- Detection - Measurement >
- Position, Speed and Acceleration Measurements >
- Magnetic proximity sensor >
- SCHMERSAL
SCHMERSAL magnetic proximity sensors
... For pneumatic cylinders • Cable output • General features: This sensor detects the position of the magnetic ring inside a standard pneumatic cylinder with a T slot. The sensor ...
BDC ELECTRONIC S.r.l.
REED CONTACT 2 wires • Detection of magnets • Cable output • General Features: These sensors give on the output a contact activated by an external magnetic field, not depending by the polarity ...
BDC ELECTRONIC S.r.l.
... 2 and 3 wires with LED • Detection of magnets • Cable output General Features: These sensors give on the output a contact activated by an external magnetic field, not depending by the polarity ...
BDC ELECTRONIC S.r.l.
Measuring range: 1 mm
Sensors with hall elements detect magnetic targets for monitoring rotational speed or directions. Hall effect sensors from Pulsotronic detect permanent magnets as well as polarised tapes ...
Description One-piece non-contact solid-state position sensors that operate through the use of Hall Effect technology with magnetic fields generated by permanent magnets. They provide a sinking current ...
CHERRY
Measuring range: 5, 2 mm
Proximity Magnetic Sensor,Flux sensor, Cylindrical Stainless steel housing with plastic float, 1,2m cable with fastons, Reed NO output contact, Max switching voltage ...
Carlo Gavazzi Automation SpA
Measuring range: 23 mm
Proximity magnetic sensors, Cilindrical housing M12, 2m cable, Reed NO output, Max switching voltage 500 Vac, Max switching current 500mA, Max switching power 5VA, Operating temperature ...
Carlo Gavazzi Automation SpA
Measuring range: 20 mm
Process temperature: -25 °C - 70 °C
Proximity magnetic sensors, Cilindrical brass housing M12, 2m cable, Reed NO output, Max switching voltage 230 Vac, Max switching current 3A, Max switching power 60VA, Max switching distance ...
Carlo Gavazzi Automation SpA
Measuring range: 19 mm
Process temperature: -15 °C - 50 °C
The EM21 is designed to provide car position signals in the control of electric and hydraulic lifts and elevators. It is a rugged and heavy duty switch, small enough to fit within the overall depth of standard T guides. The EM21 is rated ...
Length: 60 mm
Measuring range: 12 mm
Process temperature: -60 °C - 204 °C
The FS-A Series Proximity Switch (M18 Thread) is highly versatile and can be used in a multitude of applications where a reliable signal is required. Utilising proven magnetic technology ...
Euroswitch
Length: 48 mm
Measuring range: 12 mm
Process temperature: -60 °C - 204 °C
The FS-B Series Proximity Switch (5/8" UNF Thread) is highly versatile and can be used in a multitude of applications where a reliable signal is required. Utilising proven magnetic technology ...
Euroswitch
Length: 48 mm
Measuring range: 12 mm
Process temperature: -60 °C - 204 °C
The FS-C Series Proximity Switch (M18 Thread) is highly versatile and can be used in a multitude of applications where a reliable signal is required. Utilising proven magnetic technology ...
Euroswitch
... or on an adjustable, floor mounted RTV pole. This sensor requires a User Interface for operation. The proximity sensor is compatible with the T550 and PRO Series user interfaces. Proximity ...
... Gear wheel sensing Pole wheel and magnetic tape scanning Magnetic incremental encoders Proximity switches Two-channel line drivers up to 100 kHz Features Dual ...
Ultra compact housingVarious sensitivitiesCustomized types available
Measuring range: 30 mm
... contacts. The Ex magnetic sensors are actuated by an M range permanent magnet, entering their proximity without any physical contact. These devices are available with NO, NC, changeover, ...
Measuring range: 110 mm
Process temperature: -10 °C - 50 °C
Yaskawa's Bestact™ dustproof and flood-tight proximity switches offer industry-compatible mounting capability with IP52-IP68 (~NEMA 2-6) enclosure ratings. These switches utilize Yaskawa's world-renowned ...
Measuring range: 1.5 mm - 19 mm
ELECTRONIC SENSORS celduc® relais offers two ranges of electronical sensors : -Hall effect sensors -Gear tooth sensors Both are available in plastic or stainlessteel ...
celduc relais
Measuring range: 3 in
The 2205A-L overhead door magnetic contact is designed for use in environments where a heavy-duty unit is required. the floor mount units are constructed using a rugged low-profile extruded aluminum switch housing and ...
EDWARDS SIGNALING
Measuring range: 4 mm - 7 mm
... concealed installation •Application-dependent combination of sensor and actuator(e.g. sensor concealed behind stainless steel, actuator in stainless-steel housing in process zone) The M18 safety sensor ...
ELOBAU
Employs a Hall Effect digital vane sensor and a permanent magnet in two small towers, separated by a 3.4 mm (0.135”) air gap. The output switches when a ferrous target passes between the towers. Typical targets are linear ...
CHERRY
Measuring range: 0.5 mm - 3 mm
... State (TPOS) sensor IC family, offering improved accuracy compared to prior generations. The ATS675 provides absolute zero-speed performance and TPOS information. The device incorporates a single-element Hall IC with ...
ALLEGRO MICROSYSTEMS
Length: 23 mm
Width: 14 mm
Measuring range: 18 mm - 23 mm
... provides proximity switches, liquild level sensors, speed rotate sensors, and flow meters. The principle of Magnetic proximity switches ...
Soway Tech Limited
Measuring range: 1 mm - 30 mm
Process temperature: -30 °C - 130 °C
Magnetic proximity switch is mainly composed of sensors and triggers. Sensor part is connected by the reed pipe through a lead and sealed; Trigger part ...
Foshan Chuandong Magnetic Electronic Co., Ltd.
Measuring range: 0 mm - 8 mm
Magnetic proximity switches detect selective switching marks of ferromagnetic steel. Non-magnetic materials have no influence on the function of the proximity ...
A magnetic proximity switch can be installed on the IVB, IVBL, and IVBH series pneumatic valves (NC, NO, DA) for detecting the open/close state of the valve.
Magnetic position detector REED type for cylinder grooves ISO 6431/15552 VDMA 24562 with M8 circular connector 2 contacts function indicator (LED), hexagonal fixing key
MP1005 – MP1007 Sensors Description One-piece non-contact solid-state position sensors that operate through the use of Hall Effect technology with magnetic fields generated by permanent ...
ZF switches and sensors
Process temperature: -40 °C - 85 °C
Magnetoresistive cylinder switch for T-slot, can be inserted from the top. • Measuring principle: magneto-resistive • Universal applications • Individually configurable or pre-assembled • Can be inserted into the slot from above, ...
Process temperature: -40 °C - 85 °C
Magnetoresistive proximity switch for T-slot, can be inserted from above; the quickest, easiest and safest commissioning without power supply, without fine tuning and without readjustment: Auto teach-in, ...
Measuring range: 5 mm - 9.6 mm
Process temperature: -40 °C - 105 °C
... 59022 Reed Sensor is a small cylindrical reed sensor, 25.4 mm (L) x 5.80 mm (Dia.) (1.00” x 0.228”), with a choice of normally open, normally closed or change-over contacts. It is capable of switching ...
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining