Solenoids
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
... stops. With proper controls and application damping it is possible to achieve exceptionally low dB levels. This high-speed solenoid actuator is self-contained in an industry standard size which enables easy mounting ...
Johnson Electric
Voltage: 24, 12 V
Force: 5 N - 190 N
Stroke: 26, 45 mm
Single winding linear solenoids, ideal for high-precision movement with consecutive duty cycles, they provide a constant force throughout both the pushing and pulling strokes. They can be used for intermittent duty cycles.
AB TRASMISSIONI SRL
Voltage: 12 V
Force: 19 N - 85 N
Stroke: 30, 20 mm
Single-coil linear solenoids, ideal for movements with non-stop duty cycles and high movement precision. They offer a constant force throughout the stroke in both pushing and pulling applications. They can be used for ...
AB TRASMISSIONI SRL
Voltage: 12 V - 24 V
Force: 3 N - 13 N
Stroke: 0 mm - 12 mm
Single-acting linear solenoids, ideal for small movements, they provide a constant force throughout both the pushing and pulling strokes. They can be used for continuous operation with ED=100% or can be customized for ...
AB TRASMISSIONI SRL
Voltage: 12, 24 V
Rotating electromagnet type CR with single coil with 45° max. rotation angle, high rotation frequency max. 20 Hz. This high-frequency rotating electromagnet can be used for continuous ED duty=100% or ...
System di Rosati S.r.l.
Voltage: 12, 24 V
Stroke: 0 mm - 20 mm
Linear electromagnet type 36 with single or double coil, for movements requiring high precision and offering a high pulling force, both in traction and thrust. Industrial diesel engines and motion sector in general. TECHNICAL ...
System di Rosati S.r.l.
Voltage: 12, 24 V
Stroke: 0 mm - 30 mm
System di Rosati S.r.l.
Voltage: 205, 24 V
... g Weight complete solenoid: approx. 6 g Coil terminals: Flying leads 10 cm Voltage: 24 V DC 90 % of our solenoids are made to customers’ specifications. Please do not hesitate to contact ...
Kendrion Kuhnke Automation GmbH
Voltage: 205, 24 V
The BI 13-F-24V DC-25% ED is manufactured by Kuhnke, and is a linear solenoid that has an insulation group that complies with the VDE 0110 C 75 standards. The unit has a rated test voltage of 500 V and a voltage rating ...
Kendrion Kuhnke Automation GmbH
Voltage: 205, 24 V
Force: 0.18 N - 12 N
The Bistable Solenoid, developed by Kuhnke Solenoid Technology, is 90% made to customers specifications. It comes with 800 V test voltage, 11 ms drop-out time, 22 ms actuation time (ED), 9.5 W nominal ...
Kendrion Kuhnke Automation GmbH
Voltage: 12 V - 230 V
The JAKA TMEx35/A/B/C/D and TMEx40/A/B/C/D are explosion-proof solenoids developed by Jaksa. They are mainly used as actuators with JAKA solenoid valves. These units are built with I 2G Ex e mb II T4/T5 ...
JAKSA SOLENOID VALVES
Voltage: 12 V - 400 V
The Jaksa Solenoid is developed with IP 65 protection class with properly fitted plug. It comes with continuous duty, +/- 10% at AC and +/- 5% at DC voltage tolerances, and class F or H wire insulation. In addition, this ...
JAKSA SOLENOID VALVES
Voltage: 9 V - 230 V
... Extended life due to reduced heating Preserved flow and pressure ratings of the valve Compatible with most of our solenoid valve range Quiet AC operation Available voltages: 9, 12, 24 V The minimum ...
JAKSA SOLENOID VALVES
Voltage: 220, 12, 24, 110 V
The Series 01V’s Solenoid is equipped with an IP65 IEC 60529 level of protection (with connection). It comes with a ± 10% voltage tolerance. A 100 % duty cycle is guaranteed. The Solenoid is also built ...
Voltage: 12, 220, 24, 110 V
VOLTAGE TOLERANCE: ±10% CLASS OF ISOLATION: H CEI EN 60085 DUTY RATE: 100% ED TERMINALS: INDUSTRIAL AMP IEC 60529 with connector
Voltage: 24 V
Force: 12 N - 30,000 N
Electromagnetic holding magnet High holding force in a compact design, our electromagnets are available in a range of fixings, sizes and forces. Key features Available in a range of sizes Ø15mm to Ø180mm Axial ...
Stephenson Gobin
Voltage: 24, 12 V
Suzzi can provide a range of standard customisable electric windings, coils and solenoids developed to meet more recurring client needs. The historic presence of Suzzi in specific sectors has allowed it to develop standard ...
Voltage: 4 V - 48 V
Delta solenoid offer varied voltage range and different kind of power rating also available. Delta solenoid can associate customer solve the mechanism problem effectively, shorten the design cycle time ...
Voltage: 110, 24, 220 V
... AC: 5,6 VA (inrush) Standard frequencies AC 50 - 60 Hz Voltage tolerance ± 10% of rated voltage Coil insulation class H Solenoid rating 100% ED Electrical connection Fit for connector to DIN 46244 standard See chapter ...
Waircom
Voltage: 24 V
Force: 650, 1,300, 2,000 N
Explosion proof electric door holder magnets - Door holder magnets with 650 N, 1300 N or 2000 N force - Certified according to ATEX, IECEx, DNV-GL - 24 V DC - Cable halogen and silicone free - for use in hazardous locations zone ...
Voltage: 24 V
Force: 140 N - 3,500 N
... performed by the electromagnets and are basically three: Maneuvering electromagnets performing a linear movement on the central axis of the electromagnet, being able to operate any mechanical element ...
Voltage: 24 V
Rugged & compact constructionEffectiveLonger lifeSurePermanent duty cycle . Steel housing . Tapped mounting holes In order to obtain the nominal holding force indicated above, the work piece must cover the entire operating face. Use : ...
Voltage: 24 V
Long service lifeSafeEffectiveHeavy duty & compact construction . Steel housing . Designed for continuous operation . Threaded mounting holes at the rear . In order to reach the nominal holding force the workpiece must cover the entire ...
Force: 440 daN - 2,400 daN
Electromagnets are commonly used in industry for holding and handling pieces. They use a DC power supply and are supplied without a transformer or a rectifier. Maximum working temperature: 60º C. Ingress Protection: IP 65
Voltage: 24, 12 V
Force: 8 daN - 520 daN
Electromagnets are commonly used in industry for holding and handling pieces. They use a DC power supply and are supplied without a transformer or a rectifier. Maximum working temperature: 60º C. Ingress Protection: IP 65
For the subjection and manipulation of pieces. Note: when used for lifting, applying a coefficient of 3, ie the traction force should be three times the weight of the piece to raise.
Voltage: 12 V - 380 V
- Impulse feed from 4,5 to 24 Volts for a period lasting from 20 to 100 ms.
ODE
Voltage: 12 V - 380 V
Coil housing material: EP - Black epoxy resin - class H (180°C) Coil housing material: PET - Black Polyethylene - class H (180°C) Winding: In class H Electrical connections: With connector EN 175301-803 paragraph 5.3.1 Protection degree ...
ODE
Molding material: PA - Black polyamide - class F (155°C) Molding material: PPS - Black poliphenylensulphide - class H (180°C) Molding material: PET - Black Polyethylene - class H (180°C) Winding: In class H Electrical connections: With ...
ODE
Voltage: 24, 12 V
The EVI3 coil system by AMISCO includes a wide range of electrical coils suitable for cartridge valves for mobile hydraulics. The EVI3 coils are designed to fit most of the current applications and offer a choice of electrical terminations ...
AMISCO
Voltage: 24 V
Force: 980 N
The Universal Mount door retainer caters for those locations where the fitting of standard wall of floor mounted units is difficult. The magnet assembly can be rotated through 90° so that wall or floor fitting is possible and the mounting ...
Voltage: 24 V
Force: 1,000, 700 N
Electromagnets with swivel head, for floor, wall or ceiling installation Can be used for many applications, as its head can be rotated Head position can be adjusted to the correct position without interfering with ...
DICTATOR Technik
Voltage: 3 V
Force: 0.09 N
Solenoid open frame type voltage 3VDC force 0.09N stroke 3mm power 0.8W. The force can be significantly increased with limited energized time and with connection to higher supply voltage. The solenoids ...
Transmotec Sweden AB
HTS-110’s projected-field magnet is designed for a variety of applications which need unlimited access to a sample above the magnet surface. Combining its peak field of higher than 2.5 tesla above the pole tip, its compactness allows ...
HTS-110
... short solenoid magnets have impressively large bore diameter-to-height ratios for the field strengths available, giving unrivalled optical access to a sample sited at the magnetic mid-plane. Features For example ...
HTS-110
Adapted from our popular LM optical short-solenoids, the LN series brings a low-cost alternative to the researcher where a local liquid nitrogen (“LN2”) supply is available. Features Two models feature HTS coil systems ...
HTS-110
... • All our coils are protected against vibrations and environmental stresses A few examples of simple-effect linear electromagnet control applications : • flaps (vents, sorting, switching) • security (triggers, ...
Voltage: 12 V - 380 V
... requirements. FEATURES JCM (DIN form A) type coil. JCL (DIN form A) type coil. JCS (DIN form B) type coil. Various solenoid coils are available in all voltages to suit the application. CE and UL certified. H-grade ...
Jorc Industrial
Voltage: 120, 24 V
... holding power and high responsiveness in both manual and automated systems. -Controlled by a remote power supply these electromagnets are available in 24VDC,*120VAC models. -Bottom tapped mounting holes for convienient, ...
Voltage: 24, 12 V
Stroke: 1 mm - 8 mm
Proportional solenoid for hydraulic valves – Size 45 Square electromagnet in proven sturdy, long-lasting design. Enclosed by solid square housing, which is affixed to the valve with four screws, this ...
Schienle Magnettechnik
Voltage: 24, 12 V
Twin valve control solenoid for hydraulic valves – Size 2 Twin valve control solenoids combine two separately controllable pressure-resistant single-stroke linear solenoids in a common ...
Schienle Magnettechnik
Voltage: 12 V - 205 V
Valve solenoid with pressure-proof core tube up to 350 bar The force-current characteristics have a rising head curve and can be adapted to customer-specific demands. Specially designed for use in oil hydraulics, ...
Schienle Magnettechnik
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining