IP68 Explosion Proof Camera Housing Ex d IIC T6 Gb explosion-proof marking IP68, NEMA-6P enclosure rating AISI 304/316L stainless steel construction (available) Input power: 12 V DC/24 V AC/220 V ...
LonTrend Corporation
Width: 85, 115, 175, 275 mm
Height: 45, 65, 85 mm
Depth: 105, 165, 225 mm
A small equipment/extruded case, as either a one-piece or two-part with a removable top cover. Features For mounting of standardized single or double euroboards in multiple levels (width > 105 mm and depth > 105 ...
Width: 80, 120 mm
Height: 55, 75 mm
... need to be grey! With our Multi-Colour-Enclosures made of ABS, we offer the possibility of designing the colour of your products and visually upgrading them even for small quantities. Multi-Colour-Enclosures ...
MULTI-BOX
Dust proof housing without sun-shield or safety thermostat for 230 VAC cameras and for low voltage powered cameras in combination with additional inbuild mains unit, aluminium case, cable access via 3 x PG-9 cable ...
GEUTEBRÜCK
Width: 100 mm
Height: 25 mm
Depth: 200 mm
High-quality, resistant material: Aluminium. New and original design. Different colour and size possibilities. Customization service on request for the bulk orders.
Bahar Enclosure
Width: 150 mm
Height: 107 mm
Depth: 49 mm
Features • Red Aluminum Housings • Easy Assembly and Disassembly • Enclosures are Stackable with EC1UA Adapters The EC1U enclosure design has been optimized for simple assembly, ...
... The enclosure has a certified temperature range of -40 to +70 °C (-40 to 158 °F) without additional cooling. Ingress protection to IP66 and IP68 means that it can be exposed to dust, water immersion and high-pressure ...
... The enclosure has a certified temperature range of -40 to +70 °C (-40 to 158 °F) without additional cooling. Ingress protection to IP66 and IP68 means that it can be exposed to dust, water immersion and high-pressure ...
Switch Housing TG2 Ledge handle with buttons and emergency stop for rear attachment with a continuous groove for a variable bolting distance. Material and surface: Housing made of aluminium profile ...
Handle Series TG3 Ideal for retrofitting of switching functions. High holding forces due to the clamping version. Material and surface: Clamping ring made of aluminium AlMgSi 0,5; blasted black or natural anodized. Note: Other ...
... We offer a variety of options, as well as cable and wiring to suit your needs. •Proximity Sensor Housings •Velocity/Acceleration Sensor Housings •Transducer Cables & Instrumentation Wiring
Width: 400 mm
Height: 500 mm
Depth: 210 mm
Suitable for brakes up to size 035, configuration according to customers demand. Pneumatic components include: Compressor with 5 liter pressure storage for an output range of 0,5 to 6,0 bar Filter regulator unit, including ...
Width: 205, 530 mm
Height: 235 mm
Depth: 400 mm
The Sonic Digital MG Housing is the optimum solution for the space-saving arrangement of generators of the Sonic Digital series. This housing is available in two sizes. WEBER-ULTRASONICS.COMSONIC DIGITAL ...
Width: 50 mm
Height: 100 mm
Depth: 17 mm
... Number of pins - 5 Enclosure rating - IP 67 Housing material - PA TPU UL 94HB Temperature range - -20...+60°C Number of pins - Terminal block Wire cross-section - 8 x 0.34 mm2 + 3x 0.75 mm2 Product ...
Width: 43.5 cm
Height: 107 cm
Depth: 59 cm
Width: 5 mm - 20 mm
Height: 10 mm - 50 mm
The housings are hardened and ground on all sides. The guide bore is honed to -2 / -4µ prepared for matching. The roundness and cylindricity is within ISO h1 and guarantees for each individually matched PHZ high-precision ...
TG Feeler Set in wooden box. Thread Gauge Feelers equipped with two ruby balls Grade 6 in orientation 90 ° or parallel. The maximum dimensional deviation of the balls is ± 1 micron.
Width: 1,200 mm
Height: 800 mm
Depth: 800 mm
Polyethylene container with lid available on request
... to ASME code. It has the characteristics of high machining accuracy, flexible quick opening and closing, safety interlock, compact structure, etc. It is used in petroleum, chemicals, natural gas and other industries. ...
... noises in the cleaning fluid. In our noise protection boxes, the noise level is significantly reduced. The noise protection boxes are available in 2 sizes for different ultrasound devices.
... while in operation. The 950MD housing is also perfect for retrofitting existing cylinders with an LDT providing a continuous position feedback signal. Featuring • Cylinder Position Sensor • Stainless Steel protective ...
Sound-proofed boxes complete with supports and anti-vibration joints for the fan
Isolated box for water borne coating application Customizable: airspray or Airmix® - manual or automatic application Compact Simple to install and run 100% safe operation PERFORMANCE ♦Quick response ...
Width: 610 mm
Height: 293 mm
Depth: 483 mm
The DUT enclosure in this product series is designed with a safety interlock, which contributes towards the elimination of potential for electric shock when used incorrectly. The interlock also disables high voltage if ...
Width: 56 mm
This In-line housing for load cell amplifiers (ICA) and digital load cell converters (DCell). The ILE comes as a stainless steel in-line enclosure and enables users to quickly convert any standard load ...
... IK10-rated Arctic Temperature Control One cable installation Features to protect what you value AXIS T92E Housing Series has IP66 and NEMA 4X protection rating against the ingress of dust, windblown dust, ...
1.Application AMBC-M busbar chamber system is designed to provide either compact, wall-mount-ing installations or by using optional pedestal sets easily assembled switchboards.Every facility is provided to enable it ...
Width: 1,300, 435, 535, 690, 1,050 mm
Height: 650, 1,010, 840, 990 mm
Depth: 700, 385, 435, 575 mm
Please specify:
Help us improve:
remaining