Cost-effective CP1E with Enhanced Expandability for Analog and Temperature Control • New CP1E CPU Units now available. - Lineup including CPU Units with built-in three ports: USB, RS-232C, RS-485. - The depth of CPU Units with ...
Programmer 48x96mm (1/8 DIN), single control loop. Allows the programming of 15 cycles/programs that can provide up to 45 steps/segments, all of which can be configured by the user as raise/maintain/lower. Programming mode of the work ...
Pixsys
The Saia PCD3.M5 is a high-performance CPU with a modular cassette design. With its fast processor and high system resources, it can run up to 13 communications interfaces and reliably perform even the most demanding control and communications ...
Saia Burgess Controls ( SBC )
Relay outputs, 2 changeover and 2 make outputs and 2 inputs (3 channels with manual
Saia Burgess Controls ( SBC )
The Saia PCD1 systems are the smallest programmable Saia PCD® controllers in a flat design. Along with the standard communication interfaces, integrated data memory and web/IT functionality, all controllers also have at least 18 integrated ...
Saia Burgess Controls ( SBC )
A modular architecture was chosen for the OMC 8000 PLC series. The core of the PLC is the main module, to which expansion modules up to 31 can be connected. These can be located in close proximity or ...
CP-9131 is the first version of ODOT Automation PLC, the programming environment follows the IEC61131-3 international standard programmable system, and it supports 5 programming languages such as Instruction List (IL), ...
ODOT PLC C-3351 Codesys V3.5 1.Reliable, compact, easy to expansion IO, can support up to 32 I/O modules. 2. It could be applied to multiple industries and scenarios such as mechanical processing equipment, sewage ...
... impressive. It works without a superimposed operating system which means that it can dedicate all its computing power to soft PLC and motion task applications. In addition to the real-time EtherCAT master, a number of ...
The new C6 COMPACT 3 control system is the right choice for the automation of applications with low to medium complexity. Its control concept is based on the Linux operating system and offers an open microservice architecture. Docker ...
... can be operated via the Safety PLC (FSoE master). The freely programmable Safety PLC and the Safety I/O module comply with the requirements of safety standards IEC 61508 SIL 3 and DIN EN ISO 13849-1 ...
By combining a controller (PLC), operator interface (HMI), I/O and networking into a single compact unit, OCS (operator Control Station) provides a better solution for Original Equipment Manufacturers (OEM), integrators ...
Horner Automation
... exchanging files with USB FLASH drives. -One (1) RS-232 and one (1) 485 port support RTU/Modbus Master/Slave, ASCII In/Out, and PLC/Drive downloadable protocols. -Networking features include a built-in 10/100 ...
Horner Automation
... files with USB FLASH drives -Two (2) RS-232 and one (1) RS-485 port support RTU/Modbus Master/Slave, ASCII In/Out, and PLC/Drive downloadable protocols -Networking features include: -Built-in ...
Horner Automation
10.4-Inch Color LCD Logic Panels The LP-A104 series logic panels are all-in-one devices featuring functions of PLC, HMI, and I/O modules with 32 input and 32 output contact points. The 10.4-inch widescreen TFT LCD ...
7-Inch Color LCD Logic Panels The LP-A070 series logic panels are all-in-one devices featuring functions of PLC, HMI, and I/O modules with 16 input and 16 output contact points. The 7-inch widescreen TFT LCD display ...
VEICHI provides OEM/ODM Service for TOP Customers. PLC series product planning PLC is divided into several series of ultra-small, general-purpose, bus type, high-performance type, operation control ...
SUZHOU VEICHI Electric Co., Ltd.
... /ODM Service for TOP Customers. VC3 series PLC is the third generation of high-performance small PLC developed by VEICHI. The dual-core architecture technology is adopted to continuously improve the ...
SUZHOU VEICHI Electric Co., Ltd.
... Service for TOP Customers. VC3 series PLC is the third generation of high-performance small PLC developed by VEICHI. Adopt dual-core architecture technology. With the addition of rich control functions, ...
SUZHOU VEICHI Electric Co., Ltd.
Programmable logic controllers for traditional automation solutions. At TR-Electronic you will find different PLC variants for specific requirements: SPCP is our slot PLC for integration ...
Efficient control technology in a particularly compact form Our HMI controllers are perhaps the most compact route into the world of precise, reliable and cost-efficient control technology. With compact HMI controllers from TRsystems, ...
The ES2 series is a compact PLC for basic sequential control. It is economical, highly efficient and functional. Applications HVAC, molding injection machine, big storage management, packaging machine, precise textile ...
... latest model, you can configure the MicroSmart Pentra PLC for remote monitoring and control. Using WindLDR software, you can remotely monitor or update the PLC programs without having to be near the PLC. Web ...
IDEC
• Dual port Ethernet • 1 channel RS232 port • 1 channel RS485 port • Built-In web-server and FTP • Data log in 16GB SD card • Built-In USB port • 8 channel high speed counter • Built-In Email and SNTP • Versions available with ...
The DIN rail mountable unit (165x115x40mm) of the Compact PLC APS300 is programmed with CoDeSys and provides compact solution for many applications with its I/Os and interfaces. Easy programming is facilitated by many ...
The 7 inch wide-screen touch panel of the CPS 500 is a complete solution as it combines controller, visualization, HMI and I/Os within one device. It is CoDeSys programmable entirely and has a compact and complete solution in its analog ...
CRANE VISION 360° Internet Access RTC E-mail datalog WMI Scada PLC CPU Module 24 VDC supply 9 Channel 24 VDC PNP input 6 Channel 24VDC 450mA short circuit protected PNP transistor output 3 Channel 400 kHz ...
... Special emphasis was placed on a compact design and flexibility. One of many advantages over conventional solutions based on PLC or process computer results from the possibility to change the parameterisation even at ...
Polyvalent safety automation device SIL3 PLe Discover the AWAX SOFT and enjoy COMITRONIC-BTI, simplifies your life : Optimal security control solutions complemented by small and medium machines. Great flexibility to replace all ...
- Inputs: 6 x digital AC DIN rail mounting Number of digital inputs: 6 Number of relay outputs: 4 Communication - Interface - support 2 channel with RS485 and 1 channel Baud rate - with program interfaces Protocol - 9600 bps / ...
Releco
... period at a special price. Here's everything you need for your start: 1 x EZRack 3-Slot Base Unit (EZRPL-DC-03B) 1 x EZRack PLC CPU, Fully Loaded with IIoT/I4.0 (EZRPL-CPU-1UE) 1 x Discrete 16-fold Input Module (EZRPL-IO-16DCI) 1 ...
Farewell to PLC's! The EZRack was primarily designed as an edge gateway for entry into Industry 4.0 applications. Hence, this system enables you to implement e.g. condition-based maintenance concepts quickly and easily. ...
... period at a special price. Here's everything you need for your start: 1 x EZRack 3-Slot Base Unit (EZRPL-DC-03B) 1 x EZRack PLC CPU, Fully Loaded with IIoT/I4.0 (EZRPL-CPU-1UE) 1 x Discrete 16-fold Input Module (EZRPL-IO-16DCI) 1 ...
... Mini-PLC equipped with a total of 40 built-in inputs and outputs, and designed to implement basic control systems for various applications such as lighting control, pumping control, ventilation and heating control, and ...
akYtec GmbH
Compact and easy-to-mount panel PLC The SMI200 is a programmable compact controller which can be used either as a compact HMI in addition to a powerful PLC or as a local compact PLC+HMI ...
akYtec GmbH
PR100 is a compact Mini-PLC designed to solve basic automation tasks in, for example, lighting control, pumping control, ventilation and heating control, and other simple control systems. With its minimum width, which ...
akYtec GmbH
Powerful mini PLC, ideal for integrating sequential control functions, processing and management of data on automatic machines or domotic systems, with control of analogue variables and digital/analogue blocks. A ...
Vision290 PLC with Touchscreen Graphic HMI & Snap-in I/O Modules The Vision290%u2122 is a powerful PLC with a built-in HMI Operator Panel, comprising a 5.7" graphic touchscreen display with a virtual ...
Unitronics
Vision350™-Flat Panel Color me Beautiful! Vision350™ is the smallest PLC with an embedded COLOR touchpanel This palm-size PLC offers exceptional capabilities and diverse I/O options. Its 3.5" TFT touchscreen ...
Unitronics
PLC * Up to 38 onboard I/Os: Digital, Analog and temperature measurement inputs, Relay or Transistor outputs * Shaft encoder inputs and PWM outputs * I/O Expansion Modules: enable up to 96 digital I/Os plus additional ...
Unitronics
... configurations with analog I/O expansion capability suitable for advanced analog monitoring and control. Key Features: • 3.8in HMI+PLC • Models with 12 or 14 I/O • Embedded RJ45 Ethernet Port • Modbus TCP or ...
IDEC
The All-in-One Solution for Seamless Automation Key Features: • Space-saving compact design • Large display • Time-saving and easy wiring • Environmentally-friendly • Wide range of control functions • High visibility, clear ...
IDEC
... capable of expanding up to 520 I/O. The next generation IDEC MicroSmart FC6A Plus PLC stretches performance beyond micro PLC limits! With its 2,060 I/O capacity, this PLC can control ...
IDEC
Fanless, Cable-less and Modularized Design Wide Range DC Power Input (9 ~ 36V) Rich Onboard I/O and Expansion Slots 2X RS-232 & 2XRS-485 Auto-flow Control Supported Easy Installation/Maintenance Intel® SSD Compatible
ARBOR Technology Corp.
Please specify:
Help us improve:
remaining