Voltage measuring devices

50 companies | 112 products

The FLIR VP52 is a tough, CAT IV-rated Non-Contact Voltage Detector featuring a combination...

{{productDetail[7945]}}

The Chauvin Arnoux SHT40kV is a hand held high voltage probe. The SHT40kV...

Chauvin Arnoux test measurement voltage absence testers (VATs) C.A 740N and C.A 760N check for the absence of voltage in compliance with Edition 2 of the IEC 61243-3 standard workplace legislation...

{{productDetail[7692]}}

The HT2055, generally composed of a station and a meter-designed model, is generally designed to perform step-contact voltage measurements on electrical installations involving HV power station (TN system, electrical...

The HT20 is a pen voltage detector engineered by HT Instruments. It is constructed in compliance...

The HT 5 is a voltage detector developed by HT. It is a device which provides quick...

{{productDetail[18971]}}

The BK Precision HV-44A is a self contained 40kV high voltage probe meter. The probe...

{{productDetail[18583]}}

The ROHM voltage detector IC series are reset IC with highly accurate detection voltage of ±1% , low current consumption, small thin packages and wide range of detection voltage. They...

{{productDetail[13683]}}

In just one or two seconds, an operator can find out whether if it is secure to work around regions such as: transformer gear...

{{productDetail[29813]}}

The Pl series is a range of high voltage clamps from Circutor that is designed to monitor currents...

{{productDetail[11644]}}

The PIM 100 series and PCD 100 series is the combination and ring wave test system manufactured by Haefely. The units can be used in a broad line of test applications. Stimulating lightning impulses coupled...

The PSurge 8000 is a superbly engineered system, geared to test surges in an array of applications. The modular system is designed such that along with meeting current surge testing requirements of users, it can be upgraded to meet their future surge testing requirements as well. It can thus accommodate users' expansion...

{{productDetail[17027]}}

The TensION, manufactured by SimcoIon, is a high-voltage detector which is used to check AC/DC Simco-Ion discharging and charging device....

{{productDetail[27568]}}

The TQC Low Voltage Pinhole detector enables the user to inspect various coatings on conductive substrates for small defects such as holidays and pinholes using the ’wet sponge technique’

The grounding clamp is connected to an untreated piece of the substrate...

{{productDetail[23214]}}

Model S631 DC Voltage Level Detector features an effective and accurate solution to monitor DC voltage. When monitored...

{{productDetail[134413]}}

The GFD Series is a range of underground systems alert from Marsh Bellofram that is designed to display the phase of the first...

The BFA series is a line of fuses manufactured by Marsh Bellofram. It is equipped with a nominal 3-phase line voltage, flashing green normal...

This is a Class 1, Division 2 FM approved UPA-130-DIV-2 power alert device that can be used in dangerous circumstances. It is capable of pre-verifying the electrical isolation from outside so there...

The UPA 130S Power Alert helps in managing the risk from electrical arc flash. The device carries out a pre-verification process of electrical isolation from outside the control panel. It has been hardwired to the main disconnect or...

The UPA-100S by Marsh Bellofram is a voltage detector which reduces the risk of an electrical arc flash. It function by simply pre-verifying an electrical isolation coming from the...

{{productDetail[11788]}}

The MIG0603IN S is a combination wave generator that operates with up to 6kV/3kA of currents. This unit is designed...

The MIG1206 by EMC Partner AG is a Combination wave and surge impulse tester which...

The MIG2412 by EMC Partner AG is a Combination wave and surge impulse tester...

{{productDetail[40473]}}

The test pistol is used for contacting the test object during the manual high-voltage test. Various high-voltage test pistols are available for individual tasks....

{{productDetail[19475]}}

This voltage detector is standard in nature. The model code is IEC 61243-3.It is used for checking if the voltage is absent and gives the voltage indication when the voltage...

DC3600BP is designed ensuring IEC 61243-2 standards with suitable use for No-Voltage Testing of direct current overhead lines (mainly transport overhead lines: trams, metro, trains). A few models in this range...

The TR, TRL and TRC by Sibille Fameca Electric is an insulated rod which features its compliance to IEC 60855-1 and IEC 61235-S. For this model, it can be used in checking...

Compact insulated rods which can be used in great heights. The standard models are IEC 60855-1 and EN 60855-1. They can work in high voltage environment too like installation or removal of lifelines, measuring hooks and so on. The operation of the...

The PXV is an insulated rod, manufactured by SIBILLE FAMECA electric. It is applicable in all weather use, including no-voltage testing, earthing in MV/LV lines and substations, disconnector...

{{productDetail[8308]}}

The DY 1811-12 is a three phased voltage detector developed by ELEN Srl. This...

The MV mobile voltage detector detects the absence and presence of voltage signals. It can be applied on ENEL primary/secondary electrical stations...

The three-phase voltage detector is manufactured by Elen, and has features to signal a presence or absence of voltage on mid voltage cabinets. There...

The ELEN Integrated MV three-phase IVS 61958 voltage detector are commonly used to detect voltage presence and are often found on mid-voltage...

{{productDetail[64970]}}

The High-voltage Detector Series HVP-275 is manufactured by Tecpel, is a high voltage proximity detector that has eight voltage detection...

The DP-25 converts the high voltage differential input signal to a low voltage ground referenced signal for display on any Oscilloscope....

{{productDetail[35126]}}

The capacitive measuring method of the product allows contact-free voltage measuring to be carried out quickly and easily. The LED glow lamp starts to pulsate as soon as...

The capacitive measuring method allows contact-free voltage for measurement to be carried out quickly and easily. The red LED glow lamp starts to pulsate as soon...

The BE20 model is a medium-voltage detector that is constructed in accordance with stringent standards and is equipped with numerous features. Housed in an enclosure based on Ingress Protection...

{{productDetail[36729]}}

This pocket-sized voltage detector is a part of the latest Fluke VoltAlert™ AC non-contact...

{{productDetail[7570]}}

The Teledyne Lecroy ZS series High Impedance Active probes offer topmost impedance and also pervasive package of probe tips and basic components to stem an extensive array of probing...

The Teledyne Lecroy are high performance High Voltage Differential Probes. The revolutionary...

Teledyne LeCroy PPE series of high voltage probes have been designed for applications demanding safe and precise high-voltage measurements....

{{productDetail[14042]}}
Subscribe to our newsletter
Thank you for subscribing
There was a problem with your request
Invalid email address

Receive updates on this section every two weeks.

With DirectIndustry you can: Find a nearby distributor | Contact the manufacturer to get an estimate or a price Examine product characteristics and technical specifications | View PDF catalogs and other online documentation