DN: 8 mm - 14 mm
... hide. Our valve family is available in every configuration needed in paint circulation drop stations from 1/4″ to 5/8″ or 8mm to 14mm sizes- threaded, bulkhead threaded, compression, ...
DN: 0.25 in - 0.5 in
Pressure: 0 bar - 3 bar
Temperature: 0 °C - 60 °C
... expertise in fluoropolymer valves have allowed us to provide you with an entrapment free, full flow-through component. These high-purity valves are available in numerous configuration alternatives in ...
DN: 8, 2, 1 in
Pressure: 0 bar - 16 bar
Temperature: 0 °F - 400 °F
Protecting compressed air quality – no overwhelming of the air treatment system Compressed air treatment systems are designed for a certain rate of air flow which, when the system is operating at full load, pushes against the pressurized ...
DN: 0.5 mm - 2 mm
Pressure: 30, 40, 65 bar
The RKE electric ball valve automatically opens or closes the compressed air tank via the control unit or connects and closes areas of the network from the compressed air supply as required. This prevents e.g. an unnecessary ...
Temperature: 0 °C - 650 °C
... 100 Metric or Whitworth thread Available for tube diameters from DN3 up to DN40 Temperature-resistant up to +650 °C (dependent on the material used) Three-part union consisting of weld-on stub, clamping nut and weld-on ...
DN: 20 mm - 63 mm
Pressure: 16 bar
Temperature: -35 °C - 120 °C
DN: 0.5, 0.25, 0.75 in
Temperature: -20 °C - 50 °C
Opening / closing system: The most frequent application of these valves is in installations where the flow is interrupted regularly. Valve design: Needle valve Maximum nominal pressure: ...
DN: 19 mm - 24.5 mm
Pressure: 25 bar
Temperature: -20 °C - 50 °C
Opening/closing system: The most frequent application of this valve is in installations where the flow is interrupted regularly. Valves for pressure gauges
DN: 40 mm - 300 mm
Pressure: 15, 11, 24, 17.6 bar
... parts of the gate valve are called the gate plate. The gate plate moves up and down and is perpendicular to the direction of fluid. The gate valve can only be fully opened and closed, not used for regulating ...
DN: 0.5 in - 2 in
Pressure: 200 psi
Globe valve refers to the valve with the shutoff (disc) moving along the center line of the seat. According to this form of disc movement, the seat opening changes in direct proportion to disc travel.Because ...
... high-quality, hot-forged brass CW617N with high strength. The Stahlmann range of fittings includes unions, elbows, tees and ball valve fittings. The unique design of the fittings ensures a tight and durable connection ...
DN: 2 mm - 17.5 mm
Pressure: 1,400 bar
Temperature: 10 °C - 80 °C
... aforesaid valves allow not only to fill, but also to carry out the delivery under pressure with nominal diameters being double compared with the valves that are normally on the market for the pressure ...
DN: 2 mm - 8 mm
Pressure: 1,400 bar
Temperature: -20 °C - 80 °C
... avoid contamination. Specific selection of metallic materials to avoid hydrogen embrittlement. Special hard treatments for Valve stem Leakage test on seat and packing with nitrogen at maximum operating pressure.
DN: 0.5 in
Pressure: 103 bar - 138 bar
Temperature: -17 °C - 204 °C
... industrial stainless steel ball valve line is intended for general purpose use. Stainless steel ball valves are intended for use in the fully open or closed positions. Depending on the application conditions, ...
Watts Fluid Air
... 8 Stainless Steel Cast •Applicable Fluid : Air, Gas, Oil, Steam, Water For complete product overview and details on Ball Valves - Stainless Steel, PT Male / PT Female see the sections below:
DN: 32 mm - 63 mm
Pressure: 16 bar
Temperature: -10 °C - 45 °C
Ball valve KHW for water Gasket: EPDM 1/4 turns for opening and closing DVGW test mark: DW-6210CQ0059 Note: For this purpose, there is a suitable actuating linkage KBS for wrench Areas of Application The ...
DN: 1 in
Pressure: 20 bar
Temperature: -10 °C - 66 °C
NAFFCO Gate Valve is usually installed in Dry riser inlets and Fire Hose reel assembly where unauthorized operation has to be avoided.A typical application of this valve is installing these at inlet pipe ...
DN: 0.125 in - 0.375 in
... This model can be fitted with a detachable scale for fine adjustment of the flow rate. Threaded end fitting options R 1/8, 1/4 or 3/8 on both sides. External thread DIN 259.
DN: 25 mm
3-way ball valve ABS, d=25mm with T-bore. • Ball position imprinted in lever • Integrated fixing system with mounted threaded bushes • Lever with integrated tool for adjustment
DN: 20, 25, 32 mm
Flow rate: 4 m³/h - 21 m³/h
... three-way/two-way zone valve ZV is designed for controlling the output of water heat exchangers. Technical Specifications Cylindrical shut-off allows stopping the flow regardless of pressure Option for manual changing ...
2VV s.r.o.
DN: 6, 8, 12, 20 mm
Temperature: -40 °C - 60 °C
... SF6 Gas insulated busbar systems SF6 insulated inflatable cabinet SF6 insulated RMU Feature of CV Self-Sealing Valve Self-sealing: If the device or connector is removed, self-sealing can be done It ...
... applications. We have produced relief and check valves for since the time of the Apollo and Gemini programs and more recently for the International Space Station and the Orion Spacecraft. Our pressure relief valves ...
DN: 4 mm - 25 mm
Pressure: 100 bar - 500 bar
Temperature: -40 °C - 200 °C
2-way ball valve with BSP or NPT female thread designed for high pressure hydraulic or industrial applications. For proper choice of a valve for fluids other than hydraulic oil or for ...
DN: 6.35 mm - 38.1 mm
Pressure: 42, 50 MPa
DN: 0.125 in - 0.75 in
Pressure: 15 bar
Temperature: -15 °C - 220 °C
Ball valve for all hydraulic and pneumatic. Ideal for water, oil, compressed air. Operating Temperature: -15 ° to 220 ° C / 0 ° 150 ° C in the absence of steam -15 ° 60 ° C for gas Threaded port ISO228 ...
MASTERTUBI spa
Hydraulic valves and fittings Draka stocks Grinnell valves, couplings, elbows, tees and caps.
Please specify:
Help us improve:
remaining