|
|
| Products 121 to 150 of 208 |
Allen-Bradley graphic terminals from Rockwell Automation offer rugged electronic interface solutions in a variety of sizes and configurations. These robust devices are fully packaged (hardware, software, and communications) and tested for HMI (human machine interface) operation. Simply download your configured application file, set appropriate communication parameters, and connect the communication cable.
PanelView Plus CE terminals are optimized for machine level interface, providing tight integration with the control system. They replace traditional wired panels as the input and output mechanism for operator interaction machines. Choose from a stand-alone single system to a multi-layer, enterprise-wide solution. These terminals are capable of providing process information over a variety of communication protocols including DeviceNet, ControlNet, EtherNet/IP, DH+, DH-485, Remote I/O, DF1, and other third party vendor networks.
|
|
OPERATOR TERMINAL
''Reliable operator interface and easy to use.''
Industrial workstations to human-machine interface (HMI), embedded board based on microprocessor. Are particularly suited for intensive work, in a very easy way.
|
|
Operator Terminal OT115 series
* Display: 4.2"-STN bluemode display with 240 x 64 pixels
* Processor: 72 MHz 32 bit
* Operating memory: 64 kB internal
* Operating system: VxWorks®
* Interfaces: RS232/422
* Projecting: M-JVIS Designer
|
|
|
|
|
|
Operating and displaying with b maXX HMI
14 operating and display devices are available to the user in the b maXX HMI and b maXX IPC product ranges, from text-oriented control terminals to TFT touch panels.
The b maXX HMI range has been specially designed for special automation requirements. The range covers control and display equipment requirements from the b maXX HMI 10 text-oriented terminal to Touch TFTs such as the b maXX HMI 155T. Baumüller operating and display tools allow the machine to be adapted to any production process.
User orientation and operator convenience are characteristic of Baumüller operating and display products. All terminals in the HMI series are programmed using the same programming tool.
The compact design of the b maXX HMI provides the user with a comprehensive range of functions in a small space.
The b maXX HMI range includes a comprehensive array of operating terminals. The terminal versions range from the text-oriented b maXX HMI 10 and 20 to the b maXX HMI 30 and b maXX HMI 35K graphics/text terminals, the graphics terminals b maXX HMI 65K to 105K and the touch displays, b maXX HMI 45T to 155T.
The web functionality of the b maXX HMI product range makes it possible for machines to have remote diagnosis and remote maintenance via a LAN/WAN connection.
|
|
IndraControl VCP devices – Bosch Rexroth's compact operator terminals are flexible, user-friendly and offer complete freedom. They provide flexibility in their hardware, user-friendliness in their operation and freedom to select the interfaces and functionality you need.
The combination of hardware and software offers the customer a complete, capable package with an economical system display.
The IndraControl VCP controller-based operator terminals can be connected to the following industry-proven Rexroth control systems: SYNAX and VisualMotion.
* inexpensive access for operation and observation
* compact size
* easy projection of system visualization
* extensive functions the visualization software VI-Composer
* supports Asian characters
|
|
Beijer Electronics H-series H-T70t, touchscreen panel with TFT-color 7" colour widescreen display
Display: Graphic 64K color TFT-LCD, resistive touch
Presentation form: 7" (diagonal), 800 x 480 pxl
Keypad: 1 Meny key and 6 user-defined function keys
2 USB Hosts, 1 USB Device and a built in CF-card slot
The H-series offers valuable HMI functionality at an affordable level. The series include keypad and touch screen interfaces and is available in seven different sizes from 3 to 10.4 inches. Offering three levels of functionality – Standard, Plus and Network – the H-series enables you to select and pay for what level of HMI technology you need.
|
|
|
|
|
|
PREMIUM
The product segment “PREMIUM” offers powerful operator panels that are used in almost all production processes. Typical applications are machine visualization on site with networking to a guidance system, or production processes that require convincing user interfaces.
Equipped with a keypad or touch screen data entry option, there are more than 35 panels available with display sizes ranging between 3 to 21 inches in two product groups. A selection that offers the right model for almost any application.
WOP-iT Series
The WOP-iT product group has a multitude of powerful user functions. With the help of the client server technology, it is possible to install a simple and flexible network from the PLC to the main frame via the panel without additional hardware. Communication is bidirectional – panel and server PC independently synchronize themselves according to the data entry.
With the WOP-iT Designer, it is possible to handle general project planning via the entire panel family. Users can configure a graphic user interface from comprehensive object libraries rapidly and effortlessly. With the help of numerous additional functions such as comparative arithmetic, Boolean algebra, string processing and user administration, the project planning
expenses are considerably reduced. The easy language setting
feature completes the functional scope.
|
|
|
|
|
|
Operator panel BASIC
Operator panels in the product segment “BASIC” are used wherever essential operator functionalities are required. Customers only pay for the features that they need for their applications. With an ideal price/performance ratio, these products help reduce the costs for machine operation, in serial machines, for example. The graphic operator panels demonstrate their strengths for smaller and medium-sized applications,
such as mobile packers, industrial washing machines and baking ovens, die casting systems, automated soldering machines and other small machines.
LHT Series
The LHT product series includes panel units with keypads and touch screen entry in six different sizes between 3 to 10.4 inch display size. The versatile panels are brought to life with the help of the H-Designer, an intuitively used project planning tool with a broad functional scope. Thanks to flexible help programs that facilitate project creation in just a few minutes, the H-Designer is the perfect tool for simple to intermediate applications.
A large number of communications drivers makes it possible to easily connect up almost any conventional control system. Currently, there are more than 100 different driver protocols for PLC’s, frequency converters and servo controllers available.
|
|
|
|
|
|
Operator Panel LXT
The product segment “PREMIUM” offers powerful operator panels that are used in almost all production processes. Typical applications are machine visualization on site with networking to a guidance system, or production processes that require convincing user interfaces. Equipped with a keypad or touch screen data entry option, there are more than 35 panels available with display sizes ranging between 3 to 21 inches in two product groups. A selection that offers the right model for almost any application.
LXT Series
The LXT Series product group comes into use when intuitive operation and ergonomic design is requested. From pure installations to food production to even transport equipment, packaging plants or water treatment and offshore applications, these compact panels can do their job anywhere.
With the Information Designer, you can quickly and efficiently create impressive user interfaces for the entire LXT series. Finished masks and graphic objects are integrated into the interface through simple drag and drop. The Designer also creates detailed documentation. This means that accompanying project documents are quickly prepared for the machine description.
For you, PREMIUM means: A multitude of operator panels, equipped with extensive functionalities, as a comprehensive HMI solution for your special visualization tasks.
|
|
|
|
|
|
Operator terminals
TERMEX is an intrinsically safe operator panel family for hazardous areas
The text terminals TERMEX 220 and TERMEX 320 with a monochrome display (4 lines, each with 20 characters) are used for operator guidance, the presentation of measured values and message displays on systems of low complexity.
The monochrome graphics terminals TERMEX 230 and TERMEX 330 are used on systems with increased requirements in terms of presentation and operation. The graphics terminals have a single resolution of 240 x 128 pixels (maximum 14 lines, each with 40 characters) and permit a more ergonomic presentation of the operating pages by means of different font sizes and embedded graphics.
The intrinsically safe TERMEX terminals are connected to the respective PLC via the power supply unit in the safe area. Various interfaces are available for the transfer of data from and to the PLC.
The TERMEX terminals are available with ATEX approvals for Zones 1 and 2 (to category II 2 G) and Zone 22 (to category II 3 D).
TERMEX has also an FM-approval for the use in North America. The approval is in accordance with IS CL I, DIV 1, GP A, B, C, D.
|
|
|
|
|
|
CIMO - monitor operator panels
There is a wide range of CIMO monitor operator panels
to suit every task and every budget.
CIMO monitor operator panel with LCD "TFT display"
Extremely slim design, outstanding colour brilliance,
excellent reading angle, front panel membrane-protected
against chemicals, new ergonomic design -
just a few of the impressive features of this top
product from Wöhrle.
CIMO operator panel with Windows CE - the latest
generation
This particularly high-quality range is the result of
the latest Wöhrle development and closes the gap
between text-oriented computer terminals and traditional
industrial PCs. The operating system is
Microsoft Windows CE. This means that it is possible
to operate all standard applications and utilise the
advantages of this platform, such as the Internet
facility.
TFT LC displays are provided for the operating panels
of the future, providing high resolution and excellent
colour.
These ultra-compact operator panels are setting the
standard.
CIMO operator panel is the economical version
An easy-to-use membrane keyboard and a graphic
black and white LC display make sure that control
and monitoring is cost-effective. A particularly economical
solution.
CIMO monitor operator panel with CRT
This range of equipment with monochrome cathode
ray tubes provides the most innovative and economical
solutions in the field of operating and monitoring
plant and machinery. Protected at the front to IP 65
they also withstand harsh environments.
|
|
unipo® control panel UCP 5
The individually configurable small control panel
UCP5 is the most variable visualisation solution for text- and graphic-displays in industrial applications, for diagnostic and analyser purposes as well as within building automation.
Its modular construct, the intuitively operated projecting software UCPTool® and the industrial quality (IP65 protected) make UCP5 the first choice for new projects and for replacement. UCP5 substitutes a large assortment of plaintext displays and so grants the continuous availability of your plants!
|
|
|
Character HMI family with 2, 4 or 8 lines of text. 12-24Vdc supply, dual communications ports (CX models), 3rd party communications drivers. Common software for all units. IP65.
|
|
|
Industrial RS232/RS422 character based terminals with alpha/numeric keypad input. Very low cost ( priced as low as $205) and very dependable. Many different models to choose from !!
|
|
|
|
|
|
Operator Display/Control Station
Control Station Overview
Kar-Tech's Operator Control Station puts all the critical machine information that a user needs in front of him in a single, central location. The Control Station can be used for as little as textual or graphical diagnostic information (valve pressures, hours, etc.), or it can be used for local machine control or calibration of machine settings, and integrated with GPS, radio control, remote diagnostics and any other Kar-Tech technology. It's a sealed, solid, all-in-one solution that looks sharp, offers state-of-the-art technology, and is built to last.
At A Glance:
- Display/Diagnostics: Ideal for a simple operator display station. View hours, pressures, voltages, etc.
- Command/Control: Can be used to reduce cost - upgrade away from switches and meters.
- Built To Last: Enclosure and all switches and buttons are sealed to IP-67.
- Sunlight-readable Display: EASY to read, even in bright, direct sunlight!
Basic Technical Info:
Kar-Tech Control Stations operate between a range of +9 to 40VDC, and are protected for voltage spikes and reverse battery connection. The number and type of inputs and outputs vary by application.
Typical Applications:
- Machine Diagnostics
- Industrial HMI
- Complex Machine Control
- CANbus/Engine Display
Kar-Tech Control Stations have been used successfully in multiple different market sectors.
Available Options
- Integrated radio receiver
- Integrated cellular comms. for remote diagnostics
- Integrated GPS for asset monitoring/tracking
|
|
Colors for your data
Industrial Operator Panel (HMI) with 7.5" touchscreen color TFT display
64K colors TFT display
VGA (640x480 pixels) resolution
Resistive touchscreen
Connection to industrial bus systems and Ethernet (requires plug-in modules)
32 MB internal Flash memory
32 MB on removable media (option)
SSFDC memory card
IP65 front panel protection
Programmable with "Designer" software tool (option)
|
|
Beijer Electronics H-series H-T60b, touchscreen panels with mono/color STN LCD 5.7” display
Display: Mono STN LCD
Presentation form: 5.7” (diagonal), 320 x 240 pxl
Keypad: 1 Meny key and 5 user-defined function keys
The H-series offers valuable HMI functionality at an affordable level. The series include keypad and touch screen interfaces and is available in seven different sizes from 3 to 10.4 inches. Offering three levels of functionality – Standard, Plus and Network – the H-series enables you to select and pay for what level of HMI technology you need.
|
|
|
|
|
|
Hardware
VGA 640x480 pixels, lighted, TFT colour graphics LCD display 10.4". (An enhanced TFT display is available as an option).
Resistive touch screen.
Optional PS/2 keyboard / keypad interface.
Ethernet options available. Supports TCP/IP, ModbusTM and other protocols.
4 Mbytes of flash memory and 16 Mbytes RAM.
EIA-232, -422 or -485 serial interface. Additional serial ports available.
RISC 92 MHz MIPS R3000 processor.
The terminal is industrially hardened to operate in rugged environments and meets NEMA-4 specifications for washing, ice and salt spray.
Modular form factor also available.
Software/Firmware·
QlarityTM - Object-based programming language makes application design easy for non-programmers whilst also having the capability of highly complex applications.
Design with pre-defined objects, edit current objects or design new objects for your application
Windows® programming environment - Qlarity Foundry is available for free.
Support for select partner hardware (distributed/remote I/O, motion control).
Keys around the display can be customised and your logo can be added to the legend. Custom hardware, firmware and software options are also available.
Contact us for a free trial demonstration terminal.
|
|
|
|
|
|
NEW RED LION G306A OPERATOR INTERFACE PANEL FEATURES ADVANCED TFT DISPLAY FOR CRISP IMAGES, EXCELLENT READABILITY
The 5.7" 256 color QVGA 320x240 pixel LCD display also offers three front-panel LED indicators, and a five-button keypad for on-screen menus. In addition, as with all G3 panels, the G306A arrives standard with an Ethernet port, USB programming port, support for up to five high-speed serial ports, integrated protocol converter, built-in web server, standard CompactFlash socket and IT-ready data logging.
The G306A is both robust and simple to operate. Users can easily enter data on the G306A through the resistive analog touchscreen or front panel keypad. Plus, this model comes with an increased onboard flash memory of 8 MB, and it can be configured using Red Lion’s free Crimson Programming Software. With these exceptional features, the G306A is ideal for collecting and displaying data or interfacing with a variety of devices, including PLCs, PCs, drives, PID controllers and others, all while offering exceptional visual properties.
The Red Lion G3 series offers the most powerful communications platform available today, providing a cost-effective solution for protocol conversion, remote system control and monitoring, as well as historical data logging. By utilizing innovative technology to display sharp, high-quality images and easy-to-read data, the G306A delivers a superior HMI solution.
- Configured using Crimson 2.0 Software (FREE)
- Up to 5 RS-232/422/485 Serial ports
- 10 Base T/100 Base-TX Ethernet Port
- Remote Web Access and Control Facility
- UL Listed for use in Hazardous Locations
- IP66
|
|
|
|
|
|
CIMO - monitor operator panels
There is a wide range of CIMO monitor operator panels
to suit every task and every budget.
CIMO monitor operator panel with LCD "TFT display"
Extremely slim design, outstanding colour brilliance,
excellent reading angle, front panel membrane-protected
against chemicals, new ergonomic design -
just a few of the impressive features of this top
product from Wöhrle.
CIMO operator panel with Windows CE - the latest
generation
This particularly high-quality range is the result of
the latest Wöhrle development and closes the gap
between text-oriented computer terminals and traditional
industrial PCs. The operating system is
Microsoft Windows CE. This means that it is possible
to operate all standard applications and utilise the
advantages of this platform, such as the Internet
facility.
TFT LC displays are provided for the operating panels
of the future, providing high resolution and excellent
colour.
These ultra-compact operator panels are setting the
standard.
CIMO operator panel is the economical version
An easy-to-use membrane keyboard and a graphic
black and white LC display make sure that control
and monitoring is cost-effective. A particularly economical
solution.
CIMO monitor operator panel with CRT
This range of equipment with monochrome cathode
ray tubes provides the most innovative and economical
solutions in the field of operating and monitoring
plant and machinery. Protected at the front to IP 65
they also withstand harsh environments.a
|
|
The 10/510i WinLink version is the optimum solution for a Windows environment integrated with the CNC operator panel. It has standard hardware architecture based on the Pentium microprocessor, with hard disk, floppy disk and an integrated Mouse Pad. It has dynamic RAM memory expandable up to 128Mbyte, an integrated Ethernet communication interface, a 12" TFT colour screen and a powerful DLL library to interface with all the CNC functions. All of this enables development through " Object oriented " languages such as Visual Basic and Visual C++, and the SCADA graphic tool which can be customised to the required application specification.
To complete the WinLink's 13 keys functionality is the "yellow key ", this is used to switch monitor and keyboard functions between the PC environment and the CNC environment.
|
|
• HMI600
HMI600 is the first operator panel developed and created by ASEM, it combines reliability and essentiality of the traditional operator panels to the high performance and flexibility of the PC based platforms.
With IP65 frontal grade protection and extreme resistance to vibration, HMI600 is appropriate for demanding industrial uses that require an excellent standard in mechanical and electrical design
Available in display sizes 6.5” to 12” and with resistive touch screen, due to its power of elaboration and functional software, it is positioned within the premium position of the market of operator panels.
|
|
VARIOVIEW CI - Control Interface
PC-based machine control for production and assembly machinery
* Visualization, control, and assessment of operating states and production data
* Job monitoring and control for production in specified batch sizes
* Type information and recipe data for multi-type production
* Definition of shift schedules for shift-relevant data evaluation
* Logging of process and fault alarms
* Data transfer to higher-level systems
|
|
Fagor Automation offers the widest and most complete range of products and provides a complete solution for governing all kinds of machine tools from the simplest to the state-of-the-art.
Fagor CNC systems as well as the servo drive systems, motors and accessories excel by their friendly, simple and intuitive operation.
|
|
PC panels
Description
Choose Magelis Compact iPC... Value your knowledge and save valuable time during installation.
Affordable design
Appropriate power: Celeron M 1.0 to 1.3 Ghz, Intel Pentium M 1,6 Ghz
Choice of access: embedded Ethernet TCP/IP, dual Ethernet network and/or wireless network, PCI or PCMCIA expansion cards
More compact for an easy installation
Added value
Open : Intel Pentium microprocessor, Microsoft Windows
Quality interface
Rugged : Hardened and UL 508, CSA certification
Combined offer
By combining Magelis Compact Ipc and Vijeo Look or Vijeo Designer, you can develop ypur supervisory applications more easily
|
|
In view of increasing requirements with regard to production conditions, the spectrum of the so-called man-machine interface grows further and its functions are increasing continuously. HMI devices as well as a compatible, consistent HMI software, i. e. a visualisation software, are basic components of the production lines and production sequences of today.
HMI devices and software by Lenze ensure that you can operate your machines and systems in a safe and simple manner, control processes, and adjust your data accurately.
|
|
|
The compact OP7200 eDisplay is an intelligent operator interface ideal for data acquisition and stand-alone systems such as factory floor controls.
|
|
In view of increasing requirements with regard to production conditions, the spectrum of the so-called man-machine interface grows further and its functions are increasing continuously. HMI devices as well as a compatible, consistent HMI software, i. e. a visualisation software, are basic components of the production lines and production sequences of today.
HMI devices and software by Lenze ensure that you can operate your machines and systems in a safe and simple manner, control processes, and adjust your data accurately.
|
|
|
|
|
|
M700 Series - Mitsubishi’s new flagship CNC controller line
The M700 series is Mitsubishi’s new flagship CNC controller line and it brings significant new dimensions of power and user-friendliness to CNC applications. The advanced nano technology of the M700 series is supported by a high-speed servo bus for world-class machine performance.
New CNC architecture for maximum processing speed
The power of the CNC M700 series is enhanced by a brand-new RISC CPU and high-performance ASICs.
Full nano control for maximum precision machining
Full nano control combined with the innovative SSS (Super Smooth Surface) and OMR (Optimum Machine Response) features enables the M700 series to deliver truly exceptional machining quality.
Simplified operation and drastically faster setup times
The new, user-friendly CNC display makes all operations easier, from initial setup to production. In addition to this the M700 series supports new functions for checking machining in 3D and visualising machine statuses for even easier operation.
|
|
|
|
|
|
M700 Series - Mitsubishi’s new flagship CNC controller line
The M700 series is Mitsubishi’s new flagship CNC controller line and it brings significant new dimensions of power and user-friendliness to CNC applications. The advanced nano technology of the M700 series is supported by a high-speed servo bus for world-class machine performance.
New CNC architecture for maximum processing speed
The power of the CNC M700 series is enhanced by a brand-new RISC CPU and high-performance ASICs.
Full nano control for maximum precision machining
Full nano control combined with the innovative SSS (Super Smooth Surface) and OMR (Optimum Machine Response) features enables the M700 series to deliver truly exceptional machining quality.
Simplified operation and drastically faster setup times
The new, user-friendly CNC display makes all operations easier, from initial setup to production. In addition to this the M700 series supports new functions for checking machining in 3D and visualising machine statuses for even easier operation.
|
|
|
|
Human machine interfaces, Dialogue terminals
