- Metrology - Laboratory >
- Analytical Instrumentation >
- Sampler >
- PerkinElmer
PerkinElmer samplers
This syngas sampling panel is designed to condition the gas sample before it passes through the analyzers, the aim being to cool the sample and trap the tars before analysis.
The TAR PROTOCOL samplin system allows sampling synthetic gases (syngas) from pyrolysis gasification. This solution enables the characterization of organic contaminants such as tars (BTEX, PAHs, phenol and derivatives, thiophene, etc.) ...
1-8 Gas Sensor Modules Toxic - Oxygen - Combustible - VOCs Meterological Sensors Wind speed - Wind Direction - Temperature - Humidity Atmospheric Pressure - Particulate Matter - Rainfall - Noise Serial Output - Modbus RTU 9600 bps Installation ...
New generation of Grab Sample Systems for Hazardous Chemicals such as Liquefied Chlorine, HF, etc. Simple, Directly Representative, Safer, Better Industrial Hygiene and More Environmentally Friendly.
BIAR Sampling systems
Application: Machine Condition Monitoring The ASP is a self-contained sample changer and processor designed specifically for use with the LaserNet 200 series instruments. It provides the user with automatic and unattended processing ...
The 6712 sampler features a vacuum-formed ABS plastic shell to withstand exposure and abuse. Its tapered design and trim 20-inch (50.8 cm) diameter result in easy manhole installation and removal. Large, comfortable handles ...
IJINUS
ISCO BLZZRD refrigerated water sampler is a portable refrigerated water sampler with active cooling from either AC or battery power. Its controller offers all advanced controls, interfaces, data logging, ...
IJINUS
... Pressing the go button starts the sampling routine. The auto-sampler can be programmed to an alternative set up, without losing the original program setup. It’s a Great Little Sampler! The GLS Sampler ...
IJINUS
... samples (200 barg max. See specifications for details) for use with SADPmini2, SADPmini2-Ex, SADPmini, SADPminiEx. The Sampling System is Compact, Portable, Light Weight, Rugged and Easy to Use. Simply connect the ...
Alpha Moisture Systems Ltd
Standard Dewpoint Sampling Systems are engineered to extract, condition and analyse a representative sample of process air or gas, which is then safely vented to the atmosphere or returned to the process. Depending on ...
Alpha Moisture Systems Ltd
Custom Dewpoint Sampling Systems are engineered to extract, condition and analyse a representative sample of process air or gas, which is then safely vented to the atmosphere or returned to the process. Depending on the ...
Alpha Moisture Systems Ltd
sampling units guarantee the collection of a representative sample for testing in accordance with ISO 5667, allow sampling: - in proportion to the time - in proportion to the flow - depending on the event (e.g. exceeding a preset ...
... starts with the inspection of incoming goods! An all-layer sample of bulk goods is no longer a problem with PowderProof®, the sampler for powders and granules. PowderProof® is the practically proven professional solution ...
Bürkle
The slot sampler is manufactured by Bürkle, and has the smallest possible gap between the inner and the outer tube. It is easy to clean with removable tip, and also has a color coding in multi and uno sampler. ...
Bürkle
The Sampler For The Pharmaceutical Industry Series Novartos Multi, is manufactured by Bürkle. The series features the possibility to withdraw a double-sample without inserting the lance repeatedly into the massive material. ...
Bürkle
TheE-SEQ-FRM from Met One Instruments, Inc. is a automatic particle sampler The E-SEQ-FRM is a US-EPA-designated reference airborne sampler for PM2.5, PM10 and PM10-2.5 sampling methods. TheE-SEQ-FRM ...
CleanAir Europe
TheE-SAMPLER is an ambient air particle and dust counting device. TheE-Sampler uses a double laser and gravimetric technology for the real time monitoring of aerosols and particles. Equipped with a data ...
CleanAir Europe
The CleanAir isokinetic sampling system allows the sampling of Polycyclic Aromatic Hydrocarbons (PAH). It is a variation of the basic model (dust), but in a version that includes nozzles and a Pyrex sheath with a bubbler ...
CleanAir Europe
For batch sampling applications using Chem 20 and Chem 20-HI particle counters The SLS-20 Syringe Liquid Particle Sampler enables Particle Measuring Systems’ Chem 20TM or Chem 20-HI particle counters to operate in batch ...
Particle Measuring Systems
The SLS Syringe Liquid Particle Sampler from Particle Measuring Systems uses a precision syringe and simple flow-path for delivering chemical samples from a sample vessel or chemical container, directly to the particle ...
Particle Measuring Systems
... Counter, within Particle Measuring Systems PMS comprehensive liquid particle counter line, includes: an SLS-1000 Syringe Sampler, a LiQuilaz® eSeries Light Obscuration Spectrometer and SamplerSight Pharma Software, allowing ...
Particle Measuring Systems
... number one selling sampler from Sampling Systems. The LiquiThief is essentially a big syringe and is ideal for sampling low viscosity liquids, suspensions and thin oils. LiquiThief samplers are made ...
Sampling Systems Ltd
... The Slot Sampler is easy to use. It consists of an inner and outer stainless steel tube. Push into the powder in the closed position. When inserted turn the handle to open the sampler - this allows ...
Sampling Systems Ltd
... diameter version is available in various lengths. SIMPLE TO USE Push the sampler into the powder and rotate the handle to open the sampler and take the sample. Close and remove the sampler. ...
Sampling Systems Ltd
The sampling system is a customized equipment. There are an alarm and relay output on the system. Features The sampling system is a customized equipment. There are an alarm and relay output on the system.
The model GSP is a gas sampling pump, with LED(Power/Fault) and relay(Fault), and easy to use to display and signal output by assembling a gas detector. Features Relay(Fault). LED(Power/Fault). CNS approved for hazardous ...
... output by assembling the 9500-series gas detector. Features Relay output(Fault). LED(Power/Fault). Gas sampling system is assembled by the MGSP and 9500 gas detector. Low maintenance cost and ...
The HECHT Vacuum Sampler is ideally suited for closed and automated inline-sampling of powders and granulated materials from a product column. The special design for flush-wall-installation was recently patented: Due ...
Hecht Technologie GmbH
The HECHT Spoon Sampler is a convenient inline sampling system with a flexible sampling vessel (spoon) that can be operated either pneumatically or manually. The spoon sampler is perfectly ...
Hecht Technologie GmbH
The slide sampler is specially built to meet the high quality and accuracy requirements of the pharmaceutical, chemical and food industries. The stable mechanics and efficient mechanism make the sampler ...
Hecht Technologie GmbH
... control sampling ★ Application: Wastewater plant, power plant, tap water Brief Introduction This automatic water sampler is widely used in the pollution sources, sewage treatment plants, which is used with COD, ...
- Sample tube with welded thread connection - For point-selective sampling - Sample tube can be used with an ATEX-certified gas sample probe - Male thread connection: G 3/4" - Length: 1 m [≈ 3.3 ft] without connection thread - Sampling ...
M&C TechGroup Germany GmbH
- Sample tube with volume displacer for applications with low sample gas flow - For point-selective sampling - Sample tube can be used with an ATEX-certified gas sample probe - Male thread connection: G 3/4" - Length: 1 m [≈ 3.3 ft] without ...
M&C TechGroup Germany GmbH
- Sample tube for lower sampling temperatures - For point-selective sampling - Male thread connection: G 3/4" - Length: 1 m [≈ 3.3 ft] without connection thread - Sampling temperature: max. +90 °C [+194 °F] - Material of sample-contacting ...
M&C TechGroup Germany GmbH
Sentry single line sample panels are pre-piped assemblies used to simplify the conditioning of steam, water or non-hazardous process samples. With the addition of cooling water, safe and representative samples can be obtained from individual ...
Sentry Equipment
Suitable for use with any benchtop bioreactor, the Super Safe Sampler allows researchers to withdraw the tiniest samples without losing any culture liquid. The sampler is fully aseptic, and its patented ...
These units are designed to give the user easy selection of measurement from various sampling points, for example from multiple gas cylinders, exhaust stacks or engine test cells. It is often mounted upstream of a main filtration unit ...
... from heated and pressurized reactors has been sought for many years. Parr Instrument Company’s new 4878 Automated Liquid Sampler can extract up to six liquid samples at a user-defined interval without the need for the ...
Tailored and custom built to meet your custom specific requirements; no matter how complex Several lines can run from one system, enabling the monitor of single or multiple gases, from various locations Ongoing support, maintenance ...
A portable sample system manufactured in the UK by Shaw Moisture Meters, for the range of SDHmini dew point hygrometers. An effective sampling system, which ensures the sample pressure and flow are suitable for quick and accurate dew ...
Shaw Moisture Meters
... Model SU2 Sample System The Shaw Moisture Meters SU2 sample system is designed for gas or general compressed air sampling and to provide ideal sampling conditions for dewpoint measurement. Simple to setup and install, the SU2 sample ...
Shaw Moisture Meters
... The SHAW SU3 sample system comprises of a filter unit, pressure regulator (200 bar) and flow meter mounted on a sample plate, which can be attached to the side of the SHAW SADP/SADP-D portable dewpoint meter carry case. Designed for ...
Shaw Moisture Meters
Efficient, reliable and mobile gas sampling system for field use Rehabilitation Investigation of contaminated sites Environmental analytics Laboratories … and other fields Measurement technology ...
... ambient conditions. ATI has developed a solution to this problem with a gas sampling system that also conditions the sample by removing water vapor. The Dri-Gas sampling system draws gas samples from ...
Analytical Technology
For direct sampling of high-temperature aerosols from hot exhaust gas, e.g. from fireplaces, combustion processes or engine exhausts. Built for temperatures of up to 500 °C (932 °F). FEATURES Sampling from hot gas with temperatures ...
GEA Nu-Con manufactures a range of sampling systems to suit sanitary applications
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining