DN: 8 mm - 100 mm
Pressure: 16, 25, 30, 64 bar
Temperature: -20 °C - 130 °C
Reduced bore ball valve, F/F threaded, with pressed steel handle.
Rubinetterie Bresciane
DN: 15 mm - 80 mm
Pressure: 16, 25 bar
Temperature: -10 °C - 220 °C
... The control valves of A. Hock’s Series 1003 are designed for use in heating, ventilation and air conditioning (HVAC) systems. For instance, the three-way control valves are used for the ...
A.Hock MSR u. Electronic Service GmbH
DN: 15 mm - 150 mm
Pressure: 16 bar
Jacketed wafer ball valve use to keep media cold preservation or heat preservation, has high performance insulation structure, mainly use for heating high temperature and keep the medium ...
Wenzhou Pioneer Valve Co., Ltd.
DN: 0.25 in - 2.5 in
Pressure: 400,000 Pa - 1,600,000 Pa
... glycol. Brass valves are lighter weighted than stainless steel valves but have better corrosion resistance. While because brass valves are more expensive while the material is softer ...
DN: 15 mm - 150 mm
Pressure: 60 bar - 250 bar
Temperature: -10 °C - 300 °C
... resistant seats add to the durability of this particular device. These valves are made of either CrNi or other steels. Valves of this specific style have a great many uses in hot water heating ...
DN: 15 mm - 100 mm
Pressure: 15 bar
Temperature: -40 °C - 60 °C
... resistance, lightness and easy to use, EFFAST ABS true union ball valve BK1 is ideal for low temperature fluid transportation. Technical features: Solvent welded sockets BS Valve body designed ...
Effast
Automatic valves with heating chamber for bitumen .
COMAP SRL
DN: 10 mm - 50 mm
Pressure: 25 bar
Temperature: -20 °C - 150 °C
... development and manufacturing brass ball valves have lead to this new series. The valves can be used for generell heating circuits, as well as for many other applications, according to ...
DN: 20 mm - 100 mm
Pressure: 0 bar - 16 bar
Temperature: -10 °C - 150 °C
... wafer-ball-type shut-off valves, with the body in cast iron and a floating ball, manufactured in accordance with the severe product standards and the quality management of ISO 9001. Suitable for heating ...
Brandoni
DN: 200 mm
Pressure: 25 bar
Temperature: 200 °C
... efficiency and accuracy. KOSA software control valve selection, a code generation control valve comprehensive performance parameters, such as control valves, control valve ...
SuZhou KoSa Environmental Protection CO.,LTD
DN: 200 mm - 1,600 mm
Temperature: 260 °C
Neles lever valves are designed to air separation unit air inlet shut-off valve. They feature self-locking safety design for a specified differential pressure. The lever arrangement provides valve ...
DN: 125 mm - 500 mm
Pressure: 25, 16 bar
Temperature: -60 °C - 200 °C
... aggressive towards valve materials. Characteristics Valve tightness rate: Class "A" Service life: At least 25 years Warranty period: 3 years or 10 000 cycles Body materials: 1.1151 / P235GH ...
TEMPER
DN: 2 in - 88 in
Pressure: 10 bar - 160 bar
Temperature: 815 °C
... Zwick valves are used for industrial and exhaust gases, liquids, hot water or steam at lowest as well at high temperature zones up to 815°C. The TRI-CON is utilized extensively in the chemical, petro-chemical, ...
DN: 15 mm - 32 mm
Pressure: 28, 35 bar
Temperature: 110 °C
Giacomini
DN: 6 mm - 80 mm
Pressure: 40 bar - 100 bar
Temperature: -20 °C - 130 °C
... where special performance is required, for example in the installations of gas and water distribution, industrial and civil heating, water plants at medium and high pressure, hydraulics and pneumatics, oil and petrochemical ...
EFFEBI
DN: 1 in - 24 in
... Balancing Valves are designed specifically for heating/air conditioning systems in multi-story commercial buildings. Balancing Valves provide a means of adjusting and reading the flow ...
DN: 15 mm - 400 mm
... closure, approved by TÜV for water and steam applications in heating systems -Steam desuperheating for pressure reduction and simultaneous cooling with water injection -Special drain valves for boilers
ASCON TECNOLOGIC
DN: 40 mm - 250 mm
Control valves with pneumatic actuator -Flow control, mixing and distribution of liquids, steam and gases; two and three way -Steam desuperheating for pressure reduction and simultaneous cooling with water ...
ASCON TECNOLOGIC
DN: 15 mm - 20 mm
Threaded valves with 500 N actuator Valves from DN15 to DN20 -Heating, ventilation and air conditioning -Optional mechanical manual override -Self-calibrating proportional model
ASCON TECNOLOGIC
... DN 3/4” up to DN 2" with interruption of service, the system is used in the following industries: > Gas > Water > District Heating > Petrochemical
DN: 20 mm - 32 mm
Pressure: 10 bar
Temperature: 120 °C
... Diameter: DN20, DN25, DN32 ● Nominal pressure: 1.0MPa ● Supply voltage: AC24V ● Functional form: Electric heating valve, electric globe valve. ● Users can choose according to the demand.
DN: 20, 25, 32 mm
Flow rate: 4 m³/h - 21 m³/h
... three-way/two-way zone valve ZV is designed for controlling the output of water heat exchangers. Technical Specifications Cylindrical shut-off allows stopping the flow regardless of pressure Option for manual changing ...
2VV s.r.o.
DN: 15 mm - 50 mm
Pressure: 700,000 Pa - 1,600,000 Pa
Temperature: -5 °C - 185 °C
... °C • Pressure class PN16 • Differential pressure 0.8...1.6 MPa 3-way control valves MTRS is a range of 3-way control valves intended for use in heating and ventilation ...
Please specify:
Help us improve:
remaining