SAMSON oil valves

DN: 15 mm - 50 mm
Pressure: 25 bar
Temperature: -15 °C - 200 °C

Special features • - Consisting of single-seated globe valve and actuator • - Flanges or male thread connection and welding or threaded ends or female thread connection Accessories • - Type 2 NI Strainer Options ...

Pressure: 400 bar
Temperature: -20 °C - 90 °C
Flow rate: 250, 180, 400 l/min

The KLSV is a series of flow-sharing, load-sensing main control valves for multifunction construction machinery. Their low hysteresis and excellent pressure drop characteristics provide superior performance and efficiency. > ...

DN: 0.25 in
Pressure: 630 bar
Temperature: -20 °C - 200 °C

DN: 0.5 in - 1 in
Pressure: 138 bar

... Drain Ball Valve has a spring return handle, and available in either stainless or carbon steel. The spring return “deadman” handle 76-500 and 89-500 series valves are handles that have a water, oil ...

DN: 32, 40, 50 mm
Pressure: 16 bar
Temperature: -10 °C - 180 °C

... durability in steam and aggressive applications • Valves meeting Pressure Equipment Directive 97/23/EC • Mountable in any position • Tight shut-off and Long Service Life • Parker Angle Seat Valves ...

DN: 15 mm - 250 mm
Pressure: 23.8 bar - 40 bar
Temperature: -10 °C - 400 °C

... control, flanged connections according to EN1092-1 PN 40 with prominence. Streamlined flow valves, Streamlined flow valves bellows type, Streamlined flow valves bellows type on carbon ...

DN: 3.35, 4 in
Pressure: 0 bar - 517.1 bar
Temperature: 0 °F - 250 °F

Rotary Systems’ timing valve is designed for applications that require automatic clamping and unclamping. This timing valve eliminates the need for a control valve or solenoid valve. ...

Pressure: 250 bar
Flow rate: 80 l/min

EDF*M COMPENSATED PROPORTIONAL FLOW CONTROL VALVES Description EDF03M and EDF05M are direct operated normally closed proportional flow control valves with pressure compensation. These valves ...

DN: 51, 25 mm

... closes valve for for fuel gas Operation is automatic or semi-automatic Pneumatic control pressure can be air, gas or oil Models for 2 in. or 1 in. (51 mm or 25 mm) fuel ...

DN: 0.25 in - 1.25 in
Pressure: 0 bar - 350 bar
Temperature: -20 °C - 100 °C

Two or three ways flow regulators, with or without compensated function, unidirectional or bidirectional. Compact design and excelent flow regulation. Flow rate from 1 to 100 l/min. Max working pressure 350 bar. Cartridge style.

DN: 0.375 in

NEEDLE VALVE A 109 N Needle valve A 109 N • For accurate control of the oil flow, also under maximum pressure • Connection: 3/8" NPT female (2x)

DN: 15 mm - 40 mm
Temperature: 225 °C

KTM full bore Class 600, 900 & 1500 fire-safe and anti-static, high pressure ball valve for the chemical and petroleum industries Ideally suited for use in the oil and gas production, ...

Pressure: 4,500, 2,500, 3,000 psi
Flow rate: 40 us gal/min

The CROSS SSD4 series selector valves are 6 way, 2-position units with cast-in metering notches for smooth operation. They provide an economical way of diverting flow to two separate hydraulic circuits. Features: SSD4: ...

DN: 3 in - 5 in

... Open/Stop Lever Valves is designed to be latched open with engine oil pressure. The valve is opened using the manual start/stop lever. Once the engine has been started and running, the ...

... in the oil and gas industry, i.e offshore on an oil platform. The valve is designed to maintain optimal tightness and function even in the event of a fire. This prevents flamable ...

DN: 0.125, 0.25, 0.18 in
Pressure: 10, 160, 300 bar
Temperature: -20 °C - 80 °C

The PVB Divider Valve is designed for small-size series progressive lubrication systems. It is a cost efficient solution for supplying multiple lubrication points with relatively small volumes of oil and ...

DN: 0.375 in
Flow rate: 7 us gal/min

... Controls surges by restricting flow if it exceeds 7 gpm. When flow subsides, valve reopens automatically. Has 3/8" NPTF male end to thread into return port of system control valve, and a 3/8" NPTF female ...

Ball valves are long lasting and can work perfectly even you are operating it for years most especially the metal-seated ball valves which can meet the highest requirement. It is recommended for shut-off ...

DN: 15 mm - 200 mm
Pressure: 10 bar - 40 bar
Temperature: -50 °C - 400 °C

– shut-off globe valve C09 and shut-off globe valve with control cone C09.4 – rotating rising stem – standard bonnet construction – design of the body is straight – sealing surface is welded by hard ...

DN: 0.5 in - 8 in

... 15848 / TA-LUFT ATEX INDUSTRIES Oil & Gas Chemical & Petrochemical Pulp & Paper Energy & Renewable Food & Pharma Marine Tank terminals Mining Waste treatment Special fluids transport Oil ...

DN: 0.25, 0.375, 0.563 in
Pressure: 30,000, 10,000, 20,000 psi

... Equipment Company has developed a complete line of valves and affiliated components specifically for the unique requirements of the oil and gas industry. We offer valves, fittings and ...

DN: 0.375 in
Pressure: 46 bar
Temperature: -40 °C - 120 °C

• Differential valves are mounted on refrigerating and air conditioning installation oil receivers. • They maintain permanent oil receiver overpressure versus the compressor sumps in ...

DN: 0.25, 0.375, 0.5, 0.75, 1 in
Pressure: 0 bar - 400 bar
Temperature: 0 °C - 240 °C

Indumart Needle Valves are high pressure isolation valves suitable for shutting-off the impulse line and for mounting to pressure instruments. They are mostly used in oil, gas, Chemical, ...

DN: 0.25 in
Pressure: 50, 110 psi
Temperature: 0 °F - 170 °F

Material: Acetal Copolymer Colors: Orange, Black, Grey Compatibility: Yes: Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium Hydroxide No: Chlorine, Acids, Ammonium ...

DN: 15 mm - 800 mm
Pressure: 20 bar - 420 bar
Temperature: -50 °C - 200 °C

Side Entry Valves suitable for Oil & Gas production, processing, transportation, distribution, chemical and petrochemical refining including system isolation, pressure level and flow ...