Thrust ball bearings, Roller thrust bearings

45 companies | 152 products
Filters
angular-contact thrust ball bearing / high-accuracy - ID : 35 - 200 mm | BTW series

Double direction angular contact thrust ball bearings are accurate for applications where space are limited and required smooth mounting, the high speed capability accommodate higher speed compared...

angular-contact thrust ball bearing / high-accuracy - ID : 60 - 180 mm | BTM series

Double direction angular contact thrust ball bearings were developed by SKF to axially locate machine tool spindles in both directions. In these applications, a high degree of system rigidity is...

{{productDetail[9172]}}
rigid thrust ball bearing - ID : 10 - 40 mm, OD : 30 - 90 mm | 51 series

The axial deep groove ball bearings are comprised of housing locating washers, shaft location washers, and ball and cage assemblies. As the bearings are not self-retaining,...

angular-contact thrust ball bearing - ø 18 - 400 mm | 2344, 2347 series

Double direction axial angular contact ball bearings are non self-retaining precision bearings with restricted...

cylindrical roller thrust bearing - ID : 15 - 50 mm, OD : 28 - 78 mm | 811, 812

Shcaeffler axial cylinder roller bearings are made up of axial roller, cage assemblies, shaft and housing locating washers. These bearing are well known in facilitating...

cylindrical roller thrust bearing - ID : 15 - 50 mm, OD : 28 - 78 mm | 811, 812

Axial pointer roller bearings are elements containing axial pointer roller and axial...

spherical roller thrust bearing - ID : 85 - 200 mm, OD : 150 - 400 mm

Axial spherical roller bearings are self-aligning, single-row roller bearings. They are made of a solid shaft and housing washers that have asymmetrical...

{{productDetail[169]}}
thrust ball bearing - OD : 127 - 404.4 mm (5 - 16

Optimum performance in high speed applications is provided by TVB type ball thrust bearings. Axial rigidity is provided...

thrust ball bearing - ø 228.6 - 1374.775 mm (9 - 54

Ball thrust bearings provide optimum performance in high-speed...

spherical roller thrust bearing - ø 110 - 850 mm (4.3307 - 33.4646

The Spherical Roller Thrust Bearings from Timken features a bearing configuration and manufacturing technology that results in low friction of bearing. To continue, the bearing...

cylindrical roller thrust bearing - ø 50.8 - 609.6 mm (2 - 24

Designed to operate under heavy loads at moderate speed, standard versions of type TS bearings can be operated at peripheral speeds of up to 3,000 feet per minute. Special design features are available for both the bearing and mounting, permitting even higher rotational speeds for this bearing...

cylindrical roller thrust bearing - ø 50.8 - 406.4 mm (2 - 16

The TPS category cylindrical push bearing is close to TP category, excluding the base washer is composed of two races, through the contacting features spherically earth. The TPS bearing is self-correcting to first wrong position....

{{productDetail[7626]}}
cylindrical roller thrust bearing - ø 50.8 - 406.4 mm (2 - 16

Single direction thrust ball bearings
SKF single direction thrust ball bearings consist of a shaft washer, a housing washer and a ball and cage thrust assembly. The bearings are separable so that mounting is simple as the washers and the ball and cage assembly...

cylindrical roller thrust bearing - ø 50.8 - 406.4 mm (2 - 16

These RE angular contact thrust ball bearings by SKF. Its strategic design complies suitably with the supporting and sustaining of...

cylindrical roller thrust bearing - ø 50.8 - 406.4 mm (2 - 16

SKF cylindrical roller thrust bearings have cylindrical rollers as the rolling element arranged in linear contact with the raceways. They have a high radial load capacity...

cylindrical roller thrust bearing - ø 50.8 - 406.4 mm (2 - 16

The Needle roller thrust bearings by SKF are used to hold large numbers of needle rollers. These bearings can handle heavy axial loads and...

cylindrical roller thrust bearing - ø 50.8 - 406.4 mm (2 - 16

Tapered roller thrust bearings use conical rollers guided by a back-face rib on the cone. These bearings are capable of taking high radial loads and also axial loads in one or two directions....

{{productDetail[5564]}}
thrust ball bearing - OD : 127 - 404.4 mm (5 - 16

The TIMKEN TVB type ball thrust bearings are designed to provide maximum performance in different high speed applications....

thrust ball bearing - ø 228.6 - 1371.6 mm (9 - 54

Type TVL ball thrust bearings provide exceptionally low friction, cool running and quiet operation at high speeds and also are less sensitive to misalignment. TVLs are designed for thrust loading, but will also accommodate some radial...

spherical roller thrust bearing - ø 110 - 850 mm (4.3307 - 33.4646

Type TSR spherical roller thrust bearings are designed to achieve a high thrust capacity with low friction and continuous roller alignment. This bearing type is ideal for operating conditions that experience heavy loads, difficulty in establishing or maintaining housing alignment, or shaft deflection.

Size range: 110 mm to 850 mm

(4.3307 in. to 33.4646...

roller thrust bearing - ø 50.8 - 609.6 mm (2 - 24

Designed to operate under heavy loads at moderate speed, standard versions of type TS bearings can be operated at peripheral speeds of up to 3,000 feet per minute. Special design features are available for both the bearing and mounting, permitting even higher rotational speeds for this bearing...

cylindrical roller thrust bearing - ø 50.8 - 406.4 mm (2 - 16

The TPS type cylindrical thrust bearing aligning washer. The TPS has been designed to operate in construction wheeled equipment, drilling equipment, lifting equipment...

{{productDetail[4918]}}
polymer thrust ball bearing - ø 10 - 20 mm | xiros® B180

The xiros® B180 by Igus is a lightweight ball bearing material that provides an intense media...

{{productDetail[4740]}}
{{productDetail[32592]}}
needle thrust bearing - RoHS

NSK Ltd has come up with an absolutely compact, ultra-light and durable lipped thrust needle roller bearing, useful for automatic transmissions. Though the use of low viscosity transmission oil is widely used to enhance transmission...

needle thrust bearing - RoHS

The Thrust Ball Bearing Products from NSK are manufactured out of a bearing ring with a "washer-like" design, as well as some ball grooves which resemble "raceways". They are developed to be able to operate...

needle thrust bearing - RoHS

These NSK Thrust Ball Bearings are available for purchase in two different designs....

angular-contact thrust ball bearing - TAC-HR, SHR series

The TAC-SHR SERIES are specifically outlined to provide ball screw support for applications...

angular-contact thrust ball bearing - TAC-HR, SHR series

The NSK'S SEALED ACTBB are designed and developed mainly for ball screw support.

It provides high axial rigidity with its 60° contact angle optimized design. Encased...

{{productDetail[233]}}
angular-contact thrust ball bearing - TAC-HR, SHR series

Ball thrust bearings
SNR has developed a complete range of high quality ball thrust bearings. Thrust bearings...

angular-contact thrust ball bearing - TAC-HR, SHR series

Spherical roller thrust bearings
To meet the most precise specifications, SNR proposes a permanently optimised spherical roller bearing range, providing even higher robustness.

Of small...

thrust ball bearing - AXK

The thrust needle or roller bearing is designed to support very high purely axial loads and to give the assembly maximum rigidity.
The...

{{productDetail[8884]}}
thrust ball bearing - AXK

The former is capable of accommodating axial load in one course, whereas the later is capable of accommodating it in both courses. Neither is appropriate for functions that entail high-velocity rotation or...

roller thrust bearing - ø 10 - 130 mm (0.3937 - 5.118

Koyo's customized and extensive selection of track rollers come in various dimensional sizes. The Yoke track roller models, for example, may come in sizes which vary from 0.4 to 11.8-inch sizes, while the Stud model of track rollers, on the other...

needle thrust bearing - ø 5 - 240 mm (0.1969 - 9.4488

Thrust bearings, assemblies and washers are used for automatic and manual transmissions, automotive accessories as in compressors and steering gears, and various agricultural, industrial...

{{productDetail[19004]}}
{{productDetail[26649]}}
needle thrust bearing - ø 5 - 240 mm (0.1969 - 9.4488

The Rollway Thrust Ball Bearings are unmounted ball bearings manufactured by Emerson. The Rollway Thrust Ball Bearings comprises of a single-acting thrust ball and...

cylindrical roller thrust bearing - 25.4 - 558.8 mm | ROLLWAY®

ROLLWAY® Tandem Thrust bearings are also known as multi-stage thrust bearings. Tandem Thrust bearings are comprised of stages which include precision...

cylindrical roller thrust bearing - 25.4 - 457 mm | ROLLWAY®

The ROLLWAY® Cylindrical Thrust bearings which uses crowned cylindrical rolling elements that are divided by a brass roller riding retainer...

spherical roller thrust bearing - Rollway®

EMERSON Rollway spherical roller thrust bearings are designed for high axial load carrying capacity, and can accommodate radial loads up to a maximum...

flaring roller thrust bearing - 4

Emerson's new Rollway® is a tapered thrust bearing with bore diameter sizes, ranging from 4 inches all the way to 17 inches. This bearing is available in three...

{{productDetail[15945]}}
{{productDetail[8109]}}
thrust ball bearing - ID : 0.25 - 1.31

The 500 Series, manufactured by RBC, is a single row underground combination radial and thrust...

thrust ball bearing - ID : 0.25 - 1.5

The 600 Series™ is a range of thrust ball bearings from RBC that is suitable for moderate speeds and medium thrust loads. The series operates with a full-ball...

{{productDetail[16837]}}
thrust ball bearing - ID : 0.25 - 1.5

These are Roller thrust bearing manufactured by Unitec which is designed for the plastic industry....

{{productDetail[37890]}}
thrust ball bearing - ID : 0.25 - 1.5

BNL plastic bearing technology can eliminate the requirement for numerous amounts of parts for beacons...

{{productDetail[15983]}}
thrust ball bearing - ID : 0.25 - 1.5

Thrust ball bearings are designed to handle axial loads
only.
Thrust ball bearings...

thrust ball bearing - ID : 0.25 - 1.5

Double-direction Thrust Bearing...

thrust ball bearing - ID : 0.25 - 1.5

The raceway of housing washer of this bearing type is spherical with the center of...

{{productDetail[7385]}}
thrust ball bearing - ID : 0.25 - 1.5

The rarceway of housing washer of this bearing type is spherical with the center of the radius lacated on the bearing axis. The design provides self- alignment capability...

thrust ball bearing -

Thrust ball bearings can handle axial loads only. Bearing rings mounted on the shaft are called shaft washers, and those mounted in the bearing housing are called housing washers. Both washers contain grooves for the balls....

{{productDetail[18417]}}
thrust ball bearing -

Thrust ball bearings are separable axial bearings:

- Available in single direction...

thrust ball bearing -

Cylindrical roller thrust bearings are separable axial bearings:

- Available in single...

thrust ball bearing -

Spherical roller thrust bearings are separable single direction acting axial bearings

*...

roller thrust bearing - ø 2 540 mm

Customer requirements:

Replacement solution for a special bearing for high thrust loads...

{{productDetail[26921]}}
roller thrust bearing - ø 2 540 mm

RKB thrust ball bearings are manufactured in two versions: single and double direction. They can carry heavy axial loads, but they cannot take radial loads.

The single direction bearings consist of shaft washer,...

roller thrust bearing - ø 2 540 mm

In RKB spherical roller thrust bearings the load is transmitted from one raceway to the other under an angle of about 50° related to the bearing axis.

They can take over heavy axial loads and simultaneously they can accommodate radial loads with values of up to 55% of the axial load...

roller thrust bearing - ø 2 540 mm

RKB taper roller thrust bearings have the following separable parts: shaft washer, housing washer and rolling element assembly.
RKB manufacturing program includes the single direction type, the double direction type and the screw-down...

roller thrust bearing with lock screw for round flat - SDB series

For finishing stands of
hot rolling mill

Suitable...

{{productDetail[27918]}}
Subscribe to our newsletter
Thank you for subscribing
There was a problem with your request
Invalid email address

Receive updates on this section every two weeks.

With DirectIndustry you can: Find a nearby distributor | Contact the manufacturer to get an estimate or a price Examine product characteristics and technical specifications | View PDF catalogs and other online documentation