Pressure: 303 bar
Temperature: 121 °C
... sampling components from high temperature liquids. It is an economical and reliable mechanical replacement for a solenoid shutoff valve and temperature controller, requiring no external source of electricity, air or hydraulics. The ...
DN: 15 mm - 100 mm
Pressure: 10 bar
• For regulating viscous fluids or with solid particles • Diaphragm in EPDM or FPM, PTEF resistant to all acids • PVC, PP or PVDF materials • PN10 • Handwheel or with pneumatic actuator NA, DA, NC • Electromechanical ...
DIVATEC,SL
DN: 15 mm - 32 mm
Pressure: 6 bar
• For regulating viscous fluids or with solid particles • Diaphragm in EPDM or FPM, PTEF resistant to all acids • PVC, PP or PVDF materials • PN6 • Handwheel or with pneumatic actuator NA, DA, NC • Electromechanical ...
DIVATEC,SL
DN: 12 mm - 15 mm
Pressure: 6 bar
• For regulating viscous fluids or with solid particles • Diaphragm in EPDM or FPM, PTEF resistant to all acids • PVC, PP or PVDF materials • PN6 • Handwheel or with pneumatic actuator NA, DA, NC • Electromechanical ...
DIVATEC,SL
DN: 15 mm - 50 mm
Pressure: -8.7 psi
Temperature: -76 °F - 437 °F
Vent valve for pipelines, pipeline systems, vessels and heat exchangers, in which the pressure should not fall below atmospheric pressure. emptying of tanks
Goetze KG Armaturen
DN: 0.125, 0.25 in
Pressure: 0 bar - 8 bar
Temperature: 0 °C - 70 °C
... pressure adjustment will be thereby kept steatfy for a long time. h can also be used as an economuer when connected between the valve and the cylinder to operate. Pressure is being saved and rod speed decreased in the ...
DN: 0.125 in - 0.5 in
Pressure: 0 bar - 10 bar
Temperature: 0 °C - 70 °C
The valve is used to section a pneumatic installation. Sliding the sleeve on the rod. both ON and OFF positions can be achieved. When the sleeve is against the rod hexagon. the flcw goes in the arrcw direction (ON), pushing ...
The Pressure Reducing Valve is made of solid BSP brass and stands at 1-1/4 inch. This unit is ideal for fitting in a water inlet.
DN: 15 mm
Pressure: 5 bar - 100 bar
Temperature: 0 °C - 60 °C
characteristics ports HPP-1 with valve body G 1/2 - G 3/4, HPP-2 with valve body G 1/2 - G 3/4 media gaseous - liquid - highly viscous -, contaminated operating time ms < 200 media temperature ...
Pressure: 0 bar - 350 bar
Flow rate: 0 l/min - 2 l/min
— The CRE valve is a direct operated pressure control valve with electric proportional control with cartridge execution which can be used in blocks and panels with type D-10A seat. — The valve ...
Duplomatic Oleodinamica
DN: 65 mm - 300 mm
Pressure: 40, 35 bar
Temperature: 180 °C
QUICK-CLOSING VALVE TYPE KVH The KVH-Type is part of the KÜHME High-Performance Class. KVH-Valves are especially designed for immediate and premium tight shut-off of any type of liquid fuel flow. This ...
Kühme Armaturen GmbH
DN: 15 mm - 50 mm
Pressure: 40 bar
Temperature: 180 °C
... The quick-closing valves combine the core competencies of KÜHME in valve technology with those of a system supplier for plant installations tailored to the demand. The first valve can ...
Kühme Armaturen GmbH
DN: 65 mm - 300 mm
Pressure: 16 bar
Temperature: 180 °C
... The quick-closing valves combine the core competencies of KÜHME in valve technology with those of a system supplier for plant installations tailored to the demand. The first valve can ...
Kühme Armaturen GmbH
DN: 20 mm - 200 mm
Pressure: 0 mbar - 500 mbar
Temperature: -20 °C - 450 °C
VF VFT VFH Butterfly valves for air and gas VF, VFT and VFH butterfly valves are designed for regulation and control of air and gas flow. Valves can be operated manually using ...
Pressure: 6,000 psi
... 'PSB' rated upto 6,000psi (414bar) The 3-way L-Port diverter valves are an economical and safe method of diverting high pressure lines, saving the use of several high pressure 2-way valves. Ensuring ...
Alco
The modulating control valves of the newly conceived MDV-D1 series are built according to the EN 161 norms to be used on industrial combustion systems. They are particularly suitable for the proportional regulation of ...
ECONEX S.R.L.
DN: 125 mm - 400 mm
Pressure: 10 bar - 40 bar
Temperature: 130 °C
double-seat, straight-way valve for feeding or draining, large flow rates and nominal diameters | body made of GGG-40, GS-C25, CrNiMo-steel | incl. float rod and shell-type float made of CrNiMo-steel | rubber coating ...
MANKENBERG GmbH
DN: 50 mm - 400 mm
Pressure: 16 bar - 40 bar
Temperature: 280 °C
balanced straight-way valve for medium and very high flow rates | useable for liquids, gases and steam | body made of GGG-40 or GS-C 25 | high precision thanks to integral control behaviour | response time can be adjusted by damping
MANKENBERG GmbH
DN: 15 mm - 150 mm
Pressure: 16 bar - 40 bar
Temperature: 250 °C
single-seat straight-way valve for high flow rates with balanced cone | highest temperatures up to 350 °C | usable for steam | body made of GS-C25 or CrNiMo-steel | steel / stainless steel, stainless-steel-diaphragm body, ...
MANKENBERG GmbH
Pressure: 12 bar - 50 bar
Temperature: 0 °C - 80 °C
This metering valve is developed by I.L.C. srl. It is being offered with manual, pneumatic as well as electrical actuations. In addition, the metering valve is meters out the lubricant which was installed ...
I.L.C. srl
DN: 6, 4, 8 mm
Pressure: 0 bar - 20 bar
Temperature: 0 °C - 140 °C
... Römer flow and stop valve program consists of throttle, shut-off and check valves. The function fittings offer fine adjustment possibilities for the precise regulation of fluid flows. Throttle valves ...
DN: 0.5 mm - 5 mm
Pressure: 8, 6 bar
Temperature: 0 °C - 80 °C
In the EFC Dispensing valves, the position of the precision throttle directly connected to a stepper motor determines the flow rate. This drive technology allows the set position to be held even without power. Variants ...
DN: 25 mm - 150 mm
Pressure: 10 bar
Temperature: -10 °C - 25 °C
... Versatility it can be installed for all applications and different products DESCRIPTION BBZPA is a divert single seat valve developed to improve efficiency during maintenance operations. Its EASY MAINTENANCE design ...
BARDIANI VALVOLE S.p.a.
DN: 0.75, 0.5 in
Pressure: 6,000 psi
Temperature: 200 °F
... All stem threads are rolled for strength and ease of operation One-piece bonnet with a metal-to-metal seal to the valve body below the bonnet threads Slotted spring pin to prevent accidental loosening ...
NOSHOK
DN: 0.25, 0.125 in
Pressure: 1 bar - 10 bar
Temperature: -10 °C - 70 °C
The SLT circuit switch allows to convey two pneumatic signals into one way, keeping the two pneumatic sources separated. They have aluminium body, NBR seals and brass components and are available with 1/8” and 1/4" ports. CONSTRUCTIVE ...
DN: 10 mm - 600 mm
... PLANTS, as a shut-off valve and/or control valve for limewash, suspensions, etc. PLANT ENGINEERING/POWDER COATING PLANTS, for isolating and dosing powders, paints, etc. CONSTRUCTION INDUSTRY/CEMENT ...
AKO ARMATUREN
DN: 10 mm - 250 mm
Pressure: 2 bar - 6 bar
... operated Pinch Valves. What are the benefits of air operated pinch valves? Free flow of product, minimum frictional resistance, 100% leak free, no blockages and low net weight are among the most important ...
AKO ARMATUREN
DN: 25 mm - 450 mm
Pressure: 3, 4, 2 bar
... operated pinch valves of the RVA series can be made with a flange connection complying with ANSI B 16.5- 150lbs, if required. Structure of RVA series The RVA series air operated pinch valves consist ...
AKO ARMATUREN
DN: 0.375 in - 4 in
... operation. Diverter and various multiport configurations are available upon request. Reference standards 48 and R48 series valves are designed and tested according to ASME BPE standard. EC 1935 compliance – as an option.
HABONIM
DN: 0.5 in - 6 in
... drainability are essential for product quality. Patented HermetiX™ stem seal, made from FDA-approved polymer materials. The valve port diameter is identical to the tube inner diameter so that no expansion or contraction ...
HABONIM
DN: 0.5 in - 2 in
... operation. Diverter and various multiport configurations are available upon request. Reference standards 48 and R48 series valves are designed and tested according to ASME BPE standard. EC 1935 compliance – as an option.
HABONIM
Pressure: 30 psi - 150 psi
Walchem’s Multi-Function Valves (MFV) provide anti-syphon, back pressure, bleed, drain and pressure relief for your 11, 16 and 21 size E class metering pumps. These valves will prevent syphoning when ...
DN: 3 mm - 24 mm
M&J Valve's high quality 4-way diverter valve system is specifically designed for the rigid requirements of bi-directional meter proving. The M&J 4-Way Diverter Valve is the heart of ...
DN: 0.15 in - 1 in
Pressure: 10 bar
Temperature: 93 °C
Combines three valves in one: Isolation Valve, Check Valve and Companion Flange Free floating flange allows easy alignment and installation of pumps Prevents gravity circulation Isolates ...
DN: 10 mm - 100 mm
Pressure: 25 bar
Temperature: -10 °C - 80 °C
for water distribution domestic and individual 10 BIS : With 1/4'' plugs on both sides to allow pressure gauge connection Possibility of assembly of compensating spring (except for 4'' size) to obtain settings at 0.5 bar Setting ...
SOCLA
DN: 10 mm - 100 mm
Pressure: 16, 20, 10 bar
Temperature: 80 °C
general processes, heating and multi-fluid applications compatible with brass BALL : hard chrome-plated brass SEALS : PTFE
SOCLA
DN: 15 mm - 50 mm
Pressure: 20, 25 bar
Temperature: -20 °C - 80 °C
general processes, heating and hall fluid applications compatible with brass BALL VALVE : brass Full bore BALL : hard chrome-plated brass SEALS : PTFE With drain off cock and plug
SOCLA
Temperature: -45 °C - 260 °C
KLINGER BALLOSTAR® KHI BALL VALVES Decades of reliability guaranteed KLINGER Ballostar® KHI ball valves will keep up with stricter requirements and are assured to already meet future standards with ...
Please specify:
Help us improve:
remaining