Sterling electric pumps

Flow: 0 l/min - 15.1 l/min
Pressure: 35 psi - 60,000 psi
Power: 37 kW

A16B Pump Performance In order to meet the demands of different customers, APW launched A16+B Intensifier Pump. Compared with A16, a remarkable advantage of A16+B is that it equips one spare intensifier. ...

Flow: 0 l/min - 15 l/min
Pressure: 35 psi - 60,000 psi
Power: 37 kW

... A16 Pump System Parameter Power: 50hp (37kw) Max. Cutting Pressure: 60000PSI (413.685MPa) Max. Water Flow Rate: 1.0gpm (3.8lpm) (55,000PSI/380MPa) Max. Orifice Diameter (0.33mm) Control Power ...

Flow: 0 l/min - 15.1 l/min
Pressure: 35 psi - 60,000 psi
Power: 75 kW

A16*2 Pump Performance APW waterjet A16*2 pump is the New Generation of waterjet pumps, which is powered by high-pressure waterjet dual-intensifiers. There are 2 intensifiers in this ...

Flow: 400 l/min
Head: 32 m
Power: 0.18 kW - 3 kW

The MPN Pump Series is particularly suitable for crystallizing media (no air can get inside), toxic or environmentally hazardous media. A small amount of gas in the liquid can also be transferred without ...

Flow: 140 l/min
Head: 14 m
Power: 0.55 kW

In the MDN Pump Series, the motor power is transmitted contact free and abrasion-free with a magnetic coupling through the closed housing wall (“Slot-pot”) to the pump ...

Flow: 500 l/min
Head: 40 m
Power: 0.18 kW - 5.5 kW

In the U Pump Series, the motor power is transmitted without slip directly to the pump impeller with a rigid shaft (no magnetic coupling). A mechanical seal prevents ...

Flow: 0.3 us gal/h - 3.2 us gal/h
Pressure: 0.15 bar - 1.2 bar
Power: 15 W

... Start inputs built into the pump, enabling either proportional or On/Off control. • IP65 Equivalent Protection A robust housing protects the pump from normal wear. Mounting the Digital Display and Key ...

Flow: 0.6 us gal/min - 6.7 us gal/min
Pressure: 150, 290, 73 psi
Fluid temperature: -10 °C - 60 °C

... the EWN-Y Pump: • The EWN-Y Series pump combined with EFS flow sensor provides accurate real-time control and display of the dosing rate. • Set point control allows the desired ...

Flow: 0.6 us gal/h - 6.3 us gal/h
Pressure: 30 psi - 150 psi
Fluid temperature: 0 °C - 60 °C

EZ Series electronic metering pumps offer precise chemical injection at a low cost. The compact size and simple control make them ideal for water treatment and OEM applications. Key ...

Flow: 1,400 m³/h
Pressure: 25 bar
Head: 220 m

Standard chemical process pumps of the SIHIISOchem range are horizontal, single-stage volute casing pumps with dimensions to DIN EN ISO 2858. They meet the technical requirements of EN ISO 5199. It is ...

Flow: 2,200 m³/h
Pressure: 25 bar
Head: 160 m

... bearing unit towards the drive end, without the pump casing having to be disconnected from the piping. If a spacer coupling is used it is also unnecessary to disconnect the motor. Applications: Series ...

Flow: 1,800 m³/h
Pressure: 16 bar
Head: 140 m

Pumps of the series SIHISuperNova ZLN are horizontal, single-stage volute casing pumps with connections and main dimensions to DIN 24255 / EN 733, plus 19 additional sizes. The design of the pump ...

The propellant pump is especially suitable for bringing liquified propellants with a low boiling point to a high pressure. The pump guarantees a constant propellant pressure in the supply line and in ...

Flow: 600 m³/h
Pressure: 16 bar
Power: 200 kW

ECW series are single stage, end suction, back pull out, top centreline discharge type. These are offered with different material of construction to handle clear and slight raw water. Dynamically balanced impeller ensures vibration and ...

Flow: 720 m³/h
Pressure: 16 bar
Head: 110 m

Single stage chemical process pumps are mainly used to handle different type of chemicals with slight impurities. These pumps are offered with different material of construction according to the liquid ...

Flow: 2,500 m³/h
Pressure: 16 bar
Head: 100 m

Medium consistency pulp and process pumps are used to handle different type of syrup, molasses, pulp, paper stock, raw water etc and it can be used maximum consistencies upto 8%. Dynamically balanced semi open impeller ...

Flow: 85 l/min
Head: 19 m
Power: 500 W

... for idle running •230 V / 500 W motor with A 5 M cable and plug •Suitable for dispensing diesel, heating oil, hydraulic oil, machine oil, engine oil, etc •Pump interior in aluminium •Ready-to-use ...

Pressure: 31 bar
Fluid temperature: 5 °C - 40 °C

... Lubricator is an automatic, robust and durable pump. Its compact size is designed to fit your space requirements and lubrication demands. The SureFire II Lubricator is a self-contained electric ...

Pressure: 31 bar
Fluid temperature: 5 °C - 40 °C

VISCOSITY RANGE - 20-1500 CST PHASE - 1 PHASE HZ - 50/60 MOTOR ELECTRICAL CONNECTOR - CABLE GLAND INTEGRATED CONTROLS - TERM STRIP + MOMENTARY SWITCH LEVEL MONITORING - LLS PRESSURE GAUGE - INCLUDED RESERVOIR ...

Pressure: 9 bar
Fluid temperature: 5 °C - 40 °C

VISCOSITY RANGE - 20-1500 CST MOTOR ELECTRICAL CONNECTOR - CABLE GLAND INTEGRATED CONTROLS - TERM STRIP PRESSURE GAUGE - INCLUDED OUTLET THREAD - 1/4BSPP RETURN LINE THREAD - 1/4BSPP IP RATING - IP54 OPERATING ...

Flow: 0 l/h - 1,600 l/h
Pressure: -0.8 bar - 2 bar

Easy to replace valves Single-piece bellows Conveys sample gas with condensate Proven pump technology Attractive price Requires little space Mounting accessories and fittings optional Housing version IP20 Optionally ...

Flow: 0 l/h - 1,600 l/h
Pressure: -0.6 bar - 1.4 bar

Easy to replace valves Single-piece bellows Conveys sample gas with condensate Proven pump technology Attractive price Requires little space Mounting accessories and fittings optional Housing version IP20 Optionally ...

Flow: 800, 400 l/h
Pressure: -0.6 bar - 2 bar

... 115 V - versions with FM C-US approval C-versions specifically for conveying flammable gasses Bypass valve for PTFE and VA pump body Gas analysis is key for safe and efficient system operation in the chemical industry, ...

Flow: 0 l/min - 5,000 l/min
Head: 0 m - 98 m
Power: 11 kW - 75 kW

... support structure enable motor removal safely without chemical leakage. ISO compliant The MDW is dimensionally compliant with the international standard (ISO2858, 3661) and is interchangeable with conventional ...

Flow: 0 l/min - 4,000 l/min
Head: 0 m - 55 m
Power: 4 kW - 37 kW

... transfer of strong acids and alkalines as well as nearly all chemical solvents. Superior durability The exterior of the pumps is covered with ductile cast iron. Ample pressure resitance has been provided in the rear ...

Flow: 0 l/min - 1,400 l/min
Head: 13.5 m - 74 m
Power: 1.5 kW - 15 kW

... contact surfaces in the front and rear areas of the pump. Therefore high temperatures are avoided. This greatly improves resistance against dry running in comparison with conventional mag. drive ...

Flow: 5,000 l/h
Pressure: 2 bar - 2.5 bar
Power: 0.7 kW

... alkaline brass plating. TECHNICAL SPECIFICATIONS PUMP It is made of anticorrosive or highly protected materials to withstand acids and dangerous filtering-liquid components • Polypropylene (Moplen) pump ...

Flow: 25,000 l/h
Pressure: 2 bar - 2.5 bar
Power: 4 kW

... alkaline brass plating. TECHNICAL SPECIFICATIONS PUMP It is made of anticorrosive or highly protected materials to withstand acids and dangerous filtering-liquid components. • Polypropylene (Moplen) pump ...

Flow: 5,000 l/h
Pressure: 1.8 bar
Power: 0.7 kW

... bar): ca. 1,8-2 N.B. The filter pumps of the series CESE marked with the letter “M” are equipped with a magnetic entrainment pump, which is designed without mechanical seal. This constructional feature ...

Flow: 10 l/min

... Quick cleaning and inspection of pump with its simple design. Sintered steel gears By-pass valve incorporated within pump body Motor is protected by IP55 rating Supplied with connection ...

Flow: 25 l/min

Macnaught 240V Electric oil pump. 1"BSP inlet and outlet. 25l/min free flow Technical Specifications Voltage - 240V Current - 4.5A Power - 828W Duty Cycle - 30min Inlet ...

Flow: 50 l/min

Macnaught 240V Electric oil pump. 1"BSP inlet and outlet. 50l/min free flow Technical Specifications Voltage - 240V Current - 7A Power - 1081W Duty Cycle - 30min Inlet ...

Flow: 43 l/min
Power: 216 W
Length: 140 mm

Electric vane pump, 12 VDC and 24 VDC, selfpriming, for the transfer of diesel, with transport handle, ON-/OFF-switch and 2 m – cable with alligator clamps for battery connection.

Flow: 11 l/min
Pressure: 15 bar
Power: 0.55 kW

Electric, selfpriming gear pump for the supply of AdBlue®; guarantees a constant flow and a low noise level. Pump body in stainless steel AISI 304, gears in plastic. Protection category ...

... centrifugal pump is based on the conversion of electrical energy into mechanical energy, which is then used to move liquids through pipes or tubes. The pump consists of an electric motor, ...

Flow: 4 m³/h - 1,200 m³/h
Head: 8 m - 150 m
Power: 2.2 kW - 180 kW

... Hydraulic pump develops into HOT WATER CIRCULATION PUMPS (KYWR/KYLR), chemical engineering pump (KYHL), oil pump (KYYG) and ex proof chemical pump (KYHY) ...

Flow: 18 m³/h - 504 m³/h
Power: 0.75 kW - 160 kW
Fluid temperature: -15 °C - 120 °C

... is in the center of the pump legs, which improves the performance smoother and contributes to longer service life. - The inlet and outlet are inline structures, which simplifies the installation of the pipelines. -The ...

Power: 1.13 ch - 3 ch

... or system requires a pump and many require additional accessories. TorqLite offers several different options for both electric and air consoles to power hydraulic wrenches. We provide ...

Pressure: 10,000 psi

... heavy duty pump made for multiple applications with full control over advance, hold and retract operations. The electric pump features a 10’ remote motor control with a low voltage starting ...

The TL-PM-EH-1500 Electric motor with gear pump is designed to provide optimal service with bolt tensioner or hydraulic tools single-acting. Equipped with remote control with 5 m. cable for easy use, ...

Flow: 760 m³/h

... duplex (direct acting) Product Category: RECIPROCATING PUMPS Reciprocating power pumps are designed with exceptional versatility to efficiently..... The ClydeUnion Pumps ...

Flow: 705 m³/h

... simplex (direct acting)… Product Category: RECIPROCATING PUMPS Reciprocating power pumps are designed with exceptional versatility to efficiently..... The ClydeUnion Pumps ...

Flow: 12 m³/h
Power: 0.37, 0.25 kW
Weight: 8, 12 kg

The FL20C centrifugal pump is well known for its small size and high performance. Despite their small size, these pumps can provide flows up to 12 m3/h with good outcomes. FL20C pumps ...

... consisting of Water Pumps, Thermostats, Thermostat Kits, Switches & Sensors, Coolant Flanges and Radiator Caps. In the quest to reduce engine emissions, there is a growing trend among ...

Flow: 0 m³/s - 40 m³/s
Pressure: 0 bar - 40 bar
Fluid temperature: 0 °C - 120 °C

Vertical immersion pumps are multistage centrifugal pumps for installation on the mounting flange of tanks. PUMPED LIQUIDS Light, non-explosive, clean or contaminated liquids. Water Cutting fluid Lubricants

Flow: 0 m³/h - 110 m³/h
Pressure: 0 bar - 40 bar
Fluid temperature: 0 °C - 120 °C

Vertical in-line pumps Vertical and multistage centrifugal pumps. The in-line design enables the pump to be installed on pipes where the suction and discharge ports are on the same horizontal ...

Flow: 0 l/min - 650 l/min
Pressure: 0 bar - 100 bar
Fluid temperature: 0 °C - 60 °C

High pressure pumps High pressure spindle pumps. Solution for deep boreholes and the high pressure clearance of chippings. PUMPED LIQUIDS Light, non-explosive, clean liquids with at least 5% of ...

Flow: 100, 120 l/min
Pressure: 8 bar
Power: 0.35 kW

The OIL-LESS pump units range completely manufactured in Italy by NARDI COMPRESSORI stand out for their high quality, the prime materials and components installed ensure their long life and top performance. With their ...

Flow: 115, 145 l/min
Pressure: 15 bar
Power: 1.1 kW

... and forced air cooling systems, they can work long hours with little maintenance. This EXTREME 15 BAR pumping unit version comes with a 1,5Hp motor in single-phase and it can reach a maximum working ...

Flow: 36, 43, 29, 35 m³/h
Pressure: 10 bar
Power: 1.9, 2.2 kW

The OIL-LESS pump units range completely manufactured in Italy by NARDI COMPRESSORI stand out for their high quality, the prime materials and components installed ensure their long life and top performance. With their ...

Flow: 5.5 l/h - 1,000 l/h
Pressure: 10, 40 bar
Power: 0.18, 0.25, 0.37, 0.55, 0.75 kW

... Manually with graduated knob Motor speed regulation via inverter Electric servomotor adjusts pump flow rate remotely Aluminium housing: for excellent operating performance even in ...

Flow: 0.21 m³/h - 67.69 m³/h
Pressure: 39 bar - 1,146 bar
Power: 2.2 kW - 110 kW

3C Triplex Pumps Series Process pumps for high-pressure duties A flexible, robust and reliable solution to pumping high temperature, abrasive and viscous liquids in a multitude of industrial applications, ...