OMAL wafer valves

DN: 15 mm - 125 mm

Suitable for use in industrial chemical complexes, for gas and water distribution and food industry Body material from bar (A 105 or AISI 316) Thread ball body-cover Flanges drilled acc.to ANSI Possibility of equipment with handlever, ...

DN: 25 mm - 800 mm
Pressure: 500,000 Pa - 700,000 Pa
Temperature: -40 °C - 450 °C

Structure: Centre Sealing Seal Form: Auto Sealed/Force Sealed Material of Seal Surface: Soft Sealed Valve Body: Injection Trademark: Baodi Transport Package: Carton/Plywood Box

DN: 40 mm - 200 mm
Pressure: 5 bar
Temperature: 60 °C

... B16.5 Face-to-face length according to DIN EN 558-1-R20. For all gases according to DVGW worksheet G 260 Safety shut-off valve according to EN161 class A (closing time < 1s)

DN: 80 mm
Pressure: 6 bar - 16 bar
Temperature: -25 °C - 150 °C

Butterfly valve DN 80 PN6-PN10-PN16 & ANSI150 Wafer type body made of GGG40 with electric actuator 24-240V AC/DC seal FPM industry design sleeves: - FPM body material: - SG iron EN-JS1030 (GGG40) ...

DN: 50 mm - 300 mm
Pressure: 6 bar - 16 bar
Temperature: -20 °C - 180 °C

• wafer type butterfly valve designed according EN 593 • flange connections according EN 1092-2 - PN6/10/16, ASME/ANSI B16.5 class 150, ASME/ANSI B16.47 class 150 series A • face to face dimension ...

DN: 10 mm - 200 mm
Pressure: 16 bar - 160 bar

Wafer type ball valve is a flange end 1pc ball valve with super-short one piece body design, has short distance between the valve seat and the end flange, less medium ...

Pneumatic Butterfly Valve Pneumatic Actuator Wafer Butterfly Valve

DN: 8 mm - 150 mm
Pressure: 16 bar - 64 bar
Temperature: -196 °C - 300 °C

The pressure plate type ball valve structure: it is composed of valve body, valve cover and ball core. The ball core is connected by the valve stem, and the axis can ...

DN: 40 mm - 600 mm

Concentric electric butterfly valve / soft seal with resilient seat/low torque design Features Soft seal butterfly valve  - Body type: wafer or lug  - Body material: Ductile ...

Electrical Wafer Butterfly Valve D971F-16C has a pressure range of 0-1.0MPa and has a medium temperature of -20°C to +120°C. It can be operated via on and off mode and has a controlling voltage of AC24V, ...

DN: 15 mm - 100 mm
Pressure: 16 bar
Temperature: -20 °C - 180 °C

... BA102 Series Monoblock flanged ball valves are manufactured from cast iron, cast steel and stainless steel castings. Thanks to full-bore ball construction, they provide high capacity permeability. Due to the wafer ...

DN: 65 mm - 200 mm
Pressure: 0 bar - 10 bar
Temperature: 0 °C - 60 °C

... performance butterfly valve for closing or flow regulating applications. Greater flow rates and reduced pressure drop across the valve, along with fine control, integral seal and ease of actuation means ...

DN: 25 mm - 600 mm
Pressure: 0 bar - 16 bar
Temperature: -30 °C - 200 °C

... seats of double eccentric high performance valves today,butterfly valves are used from basic water applications to industrial applications and highly corrosive severe service applications    Butterfly ...

DN: 65 mm - 300 mm

Wafer Type butterfly valve with signal gearbox 2-1/2" DN65 - UL/FM Wafer Type butterfly valve with signal gearbox 3" DN80 - UL/FM Wafer Type ...

DN: 25 mm - 500 mm
Pressure: 150 psi
Temperature: -29 °C - 204 °C

The Series 20/21 resilient seated butterfly valve surpasses the high standards required in sanitary valve applications, and inherent flow characteristics and capabilities. Bray's Series 20 valve ...

DESIGN Center body consists of 1 part to be mounted between two flanges according to EN 1092-1 type 11 form B - PN10 (former DIN 25011. ANS1150 on request MEDIA Liquid and pulverised media with fibre parti- cles, viscous media, drain ...

DN: 15 mm - 125 mm

... steel is a 2-way high pressure ball valve manufactured by Gemels. It comprises of ball seats with nominal diameters ranging between DN 13 to DN 125 and O-rings made of NBR, FKM, EPDM, and MVQ. Additionally, the valve ...

DN: 350 mm - 1,000 mm
Pressure: 16 bar

... - Concentric butterfly valve with bonded vulcanised rubber linings Body type - Single flange wafer type Design pressure - 16 bar / 232 psi Nominal diameter - DN 350 / NPS 14 up to DN 1000 / NPS ...

DN: 50 mm - 1,200 mm
Pressure: 6, 16, 25 bar

The EX model knife gate is a uni-directional wafer valve designed for general industrial service applications. The design of the body and seat assures non-clogging shutoff on suspended solids in industries ...

Pressure: 0 bar - 16 bar

Our range of general purpose Butterfly Valves have been designed to provide a cost effective solution to your flow control and product shut-off requirements. Available in sizes from 50mm to 1000mm bore. Suitable for ...

DN: 100 mm - 600 mm
Pressure: 150 psi

... between the blade and the packing in a standard knife gate valve. ● Low-friction, acid-resistant Ni-Resist stem nut: Valves can operate with smaller actuators than standard knife gate valves.

Temperature: -20 °C - 450 °C

... Besides butterfly valve, we can also offer gate valve, ball valve, globe valve, check valve, safety valve and so on. If you have any ...

DN: 20 mm - 100 mm
Pressure: 0 bar - 16 bar
Temperature: -10 °C - 150 °C

Series B1 consists of wafer-ball-type shut-off valves, with the body in cast iron and a floating ball, manufactured in accordance with the severe product standards and the quality management of ISO 9001. ...

DN: 40 mm - 600 mm

... precisely designed MNC Knife Edge Gate Valve at genuine rate. Our company holds specialization in manufacturing, exporting and supplying of Gate Valve in India. The salient features of our Industrial ...

DN: 40 mm - 300 mm
Pressure: 6 bar
Temperature: -10 °C - 110 °C

Wafer NP6/10/16/20* - GG25 cast iron + Epoxy body - cast iron polyamide coated butterfly - EPDMGasket - Temperature : EPDM = -10°C +110°C