Diameter: 3, 4 in
Operating pressure: 8 bar - 230 bar
VAPOR RECOVERY ADAPTOR WITH IN LINE DEFLAGRATION FLAME ARRESTER It's a Protection System with ribbon coil: deflagration in-line flame arrester in according with Directive 20H/34/EU and harmonized standard EN ISO 16852:2016 - Used for ...
Diameter: 4 mm - 12 mm
Operating pressure: 0 bar - 10 bar
Diameter: 15 mm - 25 mm
Fitting, socket fitting for gas supply with internal thread Fitting (coupling) Stahlmann guarantees the leak-free installation of Stahlmann corrugated pipe solutions made of stainless ...
Diameter: 3 mm - 15 mm
The hose tubing connector is characterized by its cylindrical straight structure. It fits various hose sizes and has two versions. The Polypropylene type resists working temperatures of up to +135°C while the Polyvinylidene fluoride type ...
Diameter: 4 mm - 17 mm
The Burkle universal hose tubing connectors for diameters from 4 to 17 mm feature conical nozzles and can be made out of PP or PVDF. The PP type has heat resistance up to 135 °C, while the PVDF type has heat resistance up to 160 °C and ...
Diameter: 3 mm - 15 mm
Cylindrical T hose connector to connect hoses. - PP, Temperature resistant up to +135°C max. - PVDF, Temperature resistant up to +160°C max., highly resistant to chemicals - Sterilisable
Diameter: 20 mm - 180 mm
Operating pressure: 16, 10, 5 bar
... quality of the raw materials used, Unidelta fittings are resistant to a large number chemical substances (see chapter on Chemical Resistance) and UV radiation. The main applications of electrofusion fittings ...
Unidelta S.p.A.
Diameter: 3 mm - 14 mm
Operating pressure: 0.5 bar - 12 bar
Series of push-in fittings with reduced dimensions and new collet and release collar. They are for connecting nylon and polyurethane tubes. Available in various configurations (studs, elbows, T, Y) and with threads Gas ...
Diameter: 2.5 mm - 15 mm
Operating pressure: 0.5 bar - 12 bar
Series of rapid fittings for connecting nylon and polyurethane tubes. They should be used in all those applications where a safer tube-fitting connection is required. Available in various configurations ...
Diameter: 0.125 in - 1 in
Operating pressure: 0.5 bar - 12 bar
Series of standard fittings available in various configurations to adapt the connections of every installation according to one’s requirements. With threads Gas taper (BSPT) and Gas parallel (BSP).
Operating pressure: 1,200 bar
Standards adaptors are also available individually. If among our standards adaptors or high pressure adaptors you don't find what you are looking for, our Design Office remains at your disposal to design and manufacture the adaptor ...
AREMECA
Operating pressure: 100 psi
Barbed fittings with Orifice Insert Barbed fittings with Orifice Insert These barbed fittings feature an integral precision orifice. Specifications ACCURACY: See “Precision Orifices” MATERIAL: ...
Completely raparaible and disassemblable - Pressurized and depressurized connectable - Suitable for fluids and gases - Functional parts - high strength stainless steel - Mounting into individual contour - Flow optimized (real diameter) - ...
Diameter: 9 mm - 27 mm
90° brass elbow with metallic continuity IP67 Connection type screw connection to housing Thread Construction type External thread Degree of protection (IP) conduit dependant 67.00 Material housing Brass Model 90°-Bend Surface ...
Diameter: 4, 6 mm
Operating pressure: 10 bar
... Corrosion-resistant - High level of gas tightness - Material of sample-contacting parts: PVDF Hose and tube screw connectors as well as fittings of series 1 to 3 out of plastic are indispensable and well-proven accessories ...
M&C TechGroup Germany GmbH
Diameter: 6 mm
... with barbed fitting for flexible tube -Barbed fitting: DN 6 -Corrosion-resistant -High level of gas tightness -Material of sample-contacting parts: PP hose nozzles, G-ISO thread, material: PP Hose ...
M&C TechGroup Germany GmbH
Diameter: 8 mm
... barbed fitting for flexible tube Thread size: G 1/8" Barbed fitting Corrosion-resistant High level of gas tightness Material of sample-contacting parts: PP hose nozzles, G-ISO thread, material: PP Hose ...
M&C TechGroup Germany GmbH
Diameter: 10 mm - 100 mm
... large range of these Fixings & Fittings for Adjustable Feet in stock ready for free or next day delivery, along with free samples which can be sent out if you'd like to test suitability before placing an order. These ...
Exd II C Reducers are used to provide a means of attachment between apparatus, pipes and mouthpieces of dissimilar thread forms. Threads: - BSP TAPER BS 21 - NPT (ANSI B1.20.1) Materials: - Mild steel zinc plated - ...
KROMA MEC SRL
Exd Nipples allow connections between female mouthpieces. Threads: - BSP TAPER BS 21 - NPT (ANSI B1.20.1) Materials: - Mild steel zinc plated - Stainless steel
KROMA MEC SRL
Exd II B LBH Pull Boxes are used in conduit plants. The back opening offers simple plant in-spection and easy pulling of cables. Threads: - BSP TAPER BS 21 - NPT (ANSI B1.20.1) Materials: - Aluminium
KROMA MEC SRL
Diameter: 3 mm - 14 mm
Operating pressure: 20 bar
The MA is our “Automatic push-in fitting” line. It enables quick connections with calibrated plastic hoses at any time, at any stage of the pneumatic circuit and by a simple hand movement. The connection ...
C.Matic S.p.A.
Diameter: 6 mm - 18 mm
Operating pressure: 0 bar - 16 bar
The MT is the new push-in fittings line that has been developed and designed to ensure high reliability and safety in the pneumatic braking systems on commercial and industrial vehicles. The push-in fittings ...
C.Matic S.p.A.
Diameter: 0.156 in - 0.75 in
Operating pressure: 290 psi
... Recommended tubings: PA Tubings complying with SAE (DOT). Application fields: Application Fields: Pneumatic circuits for truck and Trailers : Air Suspension, Braking Systems, Transmissions, locking ...
C.Matic S.p.A.
Diameter: 4 mm - 6 mm
Operating pressure: 250 bar
... grease lubrication systems as an alternative to the regular fittings (nut+olive). The tube may be connected and disconnected repeatedly, and it will not affect the tube's performance. The fitting and ...
Diameter: 15 mm
... parts are made from brass With the use of plastic pipes, support sleeves are also required for the clamping ring screw fittings Technical details GTIN/EAN - 4011666503220 Article number - DGKE815035 Designation ...
Schneider Druckluft GmbH
Diameter: 10 mm - 80 mm
... any air operated pinch valve series of VMC, VMP and VF with internal thread ends. They are mounted on a flexible tube that is placed over the hose spigot from the outside with a hose clamp. With this type of installation ...
Push type, plated fittings permit lubricant to flow. Built-in ball, under spring pressure, prevents dirt from entering. Handy kit for shop toolroom or toolbox. On hand when needed saves time and money. Plastic compartment ...
Diameter: 1.2 mm - 4.1 mm
Straight push-in fitting M-Push 110 brass design nickel-plated with male thread and external hexagon Type: gerade Steckverschraubung Operating pressure: -0,75 – 10 bar Temperature range: 0 °C to +60 °C Material ...
Diameter: 6 mm - 31 mm
Operating pressure: 160, 420, 400, 315, 300 bar
Application area Automotive engineering Connection 1 metric cylindrical outer thread Sealing form 1 24° inner cone Residual pressure Coupling under residual pressure is possible Material ...
Diameter: 0.25 in - 1 in
Operating pressure: 17.23 bar
... prevent an electric current from occurring. Series 3008 is ideal in applications such as hot water storage tanks, water and air conditioners, processing tanks, steam, gas, and water piping. Maximum Pressure: 250psi.
Watts Water Technologies
Diameter: 7 mm - 19 mm
Operating pressure: 10 bar
... coupling • - N BR gasket (only for Ref. 2280-2283 ) • - NFE 29573 standard • - Between claws 41 mm USE : • - Water and compressed air • - Min and max Température Ts : - 5°C to + 60°C (+100°C with Neoprene gasket) • ...
SFERACO
Diameter: 4 mm - 12 mm
Operating pressure: 15 bar
Please note the permissible working pressure of the hose used . For Compatible hoses see chapter : Hose - HOS . Other O-Ring materials upon request : B = NBR , FDA - Compliant ; E = EPDM , FDA - Compliant ; Z = FFKM ( Kalrez )
Schwer Fittings
Diameter: 4 mm - 12 mm
Operating pressure: 15 bar
Material: 1.4404, AISI 316L, O-Ring: Viton, Maximum working pressure dependant on that of the hose used.
Schwer Fittings
Diameter: 4 mm - 12 mm
Operating pressure: 15 bar
Material: 1.4404, AISI 316L, O-Ring: Viton, Maximum working pressure dependant on that of the hose used.
Schwer Fittings
Please specify:
Help us improve:
remaining