constructed with the integration of 316 stainless steel materials. Its design also includes a female thread fitting. This assembly measures from DN 15 to 50, and approximates body mass from 900 to 4,000 kg. ...
FG INOX
DN: 80, 46, 60, 32 mm
Pressure: 300 bar - 3,200 bar
Flow rate: 0 l/min - 1,000 l/min
Check valves prevent a reversal of the specified direction of flow and thus a backflow of the delivery medium to be pumped. Special features: VA version, compact design. Throttle check valve for direction-dependent ...
DN: 10 mm
Pressure: 350 bar
Temperature: -25 °C - 80 °C
... equipment, without any need to install or replace components that have different flow ranges (e.g. proportional valves). To safeguard valve settings, the adjusting screw can be sealed with a tamperproof ...
BUCHER Hydraulics
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining