Socomec DIN rail surge arresters

Voltage: 230 V
Primary current: 0 A - 40 A

The ETITEC S C is a surge arrester designed to be used indoors. This product complies with the VDE class C and its protection suits the IEC category II. The potection happens on the subdistribution box, ...

Primary current: 10,000 A

DIN Rail Mounted Protection for Low Voltage Data Lines. The STC-DRS Series is a DIN rail mounted, single pair surge protection module ...

Voltage: 220 V - 385 V

... device inside can separate the protected parts from the power when protected parts get stricken by over frequency or extreme surge. ·Module design, convenient installation, with easy electric maintains operation. ·Built-in ...

Voltage: 230 V - 400,000 V
Primary current: 63, 20 A
Open circuit voltage: 20 kV

... / Class 3 / D Class sudden overvoltage protection surge arresters are the most sensitive surge arresters and their areas of use are quite diverse. Accordingly, these ...

Voltage: 220 V
Primary current: 1,000 A

... Instructions IEC 61643-1 2005, DIN EN 61643-11 2002, DIN EN 61643-11/A11 2007, IEC 61643-1 •Protection Rating IP20 •Shield Material Black ABS, UL'94 V0 Degree of Incombustibility •Standards for space ...

Voltage: 320, 275, 440, 385 V
Primary current: 3, 0.5 A

• Module design, convenient installation, with easy electric maintains operation • Built-in over current and over heat, temperature control open circuit technology • Adopt independent intelligence property right and high performance ...

Voltage: 500, 600, 800, 1,000 V
Primary current: 20,000 A - 80,000 A

The By7 series Surge Protection are designed to protect against lightning surge voltages in photovoltaic power supply networks. These units must be installed in parallel on the DC networks to be protected ...

Voltage: 600, 100, 1,500 V
Primary current: 20,000 A

... offers a comprehensive line of Surge Protective Devices (SPD) , components, and systems.Aswich Surge Protective Device (SPD) is a no-fuse, fail-safe surge suppressor ...

Voltage: 150, 280, 385 V
Primary current: 30,000 A - 50,000 A

... with an overhead power source or those with a lightning protection device. • Protective Elements: Nonlinear zinc oxide varistor and thermal stripper. • Structure: Quick plug-in design ...

Voltage: 240, 400 V
Primary current: 15,000, 25,000 A

Application SP9 Series surge protection device (hereinafter short as SPD), suitable for three phase distribution system with rated operating voltage AC 230/400V, 50Hz, confirm to SPD class I test classification, its ...

Voltage: 0 V - 2,000 V
Primary current: 15,000, 20,000 A

Transient surge protection device, caused by atmospheric discharges, switching maneuvers in electrical circuits and electrostatic discharge. The device incorporates protection with GAS discharger to avoid possible current ...

Voltage: 600, 1,000 V
Primary current: 20,000 A

... of DC surge protection solutions in solar PV systems. Type 2 DC SPD for solar PV application BUD-40/3 is a type 2 surge arrester for DC and photovoltaic application. Protect the solar ...

Voltage: 150 V - 1,200 V
Primary current: 20,000 A - 30,000 A

AC Power ETL recognized component certified to ANSI/UL 1449 3rd Edition products offer base with removable suppression module, local status indication and remote alarm contacts

Voltage: 230, 400 V
Primary current: 5,000 A

Leutron serie EP D ... is a surge protector for equipment, to be installed as close as possible to the equipment. EP D TN 275(/FM) is a two-pole SPD in a single block for a two-pole TN-Power Net Systems. ...

Product Item : - BHP15 Specification : - BHP-15 1P 1P+1 1P+N 3P 3P+1 3P+N DIN RAIL TYPE Applied counter Standards IEC61643 IEC61312-1,61643-1,61000-5-6 VED0675,UL14492-2,UL1283,CSA22.2

Fine surge arrester for the protection of one port of Ethernet, CAT.5 or CAT.6. To be installed directly before equipment. The product is supplied with: Universal plastic adapter for ...

Voltage: 275 V - 550 V
Primary current: 5,000 A - 100,000 A

Surge Protective Device SPD Application • Number of poles: 1, 2,3, 4; • Electric ratings: 230/400V, AC50/60Hz; • Application: Protect electric system and on-loading electrical apparatus from thunder and instantaneous ...

Voltage: 12, 120, 230, 24, 48 V
Primary current: 16 A

Compact type III arrester for AC/DC protection acc. to IEC 61643-11:2012 and EN 61643-11. Suitable for protecting end devices. Installed in the vicinity of the equipment to be protected. The arrester ...

Voltage: 120 V - 600 V
Primary current: 50,000 A

Eaton's SP1 surge protector has a compact 50KA per phase footprint, with half-inch molded nipple and optional din rail mounting kit that make this surge ...

Voltage: 150 V - 600 V
Primary current: 100,000, 200,000 A

... Vac Application from 1 to 4 poles Visual and remote contact indicator Benefits Easy installation DIN rail mounting Max nominal discharge phase 100 kA, neutral 200 kA ...