VULKAN sleeve and shear pin couplings

Torque: 0.98 Nm - 215 Nm
Rotational speed: 0 rpm - 5,000 rpm

... difficult installations – all block couplings have through bores Inexpensive replaceable wear element Internal grease reservoir provides continuous flow of lubrication driven by centrifugal force, allowing coupling ...

... Diagonal couplings is loaded in shear,as well as tension. This results in Diagonal couplings having a somewhat higher load capacity than straight couplings, where the ...

PRODUCT BORFLEX LARGER GRIP COUPLING PRESSURE Max.PN40 RUBBER EPDM-NBR-SİLİKON-VİTON MATERIAL AISI 304, AISI 316, AISI 316L,St52 NAIL AISI 301

Torque: 2 Nm - 10,000 Nm
Rotational speed: 10,000 rpm

Torque: 0 ft.lb - 3,291.6667 ft.lb
Rotational speed: 1,800 rpm - 7,500 rpm

... Wood’s Dura-Flex® couplings are designed from the ground up using finite element analysis to maximize flex life. Perfect for a wide variety of applications -- including those with uniform to heavy shock loads -- Dura-Flex® ...

Torque: 0.71, 1.27, 1.06, 0.85 Nm

... 303 Stainless Steel CENTER: Molded Neoprene, Durometer 73 • MOLDED NEOPRENE CENTER • SHAFT-TO SHAFT INSULATION • FAIRLOC® AND PIN TYPE HUBS • TORSIONAL VIBRATION ISOLATION

Torque: 249 Nm - 186,000 Nm
Rotational speed: 0 rpm - 4,800 rpm

... roller chain coupling consists of one duplex roller chain and two sprockets for a simplex chain. Handling is very simple as both the shafts (driving shaft and driven shaft) can be connected and disconnected by inserting ...

UHV rated to 1x10-13 High temperature rated to 450ºC OFE Copper or optional Viton® elastomer gaskets Clearance bolt holes Conflat® compatible design Standard matte finish Used for short misalignment connections ...

... gear couplings of our own design. They are easier to connect or disconnect than chain couplings. ● The gear teeth of the inner hubs are crowned to allow for up to 5° of shaft angle offset. ● Due to induction ...

... within the hub and contracts on the shaft,locking everything into place. Keyword Search : keyless shaft coupling / sleeve and shear pin / Fitting / coupling

Torque: 0.1, 0.5, 1 Nm
Rotational speed: 16,000, 3,000, 1,000 rpm

Coupling is a device which connects two shafts with for purpose of transmissioning motion. Coupling compensates geometrical misalignments and axial motion of connected shafts, enables the encoder work ...