- Hydraulics - Pneumatics >
- Pipe, Tube and Fitting >
- Pneumatic fitting >
- Staubli
Staubli pneumatic fittings
Mounting of nozzles on standard tubing Pipes offtakes Installation of manometers Designed to quick-clamp our nozzles with threads from 1/8″ to 3/4″ O-Ring seal (maximum pressure varies with connector type) Good chemical and thermal-resistant ...
Diameter: 0.125 in - 1 in
Operating pressure: 0 psi - 100,000 psi
Pipe Fittings with MAWP up to 15,000 PSI (1034 bar) Features Safety weep holes standard on all connections Faceted edges make handling easier and reduce the risk of injury Supplied with complete collars ...
Diameter: 80 mm - 710 mm
The easy to assemble duct components of Nordfab Quick-Fit ducting, allow fast installation with no special tools, no welding, and no paint. By using a Clip-Together ducting, the installation time and costs are being reduced, making Nordfab ...
Nordfab
Diameter: 0.25, 0.38 in
TURALI HOLDING
Diameter: 9.5 mm - 19 mm
The 60PS-PE3 Series is composed of Large Flow Couplings developed by LinkTech. They are equipped with a panel mount hose barb socket. The 60PS-S3-06 and 60PSV-SE3-06 models have tubing size of 3/8" ID. The 60PS-S3-08 and 60PSV-SE3-08 ...
LinkTech Quick Couplings, Inc.
Diameter: 0.25 in - 0.5 in
Operating pressure: 15 bar
The In-Die Quick Connect allows Unist spray nozzles to be permanently mounted, ensuring they remain in position with each die change. The In-Die Quick Connect allows Unist spray nozzles to be permanently mounted, ensuring they remain ...
Diameter: 0.13 in - 0.75 in
Operating pressure: 0 bar - 21 bar
... sealing surfaces to assure leak-proof connections. The model 36275 ball fitting features a lock ring that holds the nozzle in position when jarred or subjected to vibration. The fitting has a relatively ...
Diameter: 4 mm - 16 mm
Operating pressure: 20 MPa
. One-Touch push-to-connect configuration allows an instant tubing connection . Smooth-Edge release sleeve design facilities a quick tubing disconnection . Aesthetically pleasing nickel-plated metallic optional feature ensures anti-contamination ...
Operating pressure: 42 bar
Features Multi-packed in bag for wholesale Brass adapter and gasket kit Adapts male threaded gas cylinders to male flare outlet for charging or recovery
Henry Technologies
Diameter: 1.33 in - 6 in
UHV rated to 1x10-13 High temperature rated to 450ºC OFE Copper or optional Viton® elastomer gaskets Clearance bolt holes Conflat® compatible design Standard matte finish Radiussed tube Both flanges rotatable
MDC vacuum products
Diameter: 50 mm - 1,250 mm
Tender specification PVC HOKA PVC 90° bend with socket plastic fitting round with interior stop for connecting pipes in an exhaust system by welding process. Socket inside diameter on the basis of DIN 8062, R=D manufacturing ...
HoKa GmbH
Diameter: 0.38 in - 1.25 in
Operating pressure: 21 bar
Dual-guide sleeve tabs will ensure smooth collar action during connection and disconnection • Convenient ‘Push-Twist and Click’ connection provides a positive locking condition while connected • Pneumatically energised seal provides an ...
DIXON EUROPE
Diameter: 1, 2, 2.5, 3, 4 in
Operating pressure: 150 psi - 360 psi
Twist-Lok™ represents the latest addition to OPW’s industry-leading range of Dry Disconnect Couplers. With its user-friendly operation and simple handling, the Twist-Lok provides a quick, easy connection with minimal product loss. Features ...
Operating pressure: 0 psi - 150 psi
COMPACT PUSH IN FITTINGS PC-C Compact push in fittings PC-C are ideal for small type of pneumatic piping. Compact push in fittings is 40% smaller volume ratio in comparison ...
XHnotion
Operating pressure: 300 psi
Push-to-Connect Advantages Ready-to-use compact one-piece fitting for use with most thermoplastic tubing. This fitting is specially designed for low pressure circuits where fast assembly, disassembly ...
Nycoil
Diameter: 32, 25, 19 mm
... Possible to Reuse the Fittings…Since E-ELF is a nut type ferrule fittings, it is easy to install at site. When you replace a hose, you can reuse a fitting. Point 2.Sanitary Fittings…Because ...
HAKKO CORPORATION
Diameter: 15 mm - 100 mm
Operating pressure: 150 psi
Hayward's BFAS Series bulkhead fittings feature an FPM or EPDM gasket seal, a short pattern/barrel in PVC, CPVC, or PP along with their left-handed threads and heavy-duty buttress threads which are for hindering leaks ...
Hayward Industries, Inc.
identical and interchangeable with all common competitive products availability all over the world thanks to the representations and warehouses present in any industrialized country traceability of charge via heat-code printed ...
... vacuum generator w/ single-touch fitting, VBH-20 vacuum generator, RVC & RVU regulator with quick connector, RC compact air regulator and VCV vacuum check valve.
... made to not collapse and provide constant airflow during operation to all cushions in system. Made from PVC and 3" camlock fittings.
... suction cups,vauum system. They are thread fittings,barb fittings,one-touch fittings,quick screwed fittings,spring plunfers. Quick and easy to use,can be re-used thousands ...
TBM LIMITED
Diameter: 0.13 in - 1 in
Diameter: 25 mm - 80 mm
Operating pressure: 10 bar
End Fitting Specifications SMS generally to Swedish SMS1148 specification. RJT generally to British BS4825 Pt 5 specification. End Fitting Materials Spigots in Grade 316L SS Nuts in ...
... coupling system is designed for maximum economy in the sealing and joining of conveyor pipelines. Conveyor pipelines for the pneumatic conveying of bulk materials are subject to heavy wear. Flanged joints, with their ...
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining