Witte Pumpen chemical pumps

Steel drum-pump Order-number: 7892 Details Hand pumps for diesel and lubricants -robust construction -no energy source required -low-cost -2” connector -suction tube can be ...

Crank pump for AdBlue® / DEF / ARLA 32 Order-number: 10517 Details Crank pump for AdBlue® / DEF / ARLA 32, antl-freeze, water -solid construction for professional operation -housing in stainless ...

Hand pumps for canisters Order-number: 10054 Details Hand pump for canisters up to 30 I -material: plastic, polypropylene and polyethylene -food-safe -double-action -outlet tubes ...

Flow: 11 l/min
Pressure: 15 bar
Power: 0.55 kW

Electric, selfpriming gear pump for the supply of AdBlue®; guarantees a constant flow and a low noise level. Pump body in stainless steel AISI 304, gears in plastic. Protection category IP 55. Includes ...

Flow: 15 l/min
Pressure: 24 bar

Flow: 200, 10.5 l/min
Pressure: 4 bar
Length: 165 mm

Flow: 10 l/h - 750 l/h
Pressure: 0.3 bar - 6 bar
Fluid temperature: 5 °C - 40 °C

The distinguishing feature of our proportional volumetric dosing pumps is their ability to use the driving force of water to mix and produce a solution always proportional to the volume of water supplied. This means there’s ...

Flow: 1,500 l/h
Pressure: 6 bar
Fluid temperature: 5 °C - 40 °C

The distinguishing feature of our proportional volumetric dosing pumps is their ability to use the driving force of water to mix and produce a solution always proportional to the volume of water supplied. This means there’s ...

Flow: 10 l/h - 2,500 l/h
Pressure: 6 bar
Fluid temperature: 5 °C - 40 °C

The distinguishing feature of our proportional volumetric dosing pumps is their ability to use the driving force of water to mix and produce a solution always proportional to the volume of water supplied. This means there’s ...

Flow: 0 l/min - 1.5 l/min
Fluid temperature: -60 °C - 120 °C
Length: 210 mm

... tubing size based on the following chart. Support manual mode Support fully automatic cycle Semi-automatic cycle Manual start/stop Speed control Basic Parameters Current: 2A max Pump ...

Flow: 0.12 l/min - 1.52 l/min

Small volume, high flow Easy to replace the pump tube Stainless steel rotor, long life Stepper motor, precise control Suitable for viscous and non-viscous liquid transfer The wall thickness of the ...

Flow: 0.001 l/min - 0.485 l/min
Pressure: 0 bar - 2 bar
Head: 2 m

... 485ml/min.(For intermittent work only) 300RPM supports continuous working mode Easy to operate, can quickly replace the pump tube; High precision, low noise, simple structure, maintenance-free Two tube clamp ...

Flow: 0.002 l/min - 1 l/min
Power: 20 kW
Length: 190 mm

SP 311 Peristaltic Pumps Peristaltic pumps ideal for transferring gas, liquids, mixtures and emulsions in various industries. Easy to use and Reliable • Minimum maintenance (just replace the tube) • ...

Flow: 45 l/min
Pressure: 2 bar - 6 bar
Input diameter: 1.5 in

... supply / transfer with recirculation PUMP PERFORMANCE Ratio: - 8:1 b Max cycles / minute: - 60 Displacement per cycle: - 757 civil code Air consumption @ 6 bar: - 2700 Nlpm PUMP SPECIFICATIONS Lower ...

Flow: 15, 19, 10, 13 l/min
Power: 12, 8.5, 11 W
Length: 105 mm

... Type Built-in use • Air mat, air bed (continuous air exhaust) • Air bearing • For burner (air supply) • Scientific & chemical instruments (analysis and agitation)

Flow: 17, 13 l/min
Pressure: -35,000 Pa - 35,000 Pa
Power: 8, 11 W

Pressure & vacuum Type Built-in use *No power plug included because it is designed for built-in use. *Rubber-made legs are sharp-pointed. Not for self-standing installation. • Air mat, air bed (continuous air ...

Flow: 2,800 m³/h
Fluid temperature: 180 °C

... thermal shock. The CUP-BB5V range has been designed to produce an advanced pump with reduced whole life costs. All the pump internals can be withdrawn quickly without disturbing pump ...

Reciprocating Pumps Product Category: RECIPROCATING PUMPS Reciprocating power pumps are designed with exceptional versatility to efficiently. These units are driven via electric ...

Flow: 760 m³/h

... duplex (direct acting) Product Category: RECIPROCATING PUMPS Reciprocating power pumps are designed with exceptional versatility to efficiently..... The ClydeUnion Pumps direct ...

Flow: 0.03 l/min - 1 l/min
Pressure: 0 bar - 2.5 bar
Input diameter: 0.3 mm - 6.4 mm

LabDos® peristaltic pumps are displacement pumps on which rollers force the medium which is to be fed through a hose from the outside. The fed material thus does not come into contact with metal parts ...

Flow: 0.00012 l/h
Pressure: 200 mbar - 2,200 mbar
Fluid temperature: 0 °C - 60 °C

- Peristaltic pump for wall or front-panel mounting - Reliable condensate removal - Self-priming: pump creates a suction force to draw liquid upwards - With return stop - Rotational speed: 1 rpm - Material ...

Flow: 0.3 l/h
Pressure: 200 mbar - 2,200 mbar
Fluid temperature: 5 °C - 50 °C

- Explosion-proof version according to ATEX for zone 1 - Peristaltic pump for wall or front-panel mounting - Safe condensate removal - Self-priming: pump creates a suction force to draw liquid upwards - ...

Mohno screw pump Key Features Working Principles: Mohno Pump is a container type pump with a single shaft , turning eccentrically; it is composed of a rotor and a stator. The rotor ...

HIGH VISCOSITY MATERIAL FEEDING PUMP THIN MEDIUM FEEDING PUMP SANITARY FEEDING PUMP HEAT PRESERVATION SLEEVE DESIGN WATER CLEANING MECHANICAL SEAL AVAILABLE ALMOST HAVE ...

Flow: 30 m³/h

... CIP self-priming pump adopts acid-resisting stainless steel (AISI 316) in its valve body. This has a unique resistance to alkali and acid. The positive displacement pump has features which are superior ...

... Enterprise introduces a rectangular inlet-outlet lobe pump which can transfer 1,000,000cps of high viscosity liquid which is designed to let the high viscosity liquid be sucked unto the lobe pump easily. ...

Flow: 34 l/h - 336 l/h
Pressure: 238 bar
Weight: 15 kg - 38.2 kg

The Williams “W” Series Plunger Pumps offer a packed plunger design The Williams “W’ Series is a piston plunger pump with a mechanical seal. It is capable of precisely injecting chemical ...

Flow: 35 l/h
Pressure: 903 bar

The “V” Series pump is a range of compact, self-contained, pneumatic metering pumps suitable for injecting a wide variety of chemicals that range from 0.07 gph to 9 gph (0.27 lph to 34 ...

Flow: 111.66965, 2, 5 l/h
Pressure: 3,000, 2,500, 1,600 psi
Weight: 12.2, 55.1, 62.1 kg

WILROY Series Hydraulic Diaphragm Pump The WILROY metering pump is a unique blend of Williams and Milton Roy pump technology The WILROY is a pneumatic-hydraulically actuated diaphragm ...

This high-powered, self-priming transfer pump achieves up to 200 gpm (757 lpm) and 58 psi (4.0 bar). The series includes 1542P-55SP, 1542P-65SP, 1542P-65ESP, 9342P-HM1C-5SP, and 9342P-HM5C-5SP. Key Features Close-coupled, ...

... long shafts and couplers between the pump and motor. The broad, versatile line includes models with rugged housings of cast iron and stainless steel that stand up to strong chemical herbicides. Stainless ...

... self-priming centrifugal pumps handle big, high-capacity spraying jobs and tank filling with ease. They offer outstanding performance without the need for a flooded suction inlet. The pumps are ideal ...

... can be carried with the pump at rest or in operation and it can be manual or automatic through automatic actuator driven by 4-20 mA; different BUS; pneumatic. Accuracy within ± 1% within 10-100% of ...

Flow: 44 l/h - 3,569 l/h
Pressure: 40 bar - 250 bar

... be carried with the pump at rest or in operation and it can be manual or automatic through automatic actuator driven by 4-20 mA; different BUS; pneumatic. Accuracy within ± 1% within 10-100% of rated ...

Flow: 44 l/h - 3,569 l/h
Pressure: 50 bar - 250 bar

Positive Return Sandwich Hydraulic Diaphragm Pump SDI Sandwich Hydraulic diaphragm dosing pumps comply with mechanical and performance API 675 standards. Furthermore they comply with ATEX standard, ...

Flow: 1.3, 3.1, 7 m³/h
Pressure: 7 bar

Almatec C-Series The Cost-Effective Plastic AODD Pumps The Almatec® C-Series Air-Operated Double-Diaphragm (AODD) Pump is a cost-effective, reliable and superior-built alternative and features a solid ...

Flow: 0.9 m³/h - 36 m³/h
Pressure: 7 bar

Almatec E-Series State-Of-The-Art Plastic AODD Pumps The development of the E-Series was based on the extensive experiences with the proven pump models. The solid design with distinctive wall thicknesses, ...

Flow: 10 m³/h - 100 m³/h

... manufacturing a variety of specialty pumps for supplying and circulating chemicals in the semiconductor industry. With its straight-through flow pattern technology, the Almatec FUTUR Series Air-Operated ...

Flow: 0 l/min - 4,000 l/min
Head: 0 m - 55 m
Power: 4 kW - 37 kW

... These materials enable the secure transfer of strong acids and alkalines as well as nearly all chemical solvents. Superior durability The exterior of the pumps is covered with ductile cast iron. Ample ...

Flow: 0 l/min - 5,000 l/min
Head: 0 m - 98 m
Power: 11 kW - 75 kW

... areas with a wide range of liquid specific gravities. Highly chemically resistant Fluoroplastic and fine ceramic wetted parts offer high resistance to virtually every industrial chemical, ...

Flow: 0 l/min - 1,400 l/min
Head: 13.5 m - 74 m
Power: 1.5 kW - 15 kW

... contact surfaces in the front and rear areas of the pump. Therefore high temperatures are avoided. This greatly improves resistance against dry running in comparison with conventional mag. drive fluororein ...

Flow: 400 l/min
Head: 32 m
Power: 0.18 kW - 3 kW

The MPN Pump Series is particularly suitable for crystallizing media (no air can get inside), toxic or environmentally hazardous media. A small amount of gas in the liquid can also be transferred without ...

Flow: 140 l/min
Head: 14 m
Power: 0.55 kW

... applications) negative pressure tight for vacuum systems no metal parts are in contact with the medium easy to maintain (wear parts can be changed swiftly) universally applicable, quiet and compact The ...

Flow: 500 l/min
Head: 40 m
Power: 0.18 kW - 5.5 kW

... centrifugal pump. Advantages of the U Pump Series: also applicable for higher viscosities or metallic particles in the medium the highest chemical resistance robust, thick-walled design ...