- Hydraulics - Pneumatics >
- Valve >
- Flow control valve >
- Mival
Mival flow control valves
Product Feature - Excellent Flow Characteristics, High sensitivity and easy to adjust. - Proline flow control regulators with polymer, nickel-plated brass or métal ...
Pressure: 35 bar
It is used to control the flow for regulator or pipe system
DN: 50 mm - 400 mm
Pressure: 150 psi
KNIFE GATE VALVE non rising stem Technical characteristics: stem: non rising, SS420 body: cast iron EN-GJL-250 wedge: SS304 coating: blue epoxy powder, color RAL5015 EPDM seat, bronze nut Nominal pressure PN10 ...
BLUCAST
DN: 15 mm - 100 mm
Pressure: 150, 250 psi
Temperature: 70 °F
... ball valves which has O-rings that are constructed with FPM or EPDM while its seats are made from PTFE. It is available in PVC and Corzan CPVC versions. Its socket has a maximum size of 2 inches with threaded end ...
Hayward Industries, Inc.
The Flow-control valve is applicable on inlet or exhaust ports. Its gripper and fine cylinder speed is easy to control without loosing the pressure of the clamp. In ...
SAS Automation
DN: 2 in - 28 in
... Dorot Series 300 Flow Control Valve (’30-FR’) activates by the pressure of the pipeline. The valve limits the flow rate in the network to a preset value ...
Pressure: 0 bar - 315 bar
The Type MG throttle valve is used to regulate and control flow of fluid within the system, depending on the condition of the pressure and viscosity level. It can be integrated within ...
PONAR S.A.
Type: Plug valves Material: steel Description: Needle valves type DVG and DVG-R The needle valves are for piping systems to shut-off or control the flow ...
Electrical Post-Mix Taps with Flow Control to maintain the fluid flow constant depsite any pressure variations. Ideal for water, soda, soft drinks, fruit juice and wine. Operates with ...
DN: 80 mm - 400 mm
... Rotovalve Light valve model is specially designed for food applications. The body and the rotor are made up of stainless steel EN 1.4404 material. It promotes uniform discharge of the product, because of its rotary alternating ...
DN: 0.125 in - 0.75 in
Pressure: 210 bar
Temperature: -20 °C - 100 °C
Double-acting flow control valves available from 1/8" to 3/4" bsp, max.working pressure 210 Bar, adjustable oil flow rate from 0,5 to 80 Lt./min. (depending on the size)
F.lli TOGNELLA
Pressure: 207, 210 bar
Flow rate: 16, 47 l/min
This is an in-line restrictive type flow Theoretical performance control valve.
Comatrol
DN: 15 mm - 250 mm
Pressure: 16, 40 bar
Temperature: -50 °C - 200 °C
A Globe valves is a linear motion valve that is primarily designed to stop, start and regulate flow. Conventional Globe valves may also be used for isolation and throttling ...
DN: 0.5 in - 6 in
Pressure: 15 psi - 50 psi
Temperature: -20 °F - 250 °F
... temperature or pressure provisions. The flow sort for two-way valves is equivalent rate or altered equivalent rate for water or steam requisitions. The stream type of three-way valves ...
Clark
DN: 0.25 in - 0.5 in
Pressure: 980,000 Pa
Temperature: -10 °C - 150 °C
... epoch-making combination valve that enables manual flow control and fully on/fully off two-stage control by means of an air actuator. -The control ...
KITZSCT
DN: 20 mm - 354 mm
A butterfly valve is a valve which can be used for isolating or regulating flow. The closing mechanism takes the form of a disk. Operation is similar to that of a ball valve, ...
Highlight Technology Corp.
... chemistries, our PTFE Chemical Injection Control Valve will self-regulate and control the dosing flow rate to gallons per hour (GPH) of injected chemistry. Our iPolymer ...
DN: 1 in - 24 in
... Balancing Valves are designed specifically for heating/air conditioning systems in multi-story commercial buildings. Balancing Valves provide a means of adjusting and reading the flow ...
DN: 0.25 in - 6 in
Temperature: 1,000 °F
... These valves are both lighter in weigh and more durable than standard valves sold overseas. V-Seat, V-Slotted, V-Ball Characterized Seat Control Valves We have ...
DN: 0.375 in - 1 in
Flow rate: 30 l/min - 200 l/min
Throttle Valves Valve Size 04 : 3/8" 06 : 3/4" 10 : 1-1/4" G : Sub-piate Mounting T : Threaded Connections Sériés Number
Pressure: 39,200, 14,700 Pa
Flow rate: 10 l/min
... Features ■Wide control range Control of flow rates from micro flow rates (10 ml/min) to relatively large flow rates is possible, with precision within ...
Jufan Industrial Co., Ltd.
Pressure: 0 psi - 3,000 psi
Temperature: 180 °F
Flow rate: 0 us gal/min - 30 us gal/min
... SPECIFICATIONS The PRINCE valve is a pressure compensated adjustable flow control valve. By rotating the handle, the flow out the “CF”, or controlled ...
DN: 20 mm - 110 mm
UU001UNION FACTORY PIPE-WORKSHOP FITTING WORKSHOP MOULDS WAREHOUSE MATERIAL PREPARE MATERIAL TESTING PRESSURE TESTING FOR VALVES PACKING LINE WAREHOUSE LOGISTICS SAMPLE DISPLAY SHOWROOM
Pressure: 350 bar
C2.940 Flow control valve with locking screw C2.940 Flow control valve with locking screw max. operating pressure 350 bar nominal ...
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining