- Hydraulics - Pneumatics >
- Valve >
- Control valve >
- HAWE
HAWE control valves
DN: 8, 10 mm
Pressure: 16 bar
Temperature: 0 °C - 90 °C
... triangular key against unauthorised removal of water valve body and sampling pipe can be rotated 360° PTFE seat gasket can be attached to all Kemper valves with test/drain-port valve ...
DN: 8, 10 mm
Pressure: 16 bar
Temperature: 0 °C - 90 °C
... stainless steel sampling pipe can be disinfected by flame valve body and sampling pipe can be rotated 360° can be attached to all Kemper valves with test/drain-port valve ...
DN: 0.25 in - 2 in
Pressure: 63 bar
Temperature: -20 °C - 200 °C
AISI-316 · BSPP ISO-5211 mounting pad to mount directly actuators Characteristics •General industry application. •Blow-out proof stem design. •100% tested with air & water (Open/Close). Specifications •Ends: BSPP threaded ...
DN: 40 mm - 1,200 mm
Pressure: 40, 10, 16, 25 bar
STANDARDS OF MANUFACTURE Metal seat gate valves EN 1171 (ISO 1083) DUCTILE IRON GATE VALVES EN 1074-2 ISOLATING VALVES EN 558 (ISO 5752) FACE TO FACE EN 1092-2 (ISO 7005-2) DRILLING ...
ACMO S.p.A.
DN: 2 in - 12 in
Pressure: 150 psi
... SIZE: 2"~12" JOINT END: FLANGE (ANSI /DIN / JIS/ CNS) WORKING PRESSURE: 150PSI Key words: CPVC pneumatic butterfly valve
Xiamen Keheng Plastic Co., Ltd.
DN: 2.5 in - 12 in
Pressure: 150 psi
... SIZE: 2-1/2"~12" JOINT END: FLANGE (ANSI /DIN / JIS/ CNS) WORKING PRESSURE: 150PSI Key words: CPVC electric butterfly valve
Xiamen Keheng Plastic Co., Ltd.
DN: 2.5 in - 8 in
Pressure: 150 psi
... 2-1/2"~8" JOINT END: FLANGE (ANSI /DIN / JIS/ CNS) WORKING PRESSURE: 150PSI Key words: CPVC handle type butterfly valve
Xiamen Keheng Plastic Co., Ltd.
DN: 0.25 in - 1.25 in
Temperature: -10 °C - 100 °C
Excluded from 97/23/EC directive (article 3 § 3) -POM/PTFE ball seats; NBR other seats - Reduced bore- The shown images can differ from the actual product. Technical data & prices are subjected to be changed without prior notice.
MerxTrade BV
DN: 12 mm
Model: - Level gauge valve with handwheel Connection: - Thread BPS 1/2" Application: - Liquids (water, fuel and oil)
MerxTrade BV
DN: 6.35 mm - 12.7 mm
Pressure: 16 bar
Temperature: -10 °C - 90 °C
Model: - Straight gauge valve - Material body: - Brass CW 617 N according to EN 12165 Connection: - Thread male/female BSPP - Material stem: - Brass CW 614 N according to EN 12164 Material Handle: - Polypropylene Material ...
MerxTrade BV
DN: 40 mm - 300 mm
Pressure: 25, 16, 10 bar
Temperature: 40 °C
... operation The flow–control valve completely hydraulically ensures a pre–determined maximum flow, irrespective of any changes in the operating pressure. The nominal flow rate can be progressively ...
DN: 40 mm - 300 mm
Pressure: 25, 16, 10 bar
Temperature: 40 °C
The main valve is a hydraulically operating diaphragm valve. The work energy is the inherent medium. Most valve types operate purely hydraulically without any foreign energy. Application ...
DN: 40 mm - 300 mm
Pressure: 25, 16, 10 bar
Temperature: 40 °C
... open/close valve hydraulically opens or closes for the electric actuation via the solenoid valve fitted on the control line. The valve is shut when the power is off. ...
DN: 15 mm - 400 mm
Pressure: 16 bar - 150 bar
Temperature: -20 °C - 350 °C
Bellow Sealed Globe Valve Manufacturer: Bellow Seal Globe Valves, 1/2-16 Inch, DN15-DN400, Class 150-900 LB, PN16-PN150, API 602, DIN 3356, BS 5160, ASME B16.34. The Med Bellow Sealed valves ...
DN: 50 mm - 3,500 mm
Temperature: 0 °C - 600 °C
... Performance Wafer Butterfly Valve Fabricator: High Performance Butterfly Valves, Wafer Type, 2-140 Inch, 50-3500mm, 150-1500 LB, CS, SS, Aluminium Bronze. The Med Wafer High-Performance Butterfly Valves ...
Push-fit Hep2O includes unique features that enable quick and easy installation with a secure fitting. It is the only push-fit plumbing system with joint recognition, secure demounting and a 50 year guarantee.
DN: 25 mm - 100 mm
Pressure: 0.2 bar - 10 bar
Temperature: -10 °C - 140 °C
... extraction of the valve by means of 4 screws while the flanges welded to the installation remain fixed. Sanitary butterfly valvescan be operated automatically through an actuator (sanitary pneumatic butterfly valve, ...
INOXPA
DN: 25 mm - 100 mm
Pressure: 0.2 bar - 10 bar
Temperature: -10 °C - 140 °C
The A470 leakage butterfly valve can be used in most liquid product applications in the food-processing, pharmaceutical and chemical industries. The valve A470 offers a safe separation of products and ...
INOXPA
DN: 25 mm - 100 mm
Pressure: 6 bar - 10 bar
Temperature: -10 °C - 140 °C
... Open lantern allows visual inspection of shaft sealing. 360º adjustable body. The valve is authorized to carry 3-A symbol. Note: Consult the options of the valves authorized to carry 3-A symbol. Parts ...
INOXPA
DN: 50 mm - 1,200 mm
Kolk gate valves are made of ductile iron GJS-400/500 (DIN1693 GGG-40/50). Designed acc. to EN 1074-2 (DIN 3352-4) and EN 1171, flange drilling acc. to EN 1092-2 (ISO 7005-2). Face to face acc. to EN 558-1 (DIN 3202-1 ...
DN: 15 mm - 150 mm
Pressure: 16 bar
Temperature: 10 °C - 150 °C
Pressure reducing regulators zCON Material: Grey cast iron Working position: Vertical FEATURES · high tightness (tightness class – IV acc. to EN – 12266 – 1) · compact construction · ecologically safe · ...
DN: 15 mm - 150 mm
Pressure: 16, 25 bar
Temperature: -10 °C - 350 °C
Bellow control valve with pneumatic actuator and positioner zCON Material: Grey cast iron, nodular cast iron Working position: Vertical Features •high tightness (leakproofness class – A ...
Pressure: 6 bar - 10 bar
Temperature: 121, 135, 130, 150 °C
The valve body of the RIEGER aseptic valves is hermetically sealed from the environment, thus ensuring the perfect protection for your liquid product. The pocket-free design of the valve ...
Gebr. Rieger GmbH + Co. KG
Pressure: 6 bar - 10 bar
Temperature: 150, 130 °C
RIEGER hygienic single seat valves are used, when a maximum level of productivity, safety and quality is requested. They are found in plants of the dairy industry and the food industry. The advanced valve ...
Gebr. Rieger GmbH + Co. KG
Pressure: 6 bar - 10 bar
Temperature: 130, 150 °C
... food and dairy industry. The design of its one-piece valve body and the radial sealing of both valve seats along with the balanced valve disks enable a perfectly safe CIP/ IP cleaning, ...
Gebr. Rieger GmbH + Co. KG
... below the valve. The float mechanism may be located remotely from the main valve. See the technical data sheet on Model CF1-C1 Float Control for additional information. This is a hydraulically ...
CLA-VAL Automatic Control Valves
... and/or stuffing boxes are not allowed and there shall be no pistons operating the main valve or pilot controls. The Cla-Val Model 40-01 Rate of Flow Control Valve prevents ...
CLA-VAL Automatic Control Valves
Pressure: 285, 300 psi
Temperature: 180 °F
The Cla-Val Deluge Valve is designed for use in controlling water flow to Deluge, Pre-Action, or Foam-Water type fire protection sprinkler systems. This valve is UL Listed in “Special Systems Water ...
CLA-VAL Automatic Control Valves
DN: 0.25 in - 0.5 in
Pressure: 6, 16 bar
manometer gauge cock, light design, female thread x female thread, material: brass
DN: 8 mm - 20 mm
Pressure: 160, 100 bar
Temperature: -50 °C - 225 °C
... accessories Accessories Heating jacket Hand lever with bayonet locking Hand lever extension Block unit - padlock unit Spring close unit - automatical return lever ...
KLINGER-SCHÖNEBERG GmbH
DN: 8 mm - 20 mm
Pressure: 100, 160 bar
Temperature: -50 °C - 225 °C
... accessories Accessories Heating jacket Hand lever with bayonet locking Hand lever extension Block unit - padlock unit Spring close unit - automatical return lever ...
KLINGER-SCHÖNEBERG GmbH
DN: 15 mm - 200 mm
Pressure: 16, 40 bar
Temperature: -29 °C - 225 °C
... accessories Accessories Heating jacket Hand lever with bayonet locking Hand lever extension Block unit - padlock unit Spring close unit - automatical return lever ...
KLINGER-SCHÖNEBERG GmbH
DN: 25 mm
Pressure: 800,000 Pa
Temperature: 0 °C - 55 °C
The Adjustable Non-Return valve is an innovative solution for fluids flow adjustment (style needle-valves) with a self-cleaning mechanism and integral reliable ball-based non-return valve. Its ...
DN: 0.25 in - 8 in
Pressure: 45, 180 bar
Temperature: 140 °C
Ball valve - 1/4" - TF VABS 1/4 The TF-VABS ball valves have been exclusively designed and manufactured for refrigerating systems operating with all refrigerant fluids (except NH³).
DN: 100 mm - 300 mm
Pressure: 102 bar
Temperature: 60 °C
... HBC 975 is a safety device, also called slam-shut valve, suitable to quickly interrupt the flow of a gas when the pressure existing in the control point reaches the set calibration value. It is a valve ...
PIETRO FIORENTINI
DN: 1 in - 10 in
Pressure: 102 bar
Temperature: 60 °C
... slam-shut valve, the subséquent restoration of the normal operating condition, also cailed RESET operation , is carried out in a purely manual manner, after having verified and solved the causes that led to such tripping. SBC ...
PIETRO FIORENTINI
DN: 2 in - 24 in
CONTROL GAS VALVES Deltaflux The Deltaflux slam shut valve is an ideal solution for all fluid control applications where high differential pressure or great flow rates ...
PIETRO FIORENTINI
DN: 40 mm
Pressure: 10, 20 bar
Temperature: 50 °C
all medium contact parts made of Titanium Grade 2 | extremely corrosion-resistant, lightweight and compact | combined shut-off and pressure reducing function | manageable installation, easy-to-maintain owing to the clamp system | especially ...
DN: 40 mm - 80 mm
Pressure: 16 bar
Temperature: 130 °C
Float valves automatically control liquid levels in sealed or open (non-pressurised) tanks and vessels without requiring external energy. The float registers the liquid level and directly controls ...
DN: 6, 4, 8 mm
Pressure: 0 bar - 20 bar
Temperature: 0 °C - 140 °C
... Römer flow and stop valve program consists of throttle, shut-off and check valves. The function fittings offer fine adjustment possibilities for the precise regulation of fluid flows. Throttle valves ...
DN: 0.5 mm - 5 mm
Pressure: 8, 6 bar
Temperature: 0 °C - 80 °C
... allow the greatest possible flexibility. In the EFC-11, the motor and electronics are integrated in the metering valve housing. The control electronics allow the position of the motor to be set via ...
Low-load start-up control valves supply the boiler with the required quantity of feedwater during start-up (30–50% of the water required for full-load operation), regulated by volume, at higher pressure ...
Welland & Tuxhorn AG
Circulation control valve Tasks Circulation control valves regulate the flow rate during drum circulation on forced-flow steam generators. Versions Forged valves ...
Welland & Tuxhorn AG
Injection control valve Tasks Injection control valves are primarily flow control valves, which means they supply the required amount ...
Welland & Tuxhorn AG
DN: 10 mm
Pressure: 320 bar
Flow rate: 400 l/min
3/2-way valve cartridge for electric, direct and pilot controls applicable. Connection: DN10
DN: 3 mm
Pressure: 320 bar
Flow rate: 20 l/min
The pilot valve is suitable for applications with permanent pressure. The valve is fitted on the left and right side with a locking lever.
DN: 0.25 in - 1 in
Pressure: 413 bar
Temperature: -200 °C - 500 °C
Needle valve with conical stem/shutter for precision and stable close, for use in general applications. Ideal for flow regulation by strangulation liquid and gases systems sealing and venting . Thanks to its stability, ...
Metalurgica Zaes S.L.
DN: 0.25 in - 1 in
Pressure: 413 bar
Temperature: -200 °C - 500 °C
Needle valve with conical stem/shutter for precision and stable close, for use in general applications. Ideal for flow regulation by strangulation liquid and gases systems sealing and venting . Thanks to its stability, ...
Metalurgica Zaes S.L.
DN: 0.375, 0.25, 0.5 in
Pressure: 690 bar
Temperature: -200 °C - 500 °C
High pressure systems Needle valve with conical stem/shutter for precision and stable close, for use in general applications. Ideal for flow regulation by strangulation liquid and gases systems sealing and venting . Thanks ...
Metalurgica Zaes S.L.
DN: 1.5 in - 4 in
... Opening/closing: by 3W solenoid pilot valve •Applications : For water distribution •To remove operation of hydraulic valve by electric command Description G500-EL model valve ...
DN: 50 mm - 3,000 mm
Pressure: 10 bar - 100 bar
Pressure / flow control valves. Main features : ■ significant reduction in turbulence, vibration and noise ■ fine regulation of the entire range of flow, made possible by the customized trim ■ high ...
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining