- Hydraulics - Pneumatics >
- Pipe, Tube and Fitting >
- T fitting >
- HAM-LET
HAM-LET T fittings
Diameter: 13.25, 16.75 mm
Operating pressure: 250, 400 bar
Sealing form 1 thread seal Connection 1 BSPT conical external threads Construction T shaped Design Screw-in fitting Construction type French series Note Hinweise ...
Diameter: 12 mm - 500 mm
Operating pressure: 16 bar
Series of fittings designed for conveying fluids under pressure with a cold chemical weld jointing system (solvent welding) using a suitable solvent cement and cleaner-primer. PVC-U MAIN PROPERTIES AND CHARACTERISTICS: - ...
FIP - Formatura Iniezione Polimeri
Diameter: 16 mm - 125 mm
Operating pressure: 16 bar
PVC-U Series of fittings designed for conveying fluids under pressure with a cold chemical weld jointing system (solvent welding) using a suitable solvent cement and cleaner-primer. PVC-C Series of fittings ...
FIP - Formatura Iniezione Polimeri
Diameter: 0.38 in - 4 in
Operating pressure: 16 bar
Series of fittings for pipes conveying fluids under pressure with threaded joints. PVC-U MAIN PROPERTIES AND CHARACTERISTICS: - Good chemical resistance: U-PVC resins guarantee excellent chemical resistance with ...
FIP - Formatura Iniezione Polimeri
Diameter: 13 mm - 76 mm
Operating pressure: 4.9 bar - 16.1 bar
... 650V Plastic). Traceability Silicone label QR Marking Special marking Assemblies 316L Stainless steel SZR crimp fittings Molded clamps Features Outer Layer VMQ Silicone, smooth and translucent. Reinforcement Polyester ...
Diameter: 6 mm - 29 mm
The VT conduit distributors are made of specially modified polyamide 6. They are used for coupling Murrplastik cable protection conduits of the same and different diameters.The distributors feature the following advantages:Easy assembly ...
Diameter: 4 mm - 16 mm
Operating pressure: 1 bar - 11 bar
... coupling even in the presence of pipes with diagonal cuts Made with virgin material Push-in fittings are so defined as they allow to connect the tube to the fitting in a “instantaneous” way without ...
Airwork Pneumatic Equipment
Diameter: 4 mm - 16 mm
Operating pressure: 1 bar - 16 bar
Push-in fittings are so defined as they allow to connect the tube to the fitting in a “instantaneous” way without using tools. The tightness of the tube takes place through an elastic clamp which holds ...
Airwork Pneumatic Equipment
Diameter: 4 mm - 15 mm
Operating pressure: 1 bar - 20 bar
Touch fittings are mainly used during “plastic” tubes assembly for pneumatic installation especially in case of vibrations or extreme climatic conditions (that involve changes on tube features by passing time). The fitting ...
Airwork Pneumatic Equipment
Diameter: 4 mm - 12 mm
Operating pressure: 0 bar - 15 bar
HC Fittings and Accessories with pneumatic functions CHARACTERISTICS Temperature -20 + 80 °C (based on the type of tube) Fluid compressed air, vacuum Max pressure15 bar Working pressure-0,99 -r 10 bar Bodytechnopolymer Fixing ...
• Quick fitting for outstanding operability and durability that provides a more compact configuration while maintaining fitting function. A lineup of smart types.
Reduce man-hours spent on flow settings! *Adjustable at every half rotation *Easy to adjust linear flow characteristics *Smallest in the industry, designed with low profile.
Manufacturing Process CNC Machining & Injection Molding Polyetheretherketone (PEEK) is a high-performance, engineering thermoplastic characterized by an unusual combination of properties. These properties range from high temperature ...
Diameter: 4 mm - 16 mm
Operating pressure: -0.1 MPa - 1 MPa
... . Various sizes of unequal union type makes it possible to handle with just one fitting, although two or more fittings are used before. It reduces the amount of fitting used and enables ...
NIHON PISCO CO., Ltd.
Diameter: 3, 10, 2, 1.8, 6 mm
Operating pressure: -0.1 MPa - 1 MPa
Mini-type fitting is 40% smaller than the standard type fitting. Even the ultra-small size, tube can be easily connected or disconnected. The elliptical, ultra-small release ring is employed. Easy ...
NIHON PISCO CO., Ltd.
Diameter: 3 mm - 6 mm
Operating pressure: -0.1 MPa - 0.5 MPa
Barb joint best suitable for space-saving piping. They are optimal for piping vacuum equipment. (Use with vacuum tube.) As for compression type, tube can be tightening by hands. Clean-room Package, best suitable for compact piping ...
NIHON PISCO CO., Ltd.
Diameter: 20 mm - 160 mm
Operating pressure: 16 bar
EQOfluids FR
Diameter: 20 mm - 63 mm
Operating pressure: 16 bar
EQOfluids FR
Diameter: 20 mm - 63 mm
Operating pressure: 70 bar
EQOfluids FR
Diameter: 4 mm - 12 mm
Operating pressure: 0 bar - 10 bar
Diameter: 4 mm - 10 mm
Operating pressure: 80 bar
Diameter: 3 mm - 14 mm
Operating pressure: 16 bar
... structure – Hexagon socket for easy assembly Operating temperature -20°C bis +70°C -20°C bis +80°C For fittings with PVC seal For fittings with NBR O-rings Vacuum max 98% Materials NBR ...
ITV
Diameter: 4 mm - 12 mm
Operating pressure: 16 bar
... structure – Hexagon socket for easy assembly Operating temperature -20°C bis +70°C -20°C bis +80°C For fittings with PVC seal For fittings with NBR O-rings Vacuum max 98% Materials NBR ...
ITV
Diameter: 4 mm - 12 mm
Operating pressure: 16 bar
... structure – Hexagon socket for easy assembly Operating temperature -20°C bis +70°C -20°C bis +80°C For fittings with PVC seal For fittings with NBR O-rings Vacuum max 98% Materials NBR ...
ITV
Diameter: 4 mm - 16 mm
Compact & Captivating Design Air tight sealing of tubes Durable & Maintenance free Pneumatic cylinders (ail types) Pneumatic control & circuit panels Ail Threaded nipples has plastic portion that is capable of rotating 360° Compatible ...
Diameter: 4 mm - 12 mm
Compact & Captivating Design Air tight sealing of tubes Durable & Maintenance free Pneumatic cylinders (ail types) Pneumatic control & circuit panels Ail Threaded nipples has plastic portion that is capable of rotating 360° Compatible ...
Diameter: 4, 6 mm
Compact & Captivating Design Air tight sealing of tubes Durable & Maintenance free Pneumatic cylinders (ail types) Pneumatic control & circuit panels Ail Threaded nipples has plastic portion that is capable of rotating 360° Compatible ...
Diameter: 15 mm
Set of brass T-fittings with female thread. The Stahlmann fitting guarantees leak-free installation of Stahlmann stainless steel corrugated pipe solutions. The product material ...
Stahlmann
Diameter: 1.6 mm - 11.5 mm
Operating pressure: 0 bar - 7,000 bar
MCS® High-Pressure fittings were conceived due to the need of offering an extremely reliable product to the high pressure industry. They are made with cold worked AISI 316L and are available in NPT versions up to 1035 ...
Diameter: 3.2 mm - 17.5 mm
Operating pressure: 0 bar - 1,400 bar
MCS® High-Pressure fittings were conceived due to the need of offering an extremely reliable product to the high pressure industry. They are made with cold worked AISI 316L and are available in NPT versions up to 1035 ...
Diameter: 3 mm - 20 mm
Operating pressure: 1,050 bar
MCS® High-Pressure fittings were conceived due to the need of offering an extremely reliable product to the high pressure industry. They are made with cold worked AISI 316L and are available in NPT versions up to 1035 ...
Diameter: 16 mm - 63 mm
90° Tee with threaded female take off DeltaPress brass press fittings
Unidelta S.p.A.
Diameter: 3 mm - 14 mm
Operating pressure: 0.5 bar - 12 bar
Series of push-in fittings with reduced dimensions and new collet and release collar. They are for connecting nylon and polyurethane tubes. Available in various configurations (studs, elbows, T, Y) and ...
Diameter: 2.5 mm - 15 mm
Operating pressure: 0.5 bar - 12 bar
Series of rapid fittings for connecting nylon and polyurethane tubes. They should be used in all those applications where a safer tube-fitting connection is required. Available in various configurations ...
Diameter: 80 mm - 400 mm
... quality assurance system in accordance with DIN EN ISO 9001. For all fittings a certificate in accordance with DIN EN 10204 must be submitted by the manufacturer. The body of the fitting including ...
Reinert-Ritz GmbH
Diameter: 63 mm - 315 mm
This special version of our pressure class-compatible tees enables a measuring device to be connected directly via an integrated pipe thread. Its compact dimensions mean the threaded connection is situated close to the pipeline. This ...
Reinert-Ritz GmbH
Diameter: 63 mm - 630 mm
... construction. Due to this compact design the space requirement is reduced and the cost minimised when compared to standard fittings. The fittings to be offered must be manufactured from material in ...
Reinert-Ritz GmbH
Diameter: 6 mm
... rigid tubes -Corrosion-resistant -High level of gas tightness -Material of sample-contacting parts: stainless steel Tube fittings out of stainless steel are indispensable and well- proven accessories in analytical technology ...
Diameter: 8 mm
... rigid tubes -Corrosion-resistant -High level of gas tightness -Material of sample-contacting parts: stainless steel Tube fittings out of stainless steel are indispensable and well- proven accessories in analytical technology ...
Diameter: 12 mm
... rigid tubes -Corrosion-resistant -High level of gas tightness -Material of sample-contacting parts: stainless steel Tube fittings out of stainless steel are indispensable and well- proven accessories in analytical technology ...
Diameter: 80 mm - 1,200 mm
Kolk flanged fittings are made of ductile iron GJS-400/500 (DIN1693 GGG-40/50). Designed acc. to EN 545, flange drilling acc. to EN 1092-2 (ISO 7005-2). Epoxy coated (Resicoat®) acc. to EN 14901 (DIN 30677-2) and GSK ...
Diameter: 0.25 in - 4 in
... Conduit Seals prevent the passage of gases, vapours or flame through the Exd conduit system, from one part of t he electrical system to another. Threads: - BSP TAPER BS 21 - NPT (ANSI B1.20.1) Materials: ...
Diameter: 3 mm - 14 mm
Operating pressure: 20 bar
The MA is our “Automatic push-in fitting” line. It enables quick connections with calibrated plastic hoses at any time, at any stage of the pneumatic circuit and by a simple hand movement. The connection and the fitting ...
C.Matic S.p.A.
Diameter: 6 mm - 18 mm
Operating pressure: 0 bar - 16 bar
The MT is the new push-in fittings line that has been developed and designed to ensure high reliability and safety in the pneumatic braking systems on commercial and industrial vehicles. The push-in fittings ...
C.Matic S.p.A.
Diameter: 0.156 in - 0.75 in
Operating pressure: 290 psi
Push in fittings for Vehicles applications complying with DOT FMVSS §571.106, SAE J2494-3 e SAE J1131 specs. 1-2 > Body and Release Ring: Brass UNI EN 12164 CW614N - UNI EN 12165 CW617N Nickel Plated 3 > Holding Ring: ...
C.Matic S.p.A.
Diameter: 40 mm - 1,600 mm
... wide range of flange fittings for almost every application includes single flange fittings F, double flange fittings FF, double flange bends FFK 11–45° and Q, flanged duckfoot bends N, ...
... sampling of the process is required it is preferable to use an access fitting with side tee. Tee fittings incorporate a ¼”, ½”, ¾”, or 1” NPT threaded outlet on the side of the fitting ...
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining