Mass flow flow meters with LCD display

Process temperature: -20 °C - 150 °C
Process pressure: 40, 10, 16, 6 bar
Precision: 0.25, 0.5 %

... lengths. Therefore, the flowmeter provides very accurate measurements - even over a large area. With electromagnetic flowmeters from MJK, you are guaranteed stable, accurate measurements for years. ...

Process temperature: -20 °C - 60 °C
Process pressure: 2.5 bar - 600 bar
Precision: 0.3, 0.5 %

... electromagnetic flow meter Description of product details Brief introduction DN 6 to DN3000 covers a wide range of pipe size. Flow measurement range up to 1500:1. A variety of ...

Process temperature: -20 °C - 85 °C

... stability. Under the premise of ensuring quality, this product continuously simplifies the use of flow meters, and it only takes 30 seconds to easily achieve flow measurement. 2.Specifications 3. ...

Volumetric flow rate: 0 m³/h - 9,999 m³/h
Process temperature: 0 °C - 100 °C

flow rate measurement on Channels with restrinctions on weirs

Volumetric flow rate: 600 m³/h
Process temperature: -10 °C - 85 °C

Electromagnetic Flowmeter for Food and Pharmaceutical Industries Compact or remote mounting options Pipe diameters from DN10 to DN150 Measurement range from 0.1-600 m3/hr PTFE or PFA linings, 316 stainless steel, Hastelloy ...

Process temperature: -20 °C - 60 °C
Process pressure: 1.6 MPa

... including the water contain gravel and weeds. Display and Operation 58*22mm LCD Display the instantaneous flow , accumulative flow,time and ...

Process temperature: -10 °C - 60 °C
Precision: 2 %
Repeatibility: 0.2 %

E3E Clip-on Ultrasonic Thermal Energy / BTU Flow Meter is simple and convenient to install, and it adopts POE power supply and Ethernet communication to realize cloud data storage. Our E3E adopts ultrasonic ...

Volumetric flow rate: 420 m³/h - 4,500 m³/h
Process temperature: 130 °C
Process pressure: 25, 16 bar

The DP07 flowmeter work according to the paddle-bellows principle. By the flow of the liquid the paddle arm is moved in the direction of the flow against the force of a spring. This motion ...

Process temperature: -40 °C - 300 °C
Process pressure: 16 bar - 420 bar

... instant flow and total flow LCD display, distant signal transmission; 6.Measurable medium: Water, waste water, low viscosity oil, etc. Principle When the ...

Process temperature: -40 °C - 130 °C
Precision: 1 %

... transfer time ultrasonic flow meter. No matter you want to quickly verify the flow reading of another meter or to data log flow system values over an ...

Process temperature: -180 °C - 650 °C
Precision: 1, 0.5, 3 %

... Demineralized water Cold – / Heat exchangers Clean Rooms Temporary replacement inline flowmeters Verification inline flowmeters Leakage- / Blockage testing Flow measuring Pump ...

Process temperature: -1 °C - 80 °C
Precision: 1 %
Repeatibility: 0.3 %

DUS-TT-P-420 Portable Ultrasonic Flowmeter enables the user to do flow measurement checks at many points in a flow process without the need for a permanent installation. This universal ...

Volumetric flow rate: 30 l/h - 640,000 l/h
Process temperature: 0 °C - 140 °C
Process pressure: 0 bar - 11 bar

Magnetic inductive flow and volume measurement of media with a minimum conductivity >5 µS/cm For liquids, mash and pastes with solids content < 5% Long life span due to moisture proof and corrosion resistant design Vacuum ...

Process temperature: 32 °F - 150 °F
Process pressure: 5 psi - 80 psi
Precision: 4 %

VERSAMETER™ FLOW METER DIFFERENTIAL PRESSURE METER FOR PRECISE & RELIABLE CONTROL OF ATMOSPHERE GASES & LIQUIDS The VersaMeter™ represents a full range of precision flow ...

Volumetric flow rate: 5.5 l/min - 1,200 l/min
Process temperature: -40 °C - 350 °C
Process pressure: 16, 40, 100 bar

... for use with liquids, the Metri IC-FMS Flow Monitor builds on the success of the LPM. Featuring rugged radial turbine flow technology with a simple local display transmitter ...

Process temperature: 0 °C - 80 °C

Flowcont UN Flow sensor for conductive and nonconductive liquids No moving parts, compact design Process temperature up to 80 °C, process pressure up to 10 bar High chemical resistance thanks to seal-free sensor ...

... modern and precise flow meter with internal data logging. Equipped with two analogue inputs and two PULS inputs, can measure flow and other values, such as temperature and humidity. In ...

Process temperature: -10 °C - 150 °C
Precision: 0.5 %
Repeatibility: 0.2 %

Multi-channel ultrasonic flow meter is suitable for continuously measuring flow and heat of clean and uniform liquids without large concentration suspended particles or gases industrial ...

Process pressure: 10, 16, 40 bar

... electromagnetic flow meter are based on decades of practical experiences. They are highly reliable, easy to operate and very suitable for harsh conditions. Features： - Easy to install, various process ...

Volumetric flow rate: 0.2 m³/s - 20 m³/s
Process temperature: -25 °C - 70 °C
Process pressure: 20 bar

Product of Taiwan, Non invasive design, no down time for installation, no pipe cutting, maintenance at any time, significantly reduce installation and maintenance costs. Tube installation-zero tube damage, no blockage, no leakage and ...

... handheld ultrasonic flowmeter MF-200H adopts non-contact measurement method, and the sensor can be installed on the outer wall of the pipeline to complété the flow measurement, which is convenient and ...

Volumetric flow rate: 150 l/min - 2,000 l/min
Process temperature: 0 °C - 50 °C
Process pressure: 0 bar - 16 bar

Differential pressure flow meter »FUTURA«, Size 2, Measurement range 150 - 2000 L/min, Operating pressure 0 - 16 bar Differential pressure measuring system for detecting changes in flow ...

Process pressure: 70 bar

Pulser and solenoid single valve (PSV) for oil with G 1/2" (f) connection. FLUIDSFRESH OIL SECTORSAERONAUTIC | AUTOMOTIVE | MANUFACTURING INDUSTRY CERTIFICATIONSNOT TYPE-APPROVED FOR PUBLIC USE