Spirax Sarco shut-off valves

FEATURES & BENEFITS Class 150 to Class 2500 Size Range ½” thru 18” (Class Dependent) Metal Seated Class V and Class VI Shutoff Uni-Directional and Bi-Directional Service Floating and Trunnion, Full and Reduced Bore Body ...

DN: 15 mm - 200 mm
Pressure: 16 bar
Temperature: -10 °C - 300 °C

Hight quality bellow sealed globe valve, with double titanium bellows.

Temperature: -40 °C - 120 °C

... installation Extended copper tails Indicator on stem shows valve position – open or closed Fully opened or closed with a quarter turn of the valve stem Positive stem stop ...

Pressure: 80 psi

... : ST100 Digital valve controller PV107-02 Valve Stand with purge cup Dispensing can extend across numerous industries and applications that require dosing in an accurate and controlled manner. ...

DN: 0.125 in
Pressure: 0 bar - 400 bar

... pressure: 400 bar Medium: Air / Nitrogen Ordering code: T1700 T1700 Mini Needle Valve Low cost Durable Low torque Soft seated Tight shut-off Metering valve Adjustable gland packing

The PP34070 is a ball valve compression device manufactured by FGS Brasil. It is offered in 3 variants, the PPR407020, PPR407025 and the PPR3407032 with the dimensions and weighs 20mm x 20mm, 160g, 25mm x 25mm, 190g and ...

Pressure: 200 bar
Temperature: -20 °C - 65 °C

Key advantages - High pressure brass cylinder valve for oxygen and oxygen mixtures (>20% O2) service - Permanent gas tight seal - Specific filling adaptor required - Residual pressure valve inline ...

Viton® O-Ring Sealed Gates Stainless Steel Construction Manual & Electropneumatic Operation

DN: 50 mm - 1,250 mm

Tender specification PVC HOKA PVC damper valve with hand lever with socket plastic fitting round with interior stop for connecting pipes in an exhaust system by welding process. as damper valve ...

DN: 3 in

The OPW 6500 series angle loading valve, made in cast aluminum, allows fluid to be held in the line out to the end of the loading arm. The aluminum body is constructed with stainless steel trim for a range of fluid handling ...

Pressure: 150,000 Pa - 1,000,000 Pa

... regulators and can auto discharge the condense water gathered in the water cup. Feature Auto draimer Manual Drain Air Shutoff Drain The water cup is provide with metal protective cover Technical Requirement Working ...

DN: 65 mm - 200 mm
Pressure: 10 bar - 160 bar
Temperature: 550 °C

Version Straight bonnet Cast steel body and bonnet Shut-off disc, Fig.No. 200 AE Throttle disc, Fig.No. 200 BE Outside screw and yoke Position indicator if required Turning and rising stem Pressure and temperature ...

... micro liter. An internal spring return makes the valves fully adaptable for use with Techcon Systems controllers. A short opening stroke provides an extremely fast and positive shut-off. The seal-less ...

DN: 25 cm - 100 cm
Pressure: 16, 40 bar
Temperature: -29 °C - 180 °C

The KTN 121LT is our 3-way, full bore, DIN flanged ball valve. The range comprises from DN 25 to DN 100, varying its floating valve design from DN 65 where the sphere is guided for better performance, ...

The Stanelle Butterfly Valves: simple, rugged components for a wide variety of application conditions. Everywhere where flexible connection is required. A rubber or a cloth collar (or the like) carries over the connection ...

... pressure. The valve will be operated by a pressure reducing differential pilot valve for closing when the flow through the main valve exceeds the safe level, regardless of pressure variations. ...

Pressure: 0 bar - 320 bar

... gauge isolator valve engineered by Ponar Wadowice. It is designed for calculating pressure in a single point, by means of one pressure indicator. In addition, it is also used to detach the pressure scale from the pressure ...

Type: Plug valves Material: steel Description: Dimensions: DN10 to DN50 Pressure range : PN315 - PN350 Field of application : Service shut-off valve located in control valve ...

DN: 50 mm - 2,000 mm

Wafer style, uni-directional knife gate valve. One piece integral cast body with guides to support the gate and seating wedges. High flow rates with low pressure drops. USE This knife gate valve is ...

DN: 0.25 in - 4 in
Pressure: 10,000 psi
Temperature: -54 °C - 538 °C

... of lightweight Monoflange isolation valves that are ideally suited to a wide range of instrumentation applications via standard flanged pressure take-off points. The compact design incorporates the Isolation valve ...

DN: 2.5 in - 16 in

... Corporation has introduced their new AWWA C515 Gate Valves. These new gate valves feature three different connection types such as push-on, flange x flange, and mechanical joint. The ...

DN: 0.25 mm - 2 mm
Pressure: 500 bar

Two-way ball valves for high pressure up to 500 Bar ( depending on the size ) available in sizes from 1/4" to 2"

DN: 0.25 in
Pressure: 1.4 bar - 7 bar
Temperature: -20 °C - 70 °C

Lock Up Valve, YT-405 sense the main supply pressure and shuts down the air flow when the pressure is lower than setting level to avoid system shutdown or damages to pipelines. - Due to its compact ...

DN: 0.5 in - 3 in
Pressure: 200 psi
Temperature: -50 °F - 400 °F

TECVAL Tank Blanketing Valves are designed to reduce gas losses on low pressure storage tanks. Devices are manufactured in stainless or carbon steel, sizes from ½” to 3” in flanged or threaded end types. Standard operating ...