- Materials - Tools - Components >
- Standard Mechanical Component >
- Non-threaded cap >
- PÖPPELMANN
PÖPPELMANN non-threaded caps
Diameter: 31 mm
FN fuel tank cap in galvanised steel, with external bayonet coupling passage diameter 31 mm and sealing gasket. It is available hermetic version. FN fuel cap is usually used for fuel tanks in agriculture ...
Tappi Stampati
Diameter: 16 mm - 170 mm
SHUTTER Elastomer-coated metal housing blanking plug
Techn. Data / Items supplied • - ABS, Injection Mould, grey • - weight = 0.001 kg/piece
Minitec
Diameter: 10 mm
This diameter clip cap lets you mount your wheels on an axle. You just need to hammer on the domed surface (which will slightly deform) in order to drive it onto the axle.
Diameter: 9.9 mm - 60.2 mm
... Plastic Caps for BSP and NPT Threads Material: LDPE (Natural) Flanged for Easy Removal Use as Thread Protector or End Cap Flanged Plastic Caps for BSP and NPT ...
MOCAP LTD
Protection caps used for covering the connectors. Description PROTECTION CAPS They are used in several sector and their purpose is to protect the electrical parts like battery polarity, electrical ...
Available directly from Ezi-Dock Systems at low cost and with swift supply, these simple but effective blanking caps will meet the needs of pharmaceutical and bioprocessing laboratories and manufacturers. Supplied ...
To seal oblong holes Prevents water damp and dust ingress
ARaymond Industrial
Diameter: 6.4 mm - 55.1 mm
Molveno fasteners manufactures and distributes Plugs and Caps in a wide range of versions. We are able to meet any needs of installation and application.
Male Dust Cap(Mating with 25A Male Connector) Protection Level - IP68 Plastic Material - Thermoplastic O-Ring - Silicone Rubber
Suzhou Exceedconn Technology Co.,Ltd.
... with Trico’s Grease Fitting Caps. Trico’s Grease Fitting Caps, when used in combination with Trico’s Grease Gun Bands, ensure you are receiving the right product in the right amount at the right location. Grease ...
Diameter: 12, 15, 13, 18 mm
Operating temperature: -30 °C - 70 °C
Material: PE-LD Colour: Black Flammability: V2 (UL94) Working temperature: -30°C ~ +70°C All dimensions are in mm
Fastpoint Srl
6: Permanent Bases Tuff Built’s Pro-Series Permanent davit bases are designed for permanent installations at locations where repeated or frequent use is required. Permanent bases are available in a variety of designed, finishes, and ...
NO.Number for ProductApplicationMeterial 01DEC2020Assemble part for 20mm profile frame(연결부품)PVC/AL 02DEC3030Assemble part for 30mm profile frame(연결부품)PVC/AL 03DIC4040Assemble part for 40mm profile frame(연결부품)PVC/AL 04DEC4040Assemble ...
JM Cap for 20×20 profiles Part# C0201-5.0mm C0201-3.0mm Material: Nylon Color: Black Uesd for: 20×20 series profile Hole: 5.0mm 3.0mm JM Cap for 20×40 ...
Gray closing cap for Profile - Groove 6 Size 30 - Measurement: 13 mm x 22,5 mm - Type of material: Polyamide
Milper sas
Diameter: 12 mm - 105 mm
Operating temperature: -55 °C - 110 °C
HSSE/HSEC (Cable End Caps With Spiral Adhesive) • Crosslinked Polyofeline • Excellent Sealing properties • UV and weather resistance • Operating temperature: -55° C to +110°C • Min. full recovery temp.:120°C • Available ...
Arihant Panel Fittings Private Limited
DESCRIPTION - Black Luster® Steel Push Caps provide best in class decorative appearance and better corrosion resistance than black oxide and zinc plated finishes. Resistant to 1,000 hours of salt spray per ASTM B117*. ...
Blind Hole Cover Caps, Protective Caps, Caps for Screws, Insulation Boots Since 1964 the innovative family business Ettinger GmbH has been your dependable partner for electronic and ...
Diameter: 8.4 mm - 172.2 mm
... and circular cross section of the cap prevent the cap from splitting during fitting and use. Our standard colour is black, ensuring the UV stability of the cap and preventing premature ...
RADOLID Thiel
Diameter: 2.5 mm - 104.6 mm
Operating temperature: -51 °C - 315 °C
REFERENCE: SC DESCRIPTION : Silicone Cap 315ºC MATERIAL: High temperature Silicone 315ºC See the material data sheet DIMENSIONAL TOLERANCE The dimensional tolerance of the Silicone Cap is according ...
Diameter: 5.4 mm - 108 mm
MA type is a universal protection cap developed for perfect coverage of straight metal, plastic pipes and tubes or external threads in many different automotive applications. It has an internal rib, which gives a good ...
DBI Plastics
Diameter: 50 mm - 1,250 mm
Tender specification PVC HOKA PVC end cap plastic fitting round with interior stop for connecting pipes in an exhaust system by welding process. Socket inside diameter on the basis of DIN 8062, manufacturing process: ...
Diameter: 12 mm - 25 mm
... Brass Mirror Cap. We have wide range available like Shelf Button Bat, Brass Round Mirror Cap, Brass Square Mirror Cap, Brass Swastik Mirror Cap, Brass Triangle Bat, Brass ...
Paani Precision Products LLP
Diameter: 1.78 mm - 22.23 mm
POWDER COATING and CATAPHORESIS MASKING PRODUCTS / MASKING CAPS Our products are made from special raw materials for using in especially for Painting Plants. The products shaped in special ovens . The Masking Products ...
MEP TEKNIK
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining