Diameter: 3 mm - 14 mm
Operating pressure: 0.5 bar - 12 bar
Series of push-in fittings with reduced dimensions and new collet and release collar. They are for connecting nylon and polyurethane tubes. Available in various configurations (studs, elbows, T, Y) and with threads Gas ...
Diameter: 2.5 mm - 15 mm
Operating pressure: 0.5 bar - 12 bar
Series of rapid fittings for connecting nylon and polyurethane tubes. They should be used in all those applications where a safer tube-fitting connection is required. Available in various configurations ...
Diameter: 0.125 in - 1 in
Operating pressure: 0.5 bar - 12 bar
Series of standard fittings available in various configurations to adapt the connections of every installation according to one’s requirements. With threads Gas taper (BSPT) and Gas parallel (BSP).
Diameter: 18, 20, 12, 16, 10 mm
Operating pressure: 1,200 bar
Standards adaptors are also available individually. If among our standards adaptors or high pressure adaptors you don't find what you are looking for, our Design Office remains at your disposal to design and manufacture the adaptor ...
AREMECA
Diameter: 40 mm - 400 mm
Reusable aluminum coupling system, suitable to be fitted to MARMOTECH® and STEELBLAST hoses,including: • Aluminum semi-flanges according to UNI EN 1092-1 PN 10 (ex UNI 2277) • Flat black SBR gasket • Bolts, nuts ...
Diameter: 4, 6 mm
Operating pressure: 10 bar
... male connector for flexible tube - Male thread connection: G 1/8" - Corrosion-resistant - High level of gas tightness - Material of sample-contacting parts: PVDF Hose and tube screw connectors as well ...
M&C TechGroup Germany GmbH
Diameter: 6 mm
... with barbed fitting for flexible tube -Barbed fitting: DN 6 -Corrosion-resistant -High level of gas tightness -Material of sample-contacting parts: PP hose nozzles, G-ISO thread, material: PP Hose ...
M&C TechGroup Germany GmbH
Diameter: 8 mm
... barbed fitting for flexible tube Thread size: G 1/8" Barbed fitting Corrosion-resistant High level of gas tightness Material of sample-contacting parts: PP hose nozzles, G-ISO thread, ...
M&C TechGroup Germany GmbH
Diameter: 10 mm - 100 mm
... Benefits Of Our Threaded Fixings & Fittings: Manufactured from a selection of high quality materials Resistant to weathering factors, acids and rust Provides a strong and secure fixing point Mix of ...
Diameter: 0.25, 0.13 in
SWIVELS These have single or double outlet connections for use with standard flanged nozzles and filters to enable positioning of sprays.
KROMA MEC SRL
KROMA MEC SRL
Diameter: 0.25 in - 4 in
Exd IIC Conduit Seals prevent the passage of gases, vapours or flame through the Exd conduit system, from one part of t he electrical system to another. Threads: - BSP TAPER BS 21 - NPT (ANSI B1.20.1) Materials: ...
KROMA MEC SRL
Diameter: 6 mm - 60.3 mm
Connecting two pipes Aseptic flange connection according to DIN 11864-2 with buttweld ends for orbital welding with O-Ring. Material: 316L (1.4435), Fe < 0.5%. Sterilizing temperature: 150°C. With marking of batch number, material, ...
CONNECTORS
Diameter: 6 mm - 38 mm
NORMYDRO
HYDRAULIC INDEX : *HYDRAULICS FITTINGS (STEEL AND STAIN) * STAIN FITTINGS * CLAMPS * STELL FITTINGS SERIES 100 AND 250 KG BRIGGS AND SOCKET WELDING 3000 AND 6000 IBS * ...
NORMYDRO
NORMYDRO
... procedure • AUTOMATIC TIGHTENING LIMIT: contact between AR3-FORM® ring and fitting body because of the nut tightening effect compels the operator to stop tightening • CUTTING RING FITTINGS INTERCHANGEABILITY: ...
Rastelli Raccordi
The model 53 Socketweld fitting is designed to be socket welded directly to a 2” socket end. Possible configurations include welding to an industry standard “Sockolet” fitting, which is then welded to ...
Rohrback Cosasco Systems
Diameter: 10 mm - 80 mm
Threaded hose nozzles series SAS Threaded hose nozzles of SAS series are available in nominal diameters DN10 - DN80. By default they are manufactured and offered in stainless steel AISI 316L. The flexible ...
Diameter: 2 mm - 35 mm
Operating pressure: 250 bar
... materials on demand. Approvals SVGW, DVGW and ÖVGW Adaptor stem, male thread British Standard Pipe (BSP) and metric fine thread DIN 3852. Tapered form C, parallel form B. Thread with ...
SERTO
Diameter: 4 mm - 15 mm
Operating pressure: 125 bar
... materials on demand. Approvals SVGW, DVGW and VGW Adaptor stem, male thread British Standard Pipe (BSP) and metric fine thread DIN 3852. Tapered form C, parallel form B. Thread with ...
SERTO
Diameter: 1.6 mm - 28 mm
Operating pressure: 250 bar
... request Adaptor stem, male thread British Standard Pipe (BSP) and metric fine thread DIN 3852; tapered form C; thread with sealing form B. NPT-thread according to ANSI B1.20.1. For sealing ...
SERTO
CROSS PIECES Cylindrical thread 4 x inside thread
Diameter: 5.5 mm - 45 mm
... 90°, swivel or fixed fitting which is screwed into the female thread of the adapter. Since RNA-316 cable-hose fittings are available up to 1.1/4”, the RNC-316 1.1/2” to 3” adapter in ...
Anamet Europe
Diameter: 5.5 mm - 45 mm
... swivel or fixed fitting which is screwed into the female thread of the adapter. Since BNC-316 cable-hose fittings are available only till 1.1/4”, the BNC-316 1.1/2” to 3” adapters in ...
Anamet Europe
Diameter: 5.5 mm - 62 mm
... 90°, swivel or fixed fitting which is screwed into the female thread of the adapter. Since RNA-316 cable-hose fittings are available up to 1.1/4”, the RAC-316 1.1/2” to 3” adapter in ...
Anamet Europe
Diameter: 25 mm - 100 mm
... conveying equipment, vacuum hopper, suction conveyor, dosing system pelleting machines/ tablet presses PROPERTIES special threaded sealing insert matches the outer hose contour easily and quickly fitted re-usable vibration ...
Diameter: 0.38 in - 2.5 in
Operating pressure: 100 bar - 315 bar
OMT Group Spa produces a complete range of couplings for gear pump. The range of couplings for gear pump in aluminium for low pressures (max working pressure 180 Bar) consists in: RA series with two fixing holes RP series with ...
Diameter: 0.25 in - 1 in
Operating pressure: 17.23 bar
... to galvanic and stray current. It is installed between pipes made from dissimilar metals, and features a female brass pipe thread to female solder connection. It consists of a union nut, two tailpieces, and a gasket that ...
Watts Water Technologies
Diameter: 0.25 in - 2 in
Operating pressure: 20 bar
The 2062 Series is a series of stainless steel screw couplings manufactured by Sferaco. Equipped with a "lost wax" moulding, a male conic threaded BSP, and a female cylindric threaded ...
SFERACO
Diameter: 16 mm - 50 mm
... connection elements: 90° elbow, straight joint, joint for pipe-box connection and joint for pipe-sheath connection. The new fitting does not have assembled parts and the seal is directly overmoulded onto the body, thus ...
Diameter: 0.5 in
Operating pressure: 16 bar
TECHNICAL DATA Material Body and thrust ring: nickel plated brass Thread Metric, taper and parallel Seal NBR rubber Clamp Stainless steel AISI 316 Size M5 ÷ G 1/2 Fluid Air, water, oil, steam Working temperature ...
Waircom
Diameter: 3 mm - 5 mm
Operating pressure: 18 bar
Straight screw-in fitting, without O-ring, G 1/8 o., for hose , AF 14, Working pressure max. , nickel-plated brass
RIEGLER & Co.KG
Diameter: 0.13 in - 0.5 in
Operating pressure: 400, 630, 315 bar
T-male stud coupling, male thread BSPT, light and heavy duty series
Armaturen Arndt
Diameter: 6 mm - 42 mm
Operating pressure: 250, 400, 630, 160, 315 bar
Armaturen Arndt
Diameter: 6 mm - 42 mm
Operating pressure: 160, 315 bar
GR-L straight reducing coupling, light duty series
Armaturen Arndt
Fittings are brass-made, highly resistant and long lasting. The production is constantly subjected to rigorous tests, to guarantee high quality levels.
FINI
Please specify:
Help us improve:
remaining