Band-pass electronic filters

... of CISPR22 /EN 55022 Class B. EMC filter used with the MORNSUN AC/DC module, AC/DC module’s max. Input voltage must not more than EMC filter’s max. Voltage, AC/DC module’s max. Input current must less ...

Frequency: 150 kHz - 500,000 kHz
Voltage: 110 V
Primary current: 3.5 A

FEATURES - Meet IEC/EN61000-4 series standards and CISPR32/EN55032 - Meet railway industry EN50155 standards - Efficiency up to 98%

Frequency: 150 kHz - 30,000 kHz
Voltage: 14 V - 160 V
Primary current: 8.3 A

FEATURES - Ultra-Wide input voltage range: 14 -160VDC - High efficiency up to 98% - Operating ambient temperature range -40℃ to +105℃ - Meet IEC/EN61000-4 series standards and CISPR32/EN55032 - Meet railway industry EN50155 standards

Frequency: 24 MHz - 3,000 MHz

... the factory for your specific requirements. An additional feature of our Tunable Filter Product Line is the ability to ship standard bandpass and bandreject filters overnight from stock.

Frequency: 18 GHz

Planar X Thin Film RF Filter solutions Planar X Series is part of an overarching initiative by Smiths Interconnect that entails the creation of best-in-class planar RF filter solutions designed and tested ...

Frequency: 5 MHz - 10 MHz

Miniature discrete component filters are available from HF to X-band and are designed to give optimal performance where small size is critical. Electrical and mechanical requirements for each design are ...

Frequency: 2,400 Hz - 2,500 Hz

Status - Mass Production (Preferred) System - Bluetooth/W-LAN/ZigBee Input Impedance - 50 Ω Output Impedance - 50 Ω Dimension L - 1.6 ±0.10 mm Dimension W - 0.8 ±0.10 mm Dimension T - Max 0.5 mm Operating Temp. Range - -40 to +85 ...

Frequency: 2,400 Hz - 2,500 Hz

Status - Mass Production (Preferred) System - Bluetooth/W-LAN/ZigBee Input Impedance - 50 Ω Output Impedance - 50 Ω Dimension L - 1.0 ±0.05 mm Dimension W - 0.5 ±0.05 mm Dimension T - Max 0.4 mm Operating Temp. Range - -40 to +85 ...

Frequency: 5,150 MHz - 5,925 MHz

Status - Mass Production (Preferred) System - LTE(LAA)/W-LAN Input Impedance - 50 Ω Output Impedance - 50 Ω Dimension L - 1.6 ±0.10 mm Dimension W - 0.8 ±0.10 mm Dimension T - Max 0.65 mm Operating Temp. Range - -40 to +85 ℃ RoHS ...

Frequency: 60, 50 Hz
Voltage: 208 V - 480 V
Primary current: 20, 320, 40 A

... Energy? • More than 20 years experience in active filtering solutions • Compliance to grid standards and norms • Integration of load balancing, power factor compensation and harmonics filtering ...

Modular Jack Filters, 8-Pin Jack, 8 Loaded Positions, RJ45 Connector Input, PCB Mount Output, Filtered, None, None, Ethernet Magnetics • TE Internal Description: DISCR.ETH.MAG. 10/100 SINGLE SMT • Filter ...

Modular Jack Filters, 8-Pin Jack, 8 Loaded Positions, RJ45 Connector Input, PCB Mount Output, Filtered, None, None, Ethernet Magnetics • TE Internal Description: DISCR.ETH.MAG. 1GB SINGLE SMT • Filter ...

Voltage: 250 V
Primary current: 15, 10 A

Power Entry Module with Switch. A two function power entry module combining a DPST switch and an IEC 60320-1 inlet. •Input Connector Type: IEC 60320/C-14 •Input Connector Style: Male Receptacle •Output Termination Type: 3/16"

Voltage: 650, 130 V
Primary current: 10 A - 200 A

IEC/EN 60939 approval Rated currents from 10 to 200 A 2.5 kV pulse test capability Class Y4 capacitor Leakage current : 0.98 to 460.7 mA Capacitance : 10 to 4700 nF Rated current : 10 to 200 A Attenuation performance : very high Voltage ...

Frequency: 60, 50 Hz
Voltage: 480, 400 V
Primary current: 30 A - 400 A

... filtered for maximum filter effectiveness Power factor correction both inductive and capacitive Phase current balancing, improvement of consumption in neutral (4W model) If higher filtering capabilities ...

Frequency: 60, 50 Hz
Voltage: 480, 400 V

LCL filters have been specially designed to eliminate the harmonics from the current absorbed by 6-pulse power converters, such as frequency variators for motors, UPS, etc. These are essentially passive filters ...

Voltage: 24 V
Primary current: 4 A

Filters of the SFK12-4S2124 series are used to suppress circuit-bound interferences in DC supply lines or DC control lines with a voltage of 24VDC. Interference pulses or interference voltages are dampened independently ...

Voltage: 48 V
Primary current: 4 A

Filters of the SFK12-4S2148 series are used to suppress circuit-bound interferences in DC supply lines or DC control lines with a voltage of 48VDC. Interference pulses or interference voltages are dampened independently ...

Voltage: 24 V
Primary current: 16 A

Filters of the SFK12-16S2124 series are used to suppress circuit-bound interferences in DC supply lines or DC control lines with a voltage of 24VDC. Interference pulses or interference voltages are dampened independently ...

TDK offers a wide range of different line filters: common-mode chokes for power lines, differential-mode chokes and sine-wave chokes. Whereas the common-mode chokes are used to reduce the asymmetrical interference level ...

Frequency: 824 MHz - 5,900 MHz

Pasternack RF bandpass filters (BPF) are tractable coaxial elements that permit particular frequencies to move within a specific distance and declining frequencies (attenuation) beyond that range. Bandpass RF filters ...

Frequency: 100 MHz - 3,000 MHz

... tunable band pass filters and band reject filters (also referred to as band-stop filters or band-rejection ...

Pasternack WR-28 waveguide bandpass filters are low loss RF components capable of handling high power with high isolation. Our WR-28 waveguide bandpass filters components from Pasternack are commonly ...

Frequency: 50, 60 Hz
Voltage: 380 V - 690 V
Primary current: 1.5 A - 250 A

DAQI ® passive harmonic filter is specifically engineered to mitigate harmonic currents created by non-linear loads. It is currently available from 1.5 to 250kw and it improves power quality by simultaneously reducing ...

With the development of power electronic technology, the application of power electronic equipment, such as all kinds of rectifier, is widely used in industry, traffic and domestic appliance, and the ...

Frequency: 50 Hz
Voltage: 380 V
Primary current: 20 A

SKS-OCL series Load Reactors are placed in series with electrical equipment to introduce a specific controlled impedance to the AC circuit. This series are applied at AC drive output side to suppress inrush voltage, reducing inrush and ...

Frequency: 160 MHz

RRF-160-NFF 160MHz Band Pass Filter PolyPhasers weatherized band pass filter surge protector is designed for 160 MHz railroad wayside ...

Frequency: 50 Hz - 60 Hz
Voltage: 520 V
Primary current: 8 A

... Benefits Increase in the interference immunity of the connected equipment Efficient filter effect against line-bound interference emissions Single-stage filter concept Reduced leakage current ...

Frequency: 50 Hz - 60 Hz
Voltage: 400 V - 600 V

Matrix AP Harmonic Filters Product Overview The Matrix AP Harmonic Filter with MTEs innovative adaptive passive technology*, is the most advanced harmonic filter that provides improved ...

Frequency: 320 MHz - 2,500 MHz

... example in cordless telephones and mobile transceivers there is a need of high selectivity RF filter circuits. We have developed a series of helix filters providing an improved performance in such applications. At ...

The series of Harmonic filter reactors, which is manufactured by Entes, is device that is suitable for use in serial connection with capacitor banks in power factor correction components. By utilizing these kinds of reactors, ...

Frequency: 20 MHz - 150 MHz

Crystal Filter(MCF) is Band pass filter that can take out only a necessary frequency. The crystal high Q factor allow crystal filters to have steep band-pass ...

Frequency: 400 Hz
Voltage: 250 V
Primary current: 16 A

RF filters which provide high attenuation in both differential and common mode. Their extended low frequency performance makes them particularly suitable for industrial frequency converters, motor drives and switch mode ...

The MAX7418–MAX7425 5th-order, low-pass, switched-capacitor filters (SCFs) operate from a single +5V (MAX7418–MAX7421) or +3V (MAX7422–MAX7425) supply. These devices draw only 3mA of supply current and ...

Frequency: 5 Hz - 150 Hz
Voltage: 0 V - 500 V
Primary current: 110 A

... Optimized drive efficiency Major reduction of leakage currents Elimination of bearing currents Applications Sine filter for the suppression of differential mode interference and common mode interference.

ON Semiconductor offers LC, RC, and common mode filters for a wide variety of audio and data interfaces.

Frequency: 50 Hz - 60 Hz
Voltage: 380 V - 480 V
Primary current: 190, 250, 310, 400 A

The flexible filter for central/decentral harmonic mitigation The VLT® Advanced Active Filter AAF 006 improves system efficiency and increases grid robustness to avoid downtime. It can compensate for ...

Frequency: 100 MHz - 156 MHz

HK-VSOF01 VHF single cavity band-pass filter applies to building civil aviation communication system. It can improve the selectivity of receivers. When multiple transmitters share one ...