- Hydraulics - Pneumatics >
- Valve >
- Regulating valve >
- STAUFF
STAUFF regulating valves
Pressure: 10 bar
Temperature: 150 °C
... single-seat control valves are used for the exact setting and control of parameters such as flow, pressure, temperature, or filling level in aseptic processing plants. An electro-pneumatic positioner enables the exact ...
GEA Procomac S.p.A.
Pressure: 0.5 bar - 16 bar
... semi-automatic drain valves, fully automatic externally fitted drain valves A or B, and fully automatic internally fitted drain valves) can be mounted as an option. Manual Drain ...
Armaturen- und Autogengerätefabrik ewo Hermann Holzapfel GmbH & Co. KG
DN: 15, 25, 20, 32 mm
Pressure: 30 bar
Temperature: -10 °C - 70 °C
Pressure reducing and regulating valve with balanced seat, outlet setting from 1,5 to 6 bar, with upstream 500 micron flow filtering system, connections with ring nut and union.
BONOMI GMBH
DN: 15 mm - 150 mm
Pressure: 20 bar - 420 bar
Temperature: -50 °C - 200 °C
Side Entry Split Body Valves suitable for Oil & Gas production, processing, transportation, distribution, chemical and petrochemical refining including system isolation, pressure level and flow measurement, instrument ...
ERREESSE srl
DN: 10 mm - 50 mm
Pressure: 25 bar
Temperature: -10 °C - 130 °C
... balancing valve, with standard test points and with drain on high pressure test point Additional information Material - Bronze Typology - Static balancing Connection - ISO 228/1 Variable orifice bronze ...
VIR
DN: 150 mm - 500 mm
Pressure: 10 bar
Temperature: 250, 80, 400 °C
For distribution of dusty to medium grained bulk material in two directions. TYPES :Symmetric or asymmetricANGLE BETWEEN THE OUTLETS :30°, 45°, 60°FLANGE DRILLING :JAUDT standard (for angular flanges), (for round flanges)MATERIALS ...
Jaudt Dosiertechnik Maschinenfabrik GmbH
DN: 20, 25 mm
Pressure: 1.6 MPa
Temperature: 5 °C - 95 °C
HTW-71-DV Series electric dynamic pressure balance valve is a dynamic equilibrium with the electric control integration products, mainly for air-conditioning equipment, HVAC system at the end (such as air box, new air ...
Hotowell International Co., Limited
Flow rate: 57 us gal/min - 2,330 us gal/min
... compared to traditional mixing and control valve systems. The mixing valve system is a highly optimized temperature control system with patented valve disc system, swirl mixing action, ...
Armstrong International, Inc.
Pressure: 0 bar - 16 bar
Flow rate: 40 l/h - 200 l/h
... system enables the valve to close. INSTALLATION The gas chlorine pressure reducing valve is always mounted in a chlorine system, so the installation depends very much on the system. When taken ...
DN: 80 mm - 900 mm
Flow rate: 0 l/s - 2,132 l/s
106 / 206-PR-SM is a pressure reducing control valve with an integral back-up which is the 81-RP pilot wherein it protects the device against diaphragm or pilot failure and reduces unnecessary maintenance. This product ...
Singervalve
DN: 50 mm - 150 mm
Pressure: 16 bar - 40 bar
... cavitation conditions. The piston is connected to the valve stem without end play. All ERHARD Control Valves are equipped with mechanical position indicator as a standard. ERHARD Control Valves ...
Belgicast
DN: 50 mm - 150 mm
Pressure: 16, 10 bar
Temperature: -10 °C - 170 °C
The valves in the 04.1 series are three-way, diverter ball valves made of cast iron, with floating ball, manufactured in accordance with the most severe product standards and the quality management of ...
Brandoni
Pressure: 345 bar
Flow rate: 91 l/min
... and combining modes Operation In the dividing mode, the valve will divert input flow from port ③ to port ② and ④ ,based on the ratio specified, regardless of operating pressure.The valve will combine ...
Wenzhou Meric Hydraulic Technology Co.,Ltd
Pressure: 0 bar - 7 bar
... microfluidic valve for injection or selection of up to 10 different fluids or chips. The flow is bidirectional in the valve. The device can be used as a selector or as a distributor for either multiplexing ...
FLUIGENT
Pressure: 60 psi - 100 psi
The CA300 is a plastic dispensing valve suitable for applying cyanoacrylate adhesives and anaerobic chemistries. This versatile diaphragm dispense valve can be used for single component bead, dot, potting, ...
PVA
... that has clumped together in storage, dust formation, ensuring exact/calibrated quantities etc. Product range ■Flat slide valves ■Chutes ■2-way switches Properties/variants Applications For flowing or pourable bulk ...
Segler-Förderanlagen Maschinenfabrik GmbH
DN: 0.125, 0.25, 0.375, 0.063 in
Pressure: 10,000, 15,000 psi
Temperature: 650, 450, 350, 200 °F
... and AF6 for on-off service and insure long life on valve seats. Regulating tip stems are available at no additional cost, add - REG to the catalog number. Glands and sleeves are supplied with each valve ...
HIP
DN: 0.375 in
Pressure: 46 bar
Temperature: -40 °C - 120 °C
• Differential valves are mounted on refrigerating and air conditioning installation oil receivers. • They maintain permanent oil receiver overpressure versus the compressor sumps in order to ensure constant oil distribution ...
CARLY
DN: 15 mm - 300 mm
Pressure: 16 bar - 250 bar
Temperature: -50 °C - 130 °C
... more quite than a traditional globe valve. N20 valves are available with an open window cage (for plug balancing purposes only), single, double or a triple cage (for low noise purposes only) Valve ...
Single Loop control valve with pressure ranges from vacuum to 300 psig Small and compact package Standard 0-10Vdc analog monitor output, 4-20mA optional IP65 Housing Proportion-Air's most versatile pressure ...
Proportion-Air
... two-way ball valves. They are commonly used in food processing and wine industry. The products can also be modified to introduce a variety of features that are not included in the catalog, such as the standard threads ...
DN: 50 mm - 900 mm
Temperature: -29 °C - 800 °C
Model:Cast steel globe valves 900lb •Brief description: •Series CSGLV-4 are used to cut or connect the pipe media under nominal pressure Class 900lb, working temperature -29 to 800 degrees in industries including ...
DN: 15 mm - 125 mm
Suitable for use in industrial chemical complexes, for gas and water distribution and food industry Body material from bar (A 105 or AISI 316) Thread ball body-cover Flanges drilled acc.to ANSI Possibility of equipment with handlever, ...
THERMOMESS S.r.l.
DN: 0.45 in - 1 in
Pressure: 16 bar
Temperature: -40 °C - 160 °C
The Siral BSD3000 is a double ball valve with by-pass, service and drain functions, intended for hot/cold water, steam and glycol (50% content). It is capable of withstanding a maximum pressure rating of PN16 at temperatures ...
DN: 25 mm - 200 mm
Pressure: 10, 16 bar
... OUTFLOW TANKS. • THE RISING OPENING SYSTEM BREAKS THE SEDIMENT OR CRYSTALLIZED LAYER ON THE BOTTOM OF THE TANK BOTTOM DRAIN VALVE • Rising opening. • This model can be made, with manual action by handwheel, or by ...
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining