Parker Fluid System Connectors Division Europe manual valves

DN: 30 mm
Pressure: 900 mbar
Flow rate: 150 l/h

... the housing under high pressures using screw threads. The V30AM with a PTFE membrane functions as a pressure equalization valve up to the opening pressure point. The bursting membrane bursts once defined interior pressure ...

DN: 0.5 in - 48 in
Pressure: 600 psi - 15,000 psi

Pressure balance lubricated plug valves are metal seated valves providing a tight shut off ( 0 leakage ) sealing, valves shall be regularly lubricated along with their operation by injection ...

DN: 150 mm
Pressure: 10 bar - 16 bar
Temperature: -20 °C - 90 °C

Butterfly valve DN 150 PN10-PN16 Lug type GGG40 with notch lever with grey sleeve EPDM DVGW drinking water, WRAS, ACS, W270 sleeves: - EPDM DVGW drinking water, WRAS, ACS, W270 body material: - SG iron EN-JS1030 ...

DN: 50 mm - 300 mm
Pressure: 6 bar - 16 bar
Temperature: -20 °C - 180 °C

• wafer type butterfly valve designed according EN 593 • flange connections according EN 1092-2 - PN6/10/16, ASME/ANSI B16.5 class 150, ASME/ANSI B16.47 class 150 series A • face to face dimension according EN 558-1 ...

DN: 8 mm - 100 mm
Pressure: 16, 25, 30, 64 bar
Temperature: -20 °C - 130 °C

Reduced bore ball valve, F/F threaded, with pressed steel handle.

DN: 0.5 in - 2 in
Pressure: 16, 12.8 bar
Temperature: 120 °C - 200 °C

DN: 0.25, 0.125 in

Made of extruded brass (CLA-360) and forged brass (CLA-377). Ideal for compressed air, oil, water and vacuum systems. Allows the control of ideal flow according to the requirement of the system.

Vatac Three piece Bolted Body Ball Valves are available both in Forged and Investment Castings. In Straight through two ports or Multi-ports structures. Designed and manufactured to the most updated international standards ...

DN: 2 in - 72 in

Valves, Gaskets, Screws Pipes (seamless and welded) - Heat Exchanger Tubes - Elbows - Reducers - Tees - Flanges - Bends - Special items as per drawing - Valves and Actuators - Any other Piping ...

DN: 50 mm - 1,000 mm

... Segment Ball Valve is a high performance valve we have developed with advanced technology.It also called eccentric ball valve ,semi ball valve ,half ball valve ...

Pressure: 2,500 psi
Temperature: 0 °C - 320 °C

The Pressurizing Valve is designed to be used with Pressurized Aging Cells. 316 stainless steel pressure valve, certified for 2500 psi (17,237 kPa)

DN: 10 mm - 200 mm
Pressure: 16 bar - 160 bar

Wafer type ball valve is a flange end 1pc ball valve with super-short one piece body design, has short distance between the valve seat and the end flange, less medium retention, superior ...

DN: 8 mm - 150 mm
Pressure: 10 bar - 40 bar
Temperature: -196 °C - 300 °C

... port way Ball Type Floating ball,fixed ball,V-shaped ball valve,The 3-way ball valve Stem Blowout-proof stem Seat Sealing Integral body seat ,seat welded and overlaid Valve ...

... water valves, micro-valves, magnetic valves, mechanical valves, pneumatic valves. Check valves are available with various connections ...

DN: 2 cm - 3.5 cm

• Lower permeability and pressure loss compared to elastomer valves • High system safety and chemical resistance • Maximum residual drainage and reusability due to better gas tightness • Long and position-independent ...

IVEK’s Ceramic Liquid Valves offer a durable high-performance alternative to “plug valves” commonly used in instrumentation Traditional polymer valves have a limited life due to material ...

DN: 65 mm

The water stop valve is used to stop water of fire hose, controlled by ball valve, easy to operate with its strong practicality, light weight. It can block the water flow quicky when the fire hose bursts, ...

DN: 1, 2 in
Pressure: 2,500 psi
Temperature: 260 °C

... service time, thanks to top entry design and easy-to-service-seat Design offers choice of angle and globe valves Standardised 1" and 2" valves with variable trim options Choice of materials for body, ...

DN: 6 mm - 28 mm
Pressure: 414 bar
Temperature: -54 °C - 316 °C

Needle valve is a fine-tuning valve with a needle-shaped valve plug, which is mainly used to adjust the air flow. The fine-tuning valve requires the valve ...

... systems. They are normally operated remotely by air cylinders, electric or pneumatic actuators, although manual versions through the customary hand lever, handwheel and reduction gearboxes can be accommodated.

DN: 40 mm - 300 mm
Pressure: 10, 16 bar
Temperature: 60 °C

Dueker gate valves – for water and gas.Reliable, safe and cost-effective. Dueker gate valves are used to great effect all over the world. There is a good reason for this – valves have ...

DN: 50 mm - 350 mm
Pressure: 1.6 MPa

DCL series high vacuum ball valves are widely used for silicon panel production equipments in Solar energy industry and semiconductor industry. Valves can be used for pipe pressure from 105Pa to 1.3*10-4Pa ...

PTFE high vacuum valve The properties of high vacuum and PTFE rubber O-rings at the top could arrive at the perfect effect of high vacuum and corrosion resistance. PTFE high vacuum rod with PTFE rubber O-ring YZ0501 ...

DN: 40, 50 mm

Butterfly valve No.1 ----Aluminum alloy interface butterfly valve Model Number:DN40 - Application:General - Material:HDPE Temperature of Media:Normal - Pressure:Medium Pressure - Power:Manual Media:Water ...

Depending on the version, the 5A venting valve is suitable for venting harmless gases, for drawing off aggressive media or for special drainage on manifolds. Important for the application: The valve is ...