Diameter: 0.5 in
Operating pressure: 16 bar
... DATA Material Body and thrust ring: nickel plated brass Thread Metric, taper and parallel Seal NBR rubber Clamp Stainless steel AISI 316 Size M5 ÷ G 1/2 Fluid Air, water, oil, steam Working temperature - 20 ...
Waircom
Diameter: 5.5 mm - 45 mm
Type RNC-316 IECEx-ATEX approved stainless steel adapter fitting, male one side, female other side, was originally developed to connect to threaded rigid conduit but can also be used with a flexible metal ...
Anamet Europe
Diameter: 5.5 mm - 45 mm
Type BNC-316 IECEx-ATEX approved stainless steel barrier adapter fitting, male one side, female other side, is used with a flexible metal conduit to provide mechanical protection of to ...
Anamet Europe
Diameter: 5.5 mm - 62 mm
Type RAC-316 IECEx-ATEX approved stainless steel adapter fitting, male one side, female other side, was originally developed to connect to threaded rigid conduit but can also be used with a flexible metal ...
Anamet Europe
Diameter: 1.2 mm - 4.1 mm
Straight push-in fitting M-Push 110 brass design nickel-plated with male thread and external hexagon Type: gerade Steckverschraubung Operating pressure: -0,75 – 10 bar Temperature range: 0 °C to +60 °C Material ...
Diameter: 0.25 in
Quick coupler, female, including aluminium dust cap • Connection: ¼" BSP female • Fits: A 239
Holmatro Industrial equipment
Diameter: 0.75 in
Operating pressure: 5.17 bar
Brass Stamped Female Hose Nut to Machine Hose Barb Swivels Description: Ideal for use with any standard 3/4 in. (20mm) garden hose. Swivel allows hose to spin freely of the threaded connection to prevent accidental disconnection and ...
Watts Water Technologies
Diameter: 4 mm - 12 mm
Operating pressure: 0 bar - 15 bar
HA Technopolymer Push-In Fittings CHARACTERISTICS Temperature-20 80 °C (based on the type of tube) Fluidcompressed air, vacuum Max pressure15 bar Working pressure-0,99 -5-10 bar Bodytechnopolymer Fixing elementsnickel-plated ...
UNIVER Group
Diameter: 4 mm - 25 mm
... production of fittings. They are manufactured in three types of materials: 316 grade stainless steel, carbon steel and brass. In installations with plastic tubing, the rings will be made of nylon for brass fittings ...
Quick couplings made of brass, steel and stainless steel Mono- and Multicouplings Flat-Face-Couplings Safety couplings Temperature control couplings Hydraulics, pneumatics, water, gas
Diameter: 27 mm - 562 mm
Operating pressure: 10 bar
elbows - short radius - Ext. from DIN 86090 in copper nickel - 45° - 10 bar - STANDARD : Extrapolated from DIN 86090
Operating pressure: 350, 700 bar
Connect 2 Quick-test XT 10,000 psi hoses together quickly and easily • Quick-test XT connection makes connecting two high pressure hoses together quick and easy • Note that these are not compatible with QT or QS hoses. Please ...
Ralston
Operating pressure: 350 bar
... other side • Bulkhead seals so no liquid or moisture can get into a control panel or enclosure • Use to connect fittings on the inside of an enclosure to a Quick-test hose on the outside of the enclosure ...
Ralston
Operating pressure: 350 bar
Connect three hoses or a combination of 3 hoses, adapters and hand pumps or manifolds • Durable forged construction • Tee has full flow through each of the ports • Made in USA
Ralston
Diameter: 15 mm
Operating pressure: 20 bar
... Brass, »sharkbite«, G 1/2, for pipe exterior Material Brass CW602N O-Ring Nitrile Cartridge ring Stainless steel 304 Grab ring Stainless steel 316 Alignment ring Acetal Disconnecting ring Acetal
RIEGLER & Co.KG
Diameter: 58.7 mm
Operating pressure: 20 bar
Irrigation connector F inlet and F outlet, DIN 2999 threaded Cod. G64.01 Irrigation elbow for hydrant connection
Diameter: 6 mm - 38 mm
The CAST S.p.A. fitting according to the norms ISO 8434-2/ SAE J514, is a mechanical fitting traditionally used for high pressure oleo-dynamic systems. The sealing is made by the contact between two metal ...
Diameter: 6 mm - 38 mm
The CAST S.p.A. fitting according to the norms ISO 8434-3 / SAE J1453, is a mechanical fitting traditionally used for high pressure oleo-dynamic systems. The sealing is made by the contact between two ...
Diameter: 0.25 in - 4 in
Langley Alloys are able to provide a wide range of olet fittings. Olets come in many different specific forms, allowing end users to create branching fittings along the main run of piping. They are sized ...
Diameter: 0.25 in - 4 in
The sourcing of fittings can be a challenging and time-consuming process given the immense number of different configurations. Fortunately, Langley Alloys is well-placed to source and manufacture fittings ...
Diameter: 0.5 in - 100 in
Brass fitting fire thread from 100 to 3 1/2″ and to 4″
Diameter: 0.13, 0.25 in
These compression fittings are for use with numerous applications. There are brass compression fittings with a parallel thread and brass compression fittings with a tapered thread. Numerous ...
Diameter: 21.3 mm - 88.9 mm
Operating pressure: 4 bar - 16 bar
Model: - Compression pipe coupling - Material body: - malleable iron galvanised Connection: - Conical clamping ring - Material seal: - NBR Temperature: - +80 °C - Bending angle: - 3 degrees Pressure: - 16 bars (water) - Use: - New ...
Diameter: 63 mm - 315 mm
This special version of our pressure class-compatible tees enables a measuring device to be connected directly via an integrated pipe thread. Its compact dimensions mean the threaded connection is situated close to the pipeline. This ...
Diameter: 18 mm - 114.3 mm
... alloy fittings for butt welding parts such as elbows, backhaul, covers, tees, reducing pipes, lap joints, and other types. We are a reliable distributor, manufacturer, stockist, supplier, and trader of Titanium tees. The ...
Diameter: 15 mm
... interviews in various countries. With the innovative Acoustic Leak Alarm, detect leaks quickly and easily, as any non-pressed fitting will produce a loud whistling sound. Used by installers and above-ground specifiers ...
Wavin
Diameter: 80 mm - 1,200 mm
Kolk flanged fittings are made of ductile iron GJS-400/500 (DIN1693 GGG-40/50). Designed acc. to EN 545, flange drilling acc. to EN 1092-2 (ISO 7005-2). Epoxy coated (Resicoat®) acc. to EN 14901 (DIN 30677-2) and GSK ...
Diameter: 15 mm
... parts are made from brass With the use of plastic pipes, support sleeves are also required for the clamping ring screw fittings Technical details GTIN/EAN - 4011666503220 Article number - DGKE815035 Designation ...
Schneider Druckluft GmbH
Diameter: 4 mm - 22 mm
Operating pressure: 190 bar
Long description - Braze banjo Metric SBM - Technical information - Acc. DIN 7622.
Kramp
Please specify:
Help us improve:
remaining