|
|
ERNI has developed a solution to the dilemma posed by high pin-count hard metric (HM) connectors and the need for precision connector mating combined with sufficient play between subtraack guide rails and printed-circuit board (PCB) cards. The answer is ERNI's pre-alignment module.
According to IEC 61076-4-101 standard, 2 mm HM connectors may have hundreds of contacts. At the same time, the plug-in board connectors and backplane connectors must mate precisely in order to avoid damage. On the other hand, there must be play between the cards and rails to avoid compression stress on the PCB.
A further reasonable additional option is the electrical contact model. Shielding is low resistant because of gold plating, and therefore allows electric current to flow with 40A at 20°C through a large diameter. A corresponding derating chart is available.
|
|
FAST AND CENTRALISED ON-SITE CONNECTION OF YOUR ENERGY CIRCUITS FOR PROCESS AND MAINTENANCE EQUIPMENT.
- compressed air
- cooling fluids
- industrial vacuum
- electricity
To satisfy your requirements in terms of simultaneous connection of air, cooling fluids and electricity, Stäubli has developed the Combitac programme.
CENTRALISED CONNECTIONS FOR MORE PRODUCTIVITY AND BETTER SAFETY.
With the Stäubli CombiTac system, you connect and disconnect your air, cooling and electrical circuits in a single motion with no crossed connection: you save time and improve safety.
COMPLETE AND TAILORED SOLUTION TO FULFIL YOUR NEED
The CombiTac programme, offers you:
- on one hand, complete pneumatic system designed by our R&D department.
- on the other, a wide choice of module units to enable you to configurate the CombiTac solution the best suited to your application.
|
|
|
|
|
|
With operations in 30 countries and sales of 1.3 billion euros in 2006, FCI is a leading manufacturer of connectors. Our 13,500 employees are committed to providing customers with high-quality, innovative products for a wide range of consumer and industrial applications.FCI designs and manufactures connectors solutions targeting the following market applications:
> AUTOMOTIVE
FCI provides connectors systems for engine, cockpit, safety, multimedia and other electronic applications. Through outstanding quality, cost competitiveness and delivery performance, FCI is recognized by its customers as their strategic partner.
> ELECTRONICS
FCI is a leading supplier of interconnect solutions for networks
and telecommunication infrastructures, consumer electronics, data storage,
medical and instrumentation applications.
> ELECTRICAL
FCI provides a complete range of electrical products that cater to the
vast power utility sector, including construction, maintenance and repair,
public services and central office. We are constantly adding to our range
of products and services by producing targeted solutions for the most demanding tasks.
> MICROCONNECTIONS
FCI is the world’s leading supplier of micro circuitry on flexible films
for smart card applications. FCI has solid expertise in consumer peripherals, antennas for RFID applications and flexible circuits for customized applications.
|
|
EPIC® INDUSTRIAL CONNECTORS
When we talk about secure connections, you can take us at our word. EPIC® industrial connectors produce an absolutely secure connection in combination with ÖLFLEX® cables. We provide the right contact for all your needs: From rectangular or circular connectors, to housings, inserts, contacts and accessories, bus or fibre optic cable applications.
|
|
|
Mencom Corporation manufacturers a wide range of PVC, PUR, and Hi-Flex quick disconnect cables. The product lines include; standard MIN (M18,) MICRO (M12,) and NAN (M8) cord sets and field wireable connectors. In addition to the cord sets, Mencom also offers a full line of mating receptacles, cable glands, and other accessories
|
|
|
|
|
|
CONNECTORS:
POWER ENTRY MODULES WITHOUT LINE FILTER:
SCHURTER’s devices are based on IEC Connectors with additional functions. They meet international safety standards. Available for screw-in, snap-in, PCB, or sandwich mounting.
POWER ENTRY MODULES WITH FILTER:
SCHURTER’s devices are based on IEC connectors with line filters and meet international safety standards. Available current ratings range from 2.5 Amps to 20 Amps, for screw-in, snap-in, PCB, or sandwich mounting.
CONNECTORS (INLETS/OUTLETS):
SCHURTER’s IEC Connectors meet international safety standards. Available current ratings range from 2.5 Amps to 20 Amps, for screw-in, snap-in, PCB, or sandwich mounting.
CORD CONNECTORS (REWIREABLE):
SCHURTER Rewireable AC Cord Connectors meet international safety standards IEC, UL and CSA where applicable. Available current ratings range from 2.5 Amps to 20 Amps.
DISTRIBUTION UNITS:
SCHURTER Power Distribution Units meet international safety standards, according to IEC, and CSA where applicable. Available current ratings range from 2.5 Amps to 20 Amps.
CORD SETS:
SCHURTER AC Cord Sets meet international safety standards. Available current ratings range from 2.5 Amps to 20 Amps.
|
|
The electrical connection of sensors via connectors has become more and more important in the last few years. Easy handling as well as high uptime of the machine are paramount for the customer and require high-quality and reliable products.
Due to the large variety of sensor designs ifm electronic supplies a wide standard range of high-quality products covering the families M8, M12, M18 through to the valve connectors.
The M12 design in particular has become firmly established on the sensor market for many years and is therefore the preferred choice for extremely harsh applications.
To be able to meet the different application requirements three product series have been developed with the following application focus.
|
|
|
HARTING industrial connectors are suited for the hardest requirements in industrial environments. They are used in all applications requiring a safe, removable electrical connection. The field of application for HARTING connectors is in protected electrical areas, for example in control cabinets to outdoor applications under the harshest environmental conditions.
|
|
Description:
PC/104 Stackthrough Connector - 2.54mm Pitch
Features:
2.54mm Pitch Dual Row, 12.2mm Solder tails
Finish:
Gold
|
|
The evolution of technology requires electrical circuits for machine controls to be ever more numerous and complex.
Our company, with more than 40 years experience in the manufacturing of multipole connectors has been involved in the research and design for maximum connection, reliability and speed of installation. We now offer a new series of connectors with a spring self-blocking connection (distinguished in the part number by the letter “S”).
|
|
- FPC Connectors :
Flat printed Cable connection has earned a reputation as one of the most reliable interconnect solutions for miniaturised products. Our XF2 range of SMT connectors includes devices with double sided contacts to maintain a stable contact force, unique rotary lock mechanisms and the smallest on-board size in the industry. >>
- PCB Connectors :
Range of PCB connectors including Half Pitch, DIn and DIN-Style, Flat Cable, D-Sub, DVI and USB types >>
- Sensor I/O Connectors :
Range of Cable connectors specifically designed for Sensors. Water resistant and Smart Click types available. >>
|
|
Features
* Rotational blindmate error correction
* Sequential mating
* Mechanically keyed housing
* Rugged and durable
* Interchangeable genderless design
Benefits
* Enables blindmating from 2 independently rotating axes with .100" of error correction
* Can be configured with up to 8 power and signal or 6 power and signal circuits and 2 pre mate contacts
* Ensures proper mating
* The connector is rated to 10,000 mating cycles and constructed of chemically resistant PBT plastic
* Makes assembly quick and easy and reduces number of parts stocked
|
|
QuadraPaddle Signal Contact Technology
QuadraPaddle technology allows infinite configuration possibilities for Test & Measurement interconnectivity. Our innovative contact designs are engineered to accommodate a variety of connection options. High density 192 and 480 pin modules molded on .100” (2.54 mm) centers provide seamless integration with COTS products, fit all standard VPC Mass InterConnect Systems, and allow consolidation of multiple instrument connections within the space of a single or double receiver interface position.
TriPaddle Signal Contact Technology
TriPaddle Signal contacts carry up to 5 amperes (22 AWG wire) or 10 amperes (14 AWG wire) continuous and can carry pulsed current up to 15 amperes at a maximum duration of 800 milliseconds. Resistance ranges from .002-.005 OHMS. Superior performance is achieved by VPC's patented Tri-Paddle design.
|
|
- EPIC Connectors are the choice quick connect and disconnect technology for all power and control connector applications where reliability and durability are key requirements.
- EPIC Connectors are used in many electrical applications ranging from main frame computer systems to machine tool panel control.
- Now Available With NPT Threads
|
|
910 H
ELECTRICAL CONNECTOR CIRCULAR 910 / bayonet coupling anodized or nil plated aluminium
Features & Benefits
Shell Sealing : Aluminium alloy, black anodized or green, Hermetic : Stainless steel
Insert Sealing : Fluoro silicone, Resistance : Fluids, as per UTE-C 93422 model HE 310 A, Hermetic : Sinleved glass and silicone elastomer
Contact Sealing : Crimp type, gold plated, Hermetic : Solder type, gold plated
Durability : 500 mating and unmating operations
Insert contact retention : 10 to 12 daN
Temperature range : - 55 C to + 175 C
Sealing : Less than 16 cm3/hour under a 2,1 bar differential presssure
Maximum current : 5 to 13 A. max.
Withstanding voltage : At sea level Service 1 - 1500 V eff. 50 Hz, Service 2 - 2300 V eff. 50 Hz
Insulation resistance : ≥ 5000 MΩ to 25 C, Insulation contacts : 3 to 14 MΩ
Compact and light
Standards and Quality Approvals
UTE-C 93422 m HE 310 A
Technology/ Coupling System
Hermetically Sealed
Environmentally Sealed
Bayonet locking
|
|
- No minimum order quantities
- Same day shipment on in-stock products
|
|
Copper tubular cable lugs and connectors - Cu
Tubular cable lugs and connectors - nickel, stainless steel
Compression cable lugs and connectors to DIN - Cu
Solderless terminals, connectors and pin terminals to DIN - Cu
Sleeves for compacted conductors and sector shaped conductors
Compression cable lugs and connectors to DIN - Al
Compression cable lugs and connectors, Al/Cu
Clamps and screw connectors
Cable end-sleeves
Kable connections, insulated and non insulated
Assortments
|
|
OBO presents a complete range of connection and fastening systems. With a product range extending from junction boxes, cable glands, flange clamp systems, clips and rail systems to screw and drive systems.
New at OBO: the conversion of the Pg system previously standard in Germany into the internationally standard metric system. The changes essentially affect the product areas of electrical installation pipes, cable glands and line passages, cable junction boxes, installation boxes, distribution housings, domestic connection and terminal boxes, switch cabinets and housings.
An interesting product innovation at OBO is the Quick-Pipe, the clever OBO pipe system. Quick-Pipe, which closes automatically with a twist, combines the benefits of closed pipe and open line installation.
|
|
|
|
|
|
3M™ Electrical Connectors
The best connectors do more than fit your application; they also fit your hand, and they feel good to use. At 3M, we design connectors that are as comfortable and easy to use as they are dependable. Our complete line provides a wide range of connector choices. Simply choose the connector that fits your personal preference, as well as the application. We give you plenty of choices.
Start with the unique 3M™ "Performance +" Wire Connectors. See just how easy it is to work with three sizes instead of seven, and still cover the entire 600-volt copper wire range. The Scotchlok™ connectors are our original color-coded line of wire connectors designed with the exact features requested most by electricians. 3M wire connectors are durable for regular or low-voltage systems in construction, industrial, maintenance, OEM or irrigation. Highland™ wire connectors offer an affordable alternative with no compromise to quality. Our 3M™ Direct Bury products splice and effectively moisture-seal two or more conductors for remote-control circuits in irrigation and landscape lighting systems. 3M™ Scotchlok™ Lugs and Connectors are crimp connectors for power cable conductors. These connectors are used when splicing and terminating power cable.
|
|
Our industry knowledge coupled with our understanding of the design requirements, parameters and specifications enable us to develop standard and custom solutions quickly and cost effectively. Greene, Tweed focuses on dependable components for any possible operating condition. Most systems count on the reliable communication of power and data through connectors and other electrical components. Building on and working with our expertise in material selection we provide improved dependability for electrical connectors that function seamlessly in critical applications.
Our series of Seal-Connect® electrical connectors not only stand up to the extreme conditions of downhole and subsea environments but also provide superior reliability in challenging medical and biotechnology applications.
|
|
gesis® - one name, one idea, an unparalleled success story! With its pluggable electrical installation system Wieland has been the unchallenged market leader for 30 years. No wonder since time savings of 70 % and cost reductions of 30% still speak for themselves.
The benefits of the "plug & play" principle apply everywhere: cutting to length, stripping and clamping are matters of the past, for the gesis® system components are industrially pre-assembled and tested. Everything fits perfectly and simply has to be plugged together on site. gesis® is the standard for safe and error-free installation.
The gesis® system comprises connectors, radio-controlled switching devices, devices for remote building automation and pluggable distribution boxes for modern facility management, cables and busbars as well as low-voltage systems.
|
|
|
|
|
|
To avoid to the user problems of compatibility between accessories and connectors, Amphenol provides its customers with a large range of rear accessories. Amphenol connector backshells are designed to terminate screened or unscreened cable.
Main features :
- Shell material
- Aluminium alloy
- Marine bronze
- Finish
- Olive drab cadmium plating
- Electroless nickel plating
- 9 shell sizes per model
- Straight or right angled versions
- Working temperature
- From -65°C to + 175°C with olive drab cadmium plating
- From -65°C to + 200°C with electroless nickel plating
- French standard qualification capability (UTE 93422)
Description
Amphenol Socapex offers backshells for LJT (MIL-DTL-38999 series I / HE308), RNJ (HE308), RNJ LP, TV-CTV (MIL-DTL-38999 series III) and SJT (VG96912) connectors, as well as specific light weight backshells for JT(MILDTL- 38999 series II) connectors. These rear accessories enhance the performance capabilities of the connectors for both general duty and severe environment
|
|
Designed to reduce conducted mains borne EMI, this extensive range provides many solutions to EMI problems. To meet individual design requirements the filters are available with two attenuation options – standard and medical. Current ratings are from 1 to 10 amps with single or twin fused types also available.
The choice of mounting options will suit most applications with flange, snap to panel or base/bulkhead.
|
|
|
|
|
|
Complementing our premium line of EMI filtered and unfiltered connectors, we offer a variety of specialty filtered connectors, and a wide range of value-added harnessing products and services for all your commercial, industrial and military needs. With a complete line of compact and extended shell filter connectors, Spectrum provides vast design flexibility to reduce the amount of real estate required within a product enclosure.
Our unfiltered connectors are built to meet various environmental and mechanical requirements as well as MIL specifications, providing you with a custom shell to fit your space. Power, signal and coax line combinations are available, each built with integral strain relief to ensure a high quality connector.
To meet the highest workmanship standards, our MIL-STD-2000 certified operators and manufacturing engineers work in well-equipped, modern facilities to build and design tooling and fixturing of the tightest tolerance. By providing interconnect assemblies, our custom harnessing products are in compliance with all requirements. Services include lead wire preparation, soldering and tinning, marking and ribbon cable processing.
• Custom configurations of filtered MIL-STD connectors available
• Specialty EMI filtered and unfiltered connectors
• Tubular and planar filtered arrays using Pi, LC, T and C circuits with TVS protection available
• Effective insertion loss from 1MHz to 18GHz with proper installation
• Connector temperature range of -55°C to +125°C
• All harnessing built in accordance with IPC-A-610 and J-Std-001
• Harnessing temperature range of -55°C to +200°C
|
|
|
A specialized range of I/O connectors equipped with capacitive filter elements enabling engineers to design network and communications equipment to meet FCC and other national standards governing the level of emissions of RFI and EMI energy.
|
|
Eliminates the problem of conducted EMI in data line applications
Provide common- and differential-mode noise attenuation.Reduce noise by a factor of 32 from 15 MHz to 300 MHz.High current (500 mA) versions available.300 Vrms isolation.Excellent environmental stability and low cost Available in 4, 3 and 2 line versions
Consider our CCDLF series for 10 and 8 line applications
RoHS-compliant. 260°C compatible. Tin-silver-copper over tin over nickel over phos bronze terminations.
Samples of all values plus samples of CCDLF and through-hole versions are available in Coilcraft Designer's Kit D303
|
|
Amphenol EMI / EMP Protection connectors offer the versatility of standard connectors with EMI / EMP protection for sensitive circuits. Internal housing of the EMI / EMP devices eliminates costly and bulky exterior discrete protection devices.
Virtually all major MIL-Spec cylindricals can be incorporated with filter devices :
- MIL-DTL-38999 - MIL-DTL-5015
- MIL-C-26482 - MIL-C-27599
- MIL-C-83723 - MIL-C-26500
Amphenol offers filter connectors that include :
- EMP protection using diodes
- EMP protection utilizing metal oxide varistors (MOV’s)
- Filtered plug connectors
- Filtered hermetic connectors
- Programmable filtered connectors with rear removable and rear insertable crimp contacts
- Filter connectors with ESD protection
- Combinations of filtering devices within one connector package
Advantages of Filter Connectors :
- Reduction in overall weight and space with the elimination of external filter circuits
- Reduction of solder junctions
|
|
We offer a filter adapter set that has a variety of sizes and capacitance values for use in testing and evaluation of equipment.
The adapter set consists of our filter adapters with a capacitance range of 370 pF to 1300 pF, from 9 to 50 positions.
These adapters utilize our patented planar filter technology and high reliability gold plated precision screw machine contacts, which are available in three quality classes.
Our adapters are supplied with screw locking hardware with 4-40 UNC or M 3 thread. The adapters can be mounted on the panel or inline with cable assemblies.
|
|
|
Pasternack's DC Blocks are primarily used to protect DC-sensitive RF circuitry in applications where DC power might exist on a transmission line or where a DC power spike might be generated. The DC Blocks operate to 18 GHz and are available in inner-only, outer-only and inner/outer DC block configurations.
|
|
Rack & Panel Mount Connectors with Hermaphroditic Contact System
Features:
- UL Recognized
- .150" (3.81mm) Contact Spacing X .130" (3.30mm) or .150" (3.81mm) Row Spacing with Staggered Gold
- Plug and Receptacle in 20, 38, 56, 90 or 120 Contact Sizes
- EDACON Hermaphroditic Contact Mating Design
- Contact Termination Options include Crimp, P.C. Tail, Wire Hole and Wire Wrap
- Mating and Unmating Simplified by use of Actuating Screws
- Optional Covers with Side or Top Entry Cable Clamp in Plastic or Mateal Material Available for all Connector Sizes
- Versatile Metal Cover Design Permits Assembly or Disassembly after Cabling is Complete plus Cable Entry Style Flexibility
- Actuating Screws, Locknuts,Polarizing Hardware, Covers and Contacts Suitable for either Plug or Receptacle
- Polarizing Hardware Adjustable for 288 Mating Combinations
|
|
|
|
Other electric connectors: with EMI filters, hybrid... 
