|
|
|
The LumiCam 1300 imaging photometer and colorimeter captures complex luminance and color distributions in an instant. A monochrome version of the camera is available for applications requiring luminance measurements without color information. The LumiCam 1300 is based on the Interline CCD sensor ICX-285 from Sony, offering an exceptional signal to noise ratio, low smear and very low blooming. A multi-exposure mode provides up to 6 orders of magnitude of dynamic range in a single image, with an absolute measurement range covering 0.0001 to 100,000 cd/m². Higher luminance values are achievable through the use of optional optical density filters. The compact format of the LumiCam 1300 makes it very flexible and opens a diverse range of possible applications. The accompanying LumiCam Software provides comprehensive functions for convenient analysis and documentation of results.
|
|
|
PM Series™ Imaging Photometers and Colorimeters are highly accurate, CCD camera-based systems useful for making precise spatial measurements of luminance and chrominance. All of our PM Series™ products include Radiant Imaging's powerful data acquisition and image processing software. This tool simplifies system control and provides easy access to a number of analysis capabilities, including chromaticity coordinate information, color temperature, angular dependence of display properties, and even Mura defect detection. Built-in support for ActiveX controls allow the experienced user to develop customized applications, and to perform automated testing using software such as LabView, Matlab, VBA, VBScript, Javascript, C and C++.
|
|
Biochrom WPA CO8000 Biowave Personal Cell Density Meter
Rapid, low cost cell density measurement, anytime, anywhere
- Simple
- Reliable
- Portable
The CO 8000 is an easy-to-use instrument to measure the density of cells in suspension (i.e. yeast cells and bacterial cultures) by measuring Absorbance(OD) at 600nm.
Completely portable, this hand-held instrument has a rechargeable battery so it can be used in incubation cabinets, under anaerobic conditions, or in fume hoods and safety cabinets.
- LED Light Source for stable results and no maintenance.
- No warm up time.
- Saves last 99 results for download to PC or Printer.
- Accepts 10mm cuvettes, or 16mm tubes (Ehlenmeyer side-arm flasks).
- Adapters available for 10mm and 12mm tubes.
- Optional printer
- Easy to clean.
The CO8000 gives a lifetime of stable and repeatable results for a very affordable price!
|
|
Features:
1. The 2.4" width colorful screen and portable design
2. Three kinds of light sources for selection,SCI and SCE mode switch and metamerism analysis for different working status
3. Tolerance setting, humanizational auto-judge color difference values and color deviation for judging the color easily
4. Professional color analysis software for doing the color data analysis and color difference diagrammatic outputting
5. The optical mini printer fulfil the output of data
|
|
The system CIELAB Color Checker PR0086 is an on-line color-measuring system, adjusted to an high absolute color accuracy.
A color adjustment by means of an absolute calibrated reference spectrometer is carried out in factory.
The absolute accuracy in average is ~1.6 dE. The relative accuracy also between the systems is less than +/-0.5 dE.
|
|
|
|
|
|
More powerful and more versatile than ever from the famous Chroma-Meter series
The new Chroma-Meter CR-400 supersedes the internationally recognised and acclaimed series CR-100, CR-200 and CR-300. It offers a huge number of added value features and improved versatility, while fully maintaining all optical properties and therefore, guaranties full data compatibility with the previous series. The CR-400, with its 8mm measuring area is suitable for measuring reflected colour and colour difference in a wide range of industrial fields. It is able to meet the needs of various applications, from all sorts of ingredients, foods, raw materials and finished products to pharmaceuticals and dermatological applications - the CR-400 handles all!
The main improvements focus on enhanced usability and functionality such as the re-designed Data Processor, featuring a large back light display for numerical or graphic display of measurement data and a built in thermal high speed printer. The data memory can now store up to 100 target colours and 1000 measurements. Several new colour spaces and Pass/Fail formulas as well as indices for whiteness and yellowness enhance the usage into various fields of applications. The new "user indices" function allows the input of up to six different user or application specific equations using XYZ, Yxy or CIELAB values. Furthermore, the communication languages can be set for English, German, French, Italian, Spanish and Japanese.
|
|
Colour Comparison Cabinet MATCHMASTER 425 MC
Microprocessor controlled colour comparison cabinet. Automatic operation based on manually preset programme sequences. 3 types of illuminants: A, D65 and TL84. Facility for adding UV light to clarify response to the fluorescent effect. Control panel with foil pad keyboard and LCD. Display of operating hours and number of switching cycles for each light source. Accessories: Pivoting specimen table, light diffusor.
|
|
Product Features:
- X-Rite's patented seven-phosphor fluorescent daylight technology renders color more accurately.
- With five different light sources-daylight (D50), cool white, fluorescent (TL84), incandescent home lighting and ultraviolet, Judge II - S gives you the ability to detect metamerism (colors that match under one light, but not another).
- Ultraviolet source can be used by itself or in combination with any of the light sources for detecting and evaluating optical brighteners, whitening agents or fluorescent dyes and pigments.
- Meets or exceeds major international standards for visual color evaluation including: ASTM D1729, ISO3664, DIN, ANSI and BSI.
- Elapsed time meter for tracking optimal lamp replacement.
- Judge II - S is a stationary steel booth ideal that easily fits into a variety of workspaces, including offices, design studios and production areas.
|
|
|
|
|
|
Why Use Color Indexes?
Color Indexes are designed to save time and cut costs by providing the user with only information pertinent to their application. An index simplifies color readings by presenting the user with one number to base a decision on instead of a multitude of data to sort through. Color indexes also replace visual standards used in various applications and therefore taking the subjectivity out of the people doing the observing; Thus providing an instantaneous evaluation of the sample that is accurate measurement after measurement.
Konica Minolta Sensing Americas has pioneered the development of our proprietary Color Indexing Technology or CIT into full turnkey solutions for a number of industries.
What is a CR-410FF?
The CR-410FF is a precise colorimeter that can be used to measure the color of cooked French Fries. Currently, cooked fries are either evaluated visually for color or they are measured by a bulky & expensive instrument. The CR-410F can be used to measure the color of fried potatoes and will display a number, an index value, calculated to correlate to industry standard measurements. The CR-410FF series instrument is based on Konica Minolta's CR-400 instrument technology, a highly accurate and reliable platform that has been in service to the food industry for over 20 years. Additionally the CR-410FF features our proprietary Food Color Indexing Technology or FCIT.
|
|
|
|
|
|
Why Use Color Indexes?
Color Indexes are designed to save time and cut costs by providing the user with only information pertinent to their application. An index simplifies color readings by presenting the user with one number to base a decision on instead of a multitude of data to sort through. Color indexes also replace visual standards used in various applications and therefore taking the subjectivity out of the people doing the observing; Thus providing an instantaneous evaluation of the sample that is accurate measurement after measurement.
Konica Minolta Sensing Americas has pioneered the development of our proprietary Color Indexing Technology or CIT into full turnkey solutions for a number of industries.
What is a CR-410PB?
The is a specialty unit designed specifically for the peanut butter industry. Currently the measurement of peanut butter color is evaluated visually against established USDA standards. The CR-410PB will display a number, an index value, calculated to correlate to USDA standards such as Grade A or Grade B and can also accurately measure whole roasted peanuts. The CR-410PB series instrument is based on Konica Minolta's CR-400 instrument technology, a highly accurate and reliable platform that has been in service to the food industry for over 20 years. Additionally the features our proprietary Food Color Indexing Technology or FCIT.
|
|
|
|
|
|
Why Use Color Indexes?
Color Indexes are designed to save time and cut costs by providing the user with only information pertinent to their application. An index simplifies color readings by presenting the user with one number to base a decision on instead of a multitude of data to sort through. Color indexes also replace visual standards used in various applications and therefore taking the subjectivity out of the people doing the observing; Thus providing an instantaneous evaluation of the sample that is accurate measurement after measurement. Konica Minolta Sensing Americas has pioneered the development of our proprietary Color Indexing Technology or CIT into full turnkey solutions for a number of industries.
What is a CR-410C?
The CR-410C is a specialty unit designed specifically for roasting of whole bean coffee. Currently the measurement of roasted coffee is either evaluated visually for color or are measured by a bulky & expensive instrument. The CR-410C will display a number, an index value, calculated to correlate to industry standard measurements such as those by Specialty Coffee Association of America or SCAA. The CR-410C series instrument is based on Konica Minolta's CR-400 instrument technology, a highly accurate and reliable platform that has been in service to the food industry for over 20 years. Additionally the CR-410C features our proprietary Food Color Indexing Technology or FCIT.
|
|
|
|
|
|
Why Use Color Indexes?
Color Indexes are designed to save time and cut costs by providing the user with only information pertinent to their application. An index simplifies color readings by presenting the user with one number to base a decision on instead of a multitude of data to sort through. Color indexes also replace visual standards used in various applications and therefore taking the subjectivity out of the people doing the observing; Thus providing an instantaneous evaluation of the sample that is accurate measurement after measurement.
Konica Minolta Sensing Americas has pioneered the development of our proprietary Color Indexing Technology or CIT into full turnkey solutions for a number of industries.
What is a CR-410T?
The CR-410T is a portable colorimeter, approved in December 2008, by the USDA, to measure and grade the color of processed tomato products. The CR-410T contains the specific indices formulas, needed to generate a score or grade for tomato sauce, tomato paste, tomato juice and tomato ketchup. The CR-410T features our proprietary Food Color Indexing Technology or FCIT.
|
|
FUELVIEW PROCESS COLORIMETER (RED DYE MONITOR)
Measure red dye concentration color and haze simultaneously, continuously and completely on-line!
Application
The 42015-FV FuelView Analyzer continuously measures the red dye concentration of dyed commercial fuels, simultaneously with color and haze, either in a side-stream or directly in the pipeline.
|
|
The FP8800 Flame Photometer is used for simple, precise and inexpensive measurement of concentration of alkaline elements in aqueous solutions for analytical applications in process and laboratory. It was developed especially for industrial applications. It features a PROFIBUS DP and two Ethernet interfaces for computer-aided process control (SPC). Two USB-ports are intended for data export (e.g. in .csv format) or firmware update via USB flash drive. The FP8800 features the use of propane or butane as a
fuel gas which allows flame-photometric measuring up to three elements simultaneously. In addition purified and dried air is required. Measurements can be performed either with or without internal standards. Standard solutions are used for calibration, while control solutions are used to verify results. All samples, controls and standards are presented
manually. The device can be customized flexibly to users´ requests.
|
|
|
|
|
|
Jenway is the world leader in Flame Photometer production, with our simple, easy-to-use models found in many thousands of laboratories all round the globe. This interference free method of measuring Sodium (Na), Potassium (K), Calcium (Ca), Lithium (Li) and Barium (Ba) is common in the food processing and feed industries, for agricultural, dairy and wine analysis, in chemical and petrochemical processing, in the drinks industry, in environmental and water analysis, cement, mineral and ore processing and many more… A key area of application is in the clinical laboratory where flame photometers have traditionally been used for the measurement of electrolytes in serum, plasma, urine and other body fluids.
The Models PFP7 and PFP7/C are low temperature, single channel flame photometers designed for the routine determinations of Na & K (Ca, Ba and Li optional). With in-built automatic flame failure detection for user safety these products can be used with Propane, butane, LPG or natural gas, an optional compressor is also available where a clean air supply is not available.
The Model PFP7/C is specifically designed for use in clinical applications. The in-built lineariser circuitry enables readings of both Na and K at the normal clinical serum concentrations to be displayed directly in mmol/l. Serum samples must be diluted prior to presentation to the flame photometer. The Series 7 diluter is available to enable this to be carried out efficiently and accurately.
|
|
CL 22D & 26D
Dual Channel Flame Photometers
Salient Features & Benefits
- Dual Channel.
- Concentric non-corrosible Nebulizer.
- Mixing Chamber designed for stable flame.
- Flame System: Stainless Steel round Burner with LPG as Fuel and Air as Oxidant.
- Narrow band Interference Filters.
- Small quantity of sample needed.
|
|
Gloss Meter PICOGLOSS 562 MC
The two-angle gloss meter with the measuring geometries 20°/60° is one of the smallest portable gloss measuring instruments which have ever been designed. The measuring geometries 20°/60° and the automatic change-over of mirror-gloss meet the requirements of the mostly used gloss ranges i. e. high and medium gloss. The PICOGLOSS 562 MC is provided with an automatic calibration as well as extremely long-life LEDs as light sources and a USB interface. The instrument is operated by two round cells the capacity of which is sufficient for at least 10,000 measurements.
Measuring ranges 20° mode:
0 - 150 and 150 - 1999 GU, respectively.
Measuring ranges 60° mode:
0 -150 and 150 -1000 GU, respectively
|
|
|
Small, portable gloss measuring device with universal 60° measuring geometry and mirror-gloss switch-over. The PicoGloss 560 requires only one calibration standard for calibration. LC display for convenient display of measuring and calibration values and further messages. An USB port is available for data transfer to a PC. Free download of PC software. The Picogloss operates on a micro battery for up to 10,000 measurements (in PC mode via USB port). The PicoGloss 560 MC comes in a carrying case including a high-gloss standard, micro battery, USB cable, lens cloth, and operating instructions.
|
|
Multigloss 268
The Multigloss 268 is an ultra compact portable Gloss Meter with three measuring angles in full accordance with ISO, ASTM, DIN, BS and JIS norms. With only two operation keys, all functions such as language settings, calibration, measurement and statistics can be performed. With the three angles 20°, 60° and 85° all kind of glossy surfaces, from mat to high gloss, can be measured. For perfect production control up to 999 measurements are stored and used for statistical calculations.
|
|
|
Small portable meters to measure gloss at 20, 60 and 85 degrees. Ideal for a variety of applications including paints, plastics, films, furniture, and auto parts
|
|
|
The sensors of RLS-GD series are used for online measurement of gloss degree. In the production of plastic sheets (design sheets, wall coverings, floor coverings, table coatings, foam sheets, and coated carrier materials for the furniture industry, automobile industry, fashion industry, or construction industry) and ceramic parts (ceramic tiles and plates for wall and floor) 100% quality inspection of the optically visible surface has become an ever more frequent requirement.'
|
|
|
The Multigloss 268 is an ultra compact portable Gloss Meter with three measuring angles in full accordance with ISO, ASTM, DIN, BS and JIS norms. With only two operation keys, all functions such as language settings, calibration, measurement and statistics can be performed. With the three angles 20°, 60° and 85° all kind of glossy surfaces, from mat to high gloss, can be measured. For perfect production control up to 999 measurements are stored and used for statistical calculations.
|
|
|
|
|
|
The first micro-gloss became the industry standard in gloss measurement. The new micro-gloss combines the well known ease-of-use and protected calibration in the holder with a new and unique functionality - designed for today`s QC standards.
the micro-gloss is always ready, including calibration holder. Small as a digital camera - it is safe in your hand. Thanks to a well structured menu and a new scroll wheel the operation is easier than ever before.
The calibration standard is always protected and exactly positioned in the holder. New: the intelligent auto diagnosis tells you when to calibrate and even checks whether the standard is clean. Operator friendly. Safe.
With the new micro-gloss you can measure any material - paints, plastics or highly reflective metals.
Its new expanded measurement range of up to 2000 gloss units guarantees always reliable results - according to international standards.
The long-term stable light source and patented illumination control provide superior accuracy for many years. Lamp changes will no longer be needed. We even give you a
10 year guarantee on the lamp life.
|
|
|
Konica Minolta offers a wide range of laboratory spectrophotometers for various applications such as Plastics, Paints, Textile and Paper with superior inter-instrument agreement, highest reliability and with horizontal and vertical positioning. Together with software for QC and Colour match prediction we can offer you a total solution
|
|
|
The COLORTEST II illuminates the sample with monochromatic light from a semi-conductor source. A photo-receiver measures the amount of light reflected by the sample. The mean value of a whole series of measurements is calculated and displayed by electronic circuitry.
|
|
|
|
|
|
The model 68-50 Brightness & Color Meter makes measurement of brightness, color and opacity affordable in Production and QC applications. The Brightness & Color Meter measures color, color purity, degree of yellowness, degree of whiteness, color matching and color fastness. The TMI Brightness and Color Meter operates in accordance with CIE Publication No. 15.2 “Standard of Colourimetry” and was designed to meet ISO, ASTM, TAPPI and other International Standards.
APPLICATIONS
Applications of the instrument include paper, pulp, packaging, nonwoven, textile dyeing and printing, color printing, construction materials and ceramics, chemicals, paints, medicines, food, recycled pulp products and mineral industries.
FEATURES
* Large alpha-numeric display
* Single-button simplicity of operation
* RS-232 data output
* Stores up to 99 readings; auto-calculates mean value
* Built-in Printer
SPECIFICATIONS
* CIE 1931 (2 degrees)
* CIE 1964 (10 degrees)
* ISO 2469, 2470, 2471
* ISO 5631.1
* ISO 9416
* Tristimulus values: <1.00
* Chromaticity coordinates: <0.0100
* Xenon lamp provides diffused illumination in 30mm window in 150mm dia integrating sphere
* Illumination observation condition: Illumination d/o according to ISO 2469 is adopted, i.e. integrating sphere (150mm in diameter)diffused illumination on sample with vertical reception.
* Color measurement standard: Tristimulus values, CIE 1964/10°and CIE 1931/2°standard observer.
* Light source for colour measurement: Pulsed xenon lamp to simulate illuminant D65 and C, instantaneous illumination on sample with UV regulator.
* Measurement port: 30mm in diameter.
|
|
Biochrom Libra S2 Colorimeter
Compact, portable instrument designed for demanding environments or remote locations. The rugged design is ideal for field or student use.
- Excellent value for money and ideal in educational applications.
- Absorbance, %Transmission and simple kinetic measurements.
- 8 built in filters to measure from 440nm to 680nm.
- Easy to use
- Rechargeable battery option (Libra S2B)
- Connect to PC or chart recorder.
- Rugged, Portable and easy to use
|
|
CL 223
- Patented Solid State LED Based.
- Long life LED light source.
- Auto zero facility.
CL 63
- Filter Based.
- Long life Photo Diode Detector.
- Automatic Reference adjustment.
- Immune to ambient light variations.
|
|
Measure up to 45 parameters
HI 83200 2008 Series is a multiparameter bench colorimeter dedicated for laboratory analysis. It can measure up to 45 methods using specific liquid or powder reagents. The amount of reagent is precisely dosed to ensure maximum
repeatability.
HI 83200 2008 Series bench colorimeter can be connected to a PC via a USB cable. Its software companion is the HI 92000 HANNA Windows® Compatible Software that helps the user to manage all the data.
HI 83200 2008 Series, like other instruments in this series, runs for hours on rechargeable batteries. It can also operate using a 12 VDC power supply.
The meter can be zeroed in seconds and the reagents cost much less than what you have been paying. All this and much
more at a fraction of the cost of expensive and complex spectrophotometers!
All meters use an exclusive positive locking system to ensure that the cuvet is in the same position every time it is placed into the measurement cell.
|
|
|
NEW CS-200 Chroma Meter to measure luminance, chromaticity, gamma and contrast of light emitting products, such as large flat panel and plasma displays, compact LCD's and OLED's, outdoor screens, high pressure lamps and instrument panels. CS-200 has 40 high accuracy sensors to calculate spectral response; 3 selectable measuring angles; measurement speed as low as 0.5 seconds. Performance comparable to many spectroradiometers on the market today.
|
|
|
|
Photometers, Colorimeters
