|
|
|
|
|
|
Specifications
1. Operating Temperature : -25°C ~ 85 °C
2. Capacitance Range : 1.0 ~ 120.0 µF
3. Capacitance Tolerance : J = ± 5%, U= 10 ~ - 5 % , K = ± 10%.
4. Rated Working Voltage Range : 250 ~ 500 Vac 50/60 Hz
5. Withstand Voltage Test : ( A ) Dielectric strength test ( TV ):
Rated Voltage x 175 % for 1-5 Sec ( B ) Between Terminals and Case( TC ): Rated Voltage x 2 1000V for one minute, at 25 °C
6. Dissipation Factor ( DF ): 0.5 % MAX. When measured at 1 KHZ, 25 °C
7. Insulation Resistance ( IR ): ( A ) Between Terminals: Above 1000 F,at in 100VDC in 25 °C ( B ) Between Terminals and Case: Above 10000m, at 500vdc in 25 °C
8. Pull Test : Will sustain 2 Kg steady pull in the direction of lead egress and 1 Kg steady pull atany 90 degree angle for 60 seconds.
After test, capacitor shall show no evidence of damage and pass all electrical requirements
9. Damp-heat Test : capacitor are subjected to an environmental test chamber at R.H. 90 to 95 %,operating temperatures for 240 hours.
After the test, capacitor shall be conditioned at room temperature for 2 hours and meet the following criteria:
( A ) Capacitance change shall be less than 3%
( B ) Dissipation factor shall be less than 0.2 %.
( C ) Insulation resistance shall be over 50 % of the minimum requirement.
10. Life Test : ( on-off ) 100,000 cycle ± 5000 times on 2 seconds off 2 seconds at operating temperatures with rated voltage. After the test,the capacitance drift 5 %, dissipation factor 0.5 %, insulation resistance 50%.
|
|
The market orientation of the company is dedicated to establishing and maintaining close contacts with business partners. In addition to standardised products and services, Iskra Kondenzatorji d.d. prides itself on its ability to adapt to the customer's technical (electrical and mechanical) parameters and specific requirements (Custom Design), continually striving to bring our products in line with the European and international standards. Quality of products is the guiding principle of Iskra Kondenzatorji.
Our products are sold in over 40 countries worldwide.
|
|
Multi-layer Ceramic Chip Capacitors feature range of capacitance values and Lead (Pb)-free terminations
- Include Class 1 COG (NPO), Class 2 X5R, Class 2 X7R and Class 3 Y5V
- Available in industry standard case sizes (0402, 0603, 0805 and 1206)
- Ideally suited for a wide variety of space-limited applications
298D MicroTan™ Solid Tantalum Chip Capacitor
- Capacitance range: 1 µF to 220 µF
- Voltage rating: 4 WVDC to 25 WVDC
- Lead-frameless, face-down termination
- Small size (0603 and 0805 footprint)
- Applications include: mobile phones, MP3 players and other handheld commercial electronics where high CV is a key requirement
|
|
Spectrum Advanced Specialty Products offers its premium line of SMPS Capacitors to military and commercial power markets. These SMPS caps have a leaded configuration to safeguard the device against thermal and mechanical stress, ensuring the longevity of each cap’s lifetime. With high power and voltage capability of up to 500VDC, SMPS capacitors are ideal for DC-DC power supply applications. With lower ripple voltage and less self-heating, these SMPS caps also have a characteristically low ESR and low ESL when compared to other capacitive elements.
• Custom lead-frame attachments & custom capacitor assemblies available
• High reliability testing, conforming to MIL-PRF-49470
• Operating temperature range of -55C to +125°C
• Capacitance up to 47μF
• Standard sizes: SMP3, SMP4, SMP5
|
|
Multilayer Ceramic Capacitors
Case size: 01005 to 1210
capacitance: 1pF to 100uF
Voltage: 4V to 630V
|
|
|
ATC provides low cost general purpose capacitors not intended for precision designs, but suitable for many applications including DC blocking, coupling, bypassing and filtering.
|
|
|
Murata's capacitors, manufactured from our own superior ceramic materials, meet the demands of a wide variety of applications in voltage ratings from under 3V to several thousand volts. Based on our unique design and processing technologies we offer a variety of chip MLCC products from the ultra small 0402 size devices, through high capacitance products designed to replace tantalum and electrolytic dielectrics, low ESL, high frequency and array products. In short Murata has a ceramic capacitor to meet virtually every possible application. We also offer a wide range of trimmer capacitors including ultra small and thin types.
|
|
|
The application of TDK's world-leading expertise in ferrite has yielded advanced electronic components, such as multi-layer ceramic capacitors, inductors, and EMC components. Focusing on miniaturization and surface mount requirements our vast array of quality electronic components includes LAN components, ferrite cores, amorphous cores, transformers, magnets, magnet applied products, piezoelectric products, delay lines, sensors, power supply, RF components & RF modules. TDK's S Parameters data library is available for ceramic capacitors, inductors and EMC components. TDK's authorized distributor network currently stocks many of these innovative, affordable electronic components for off-the-shelf delivery.
|
|
|
broad selection of standard designs and features · engineered to meet numerous requirements · general purpose and precision · high voltage · high pulse · X-2 suppression · motor start · UL, CSA, SEV, and VDE approvals
|
|
Today's drive for miniaturization compels us to produce ever smaller MLCCs.
On the other hand, a number of electronic applications demand a combination of relative high capacitance values and medium to high voltage.
That's where the big sized MLCCs come in!
Benefits:
* High capacitance value combined with a medium voltage
* Replacement of Leaded components by smaller and cheaper SMD Components
* Very high voltages possible within Big Size products, up to 4000 V
Applications include:
* Lighting (ballast’s, electronic lamps, etc)
* Telecom infrastructure (modems, ADSL, exchanges, networks)
* Switch mode power supplies
* DC/DC converting
|
|
Metallized polyester capacitors
Metallized polypropylen capacitors
Polypropylen capacitors
Polyester capacitors
|
|
|
· total design, engineering and manufacturing capabilities · standard & special configurations & terminations · motor run · IGBT Snubber · 1% tolerance and up · low ESL/ESR · high current/voltage/pulse/frequency
|
|
|
LCR has a business partnership with Tenta, a leading China based manufacturer of polypropylene and polyester film capacitors. We exclusively use Tenta capacitors in all of our filters and control boards and supply the same high quality approved capacitors to our various US based customers for their AC suppression, DC (electronics), motor or power application needs.
|
|
Pulse Current Capacitor
- Very Low ESR and ESL Film Capacitor
- is designed for 20Hz ~ 100kHz frequency
- For higher Frequency and higher rms Current application, Switching Power Supply, input filtering, DC blocking and output filter application.
Voltage Range : 100~400Vdc / 75Vac~280Vac (other voltage also available)
Capacitance Range : 1~30uF
Low ESR and ESL
Temperature range : -25C~90C / -25C~100C
Ripple Current up to 30A
For higher rms current requirement, please contact us.
Catalogue can be download in our website. http://www.filmcapacitor-st.com
We even support small quantity order.
Prompt Delivery, worldwide !
For further details and quotation please contact us : info@filmcapacitor-st.com
|
|
|
SBE designs and manufactures the most reliable Film Capacitor products for your application. In addition to what you find here we also specialize in the design, development and manufacturing of application specific products. Non-standard capacitance values, tight tolerance, specific form factors, etc. are our specialty! Our technical staff can also work with you to develop an application specific power capacitor package to meet your demanding requirements.
|
|
|
SBE designs and manufactures the most reliable Film Capacitor products for your application. In addition to what you find here we also specialize in the design, development and manufacturing of application specific products. Non-standard capacitance values, tight tolerance, specific form factors, etc. are our specialty! Our technical staff can also work with you to develop an application specific power capacitor package to meet your demanding requirements.
|
|
|
|
|
|
Most of our capacitors can be modified according to customer's application and circuitry - electrically and mechanically, size, electrical connection and capacitor installation.
This way customers can have most benefit from our capacitors, not just price but electrically and mechanically etc...
Most of these capacitors can withstand higher frequency, voltage and discharge current circuitry application.
We support vary type of power film capacitors.
Main focus on :
- high discharge current
- stable large r.m.s. current
- high voltage application
- higher frequency range
Most of these power film capacitors can be made according to customer's application and circuitry need - electrically, mechanically, sizes, electrical connection and capacitor installation.
Customers can have most benefit from our capacitors, not just price but electrically, mechanically and even capacitor installation cost can be lower etc...
Power Film Capacitor
High Voltage Film Capacitor
Pulse Grade Capacitor
Pulse Capacitor
Snubber Capacitor
RC Snubber
Filter Capacitor
Feed Thru Capacitor
Lighting Capacitor
Motor Run Capacitor : Cylindrical type
Capacitors Network
Axial Lead Film Capacitor
Polypropylene Capacitor
Film Foil Capacitor
Welding Capacitor
Furnace Capacitor
Catalogue can be download in our website. http://www.filmcapacitor-st.com
We even support small quantity order.
Prompt Delivery, worldwide !
For further details and quotation please contact us : info@filmcapacitor-st.com
|
|
|
|
|
|
With over 25 years of production experience, Spectrum Advanced Specialty Products is proud to offer its complete line of power film capacitors. Our high DC current, high pulse capability caps are designed using simulation software to ensure the function and compliance match your needs. Available for both military and commercial power applications, Spectrum’s film capacitors can be manufactured in a variety of sizes ranging from less than an inch to upwards of several feet, with density determined by the cap’s geometry. In addition, housings are offered in plastic and a variety of metals (i.e. stainless and aluminum).
• Ruggedized, high reliability performance
• Low self-inductance, low ESR and low LF
• High peak withstanding voltage
• Wide range of dielectrics, including: Polyester (Mylar), Polyphenylene Sulfide (PPS), and Polypropylene
• Various terminations, including: radial or axial leads, machined, stamped, lugs, PCB mount threaded, and inserts
• 250-1200 typical, ripple currents up to 400 Arms
• Temperature range of -55°C to +150°C
• Electric ratings between 250 and 15K VDC
|
|
Single Phase "CRM"
With polyprolilene film of low dielectric losses. MKP System
Power range from 0.80 kVAr to 3.33 kVAr and voltage range : 230 V to 525 Va.c.
Excellent reliability, in electric networks without harmonic distortion.
Advantages
Reduction of mounting costs, easy connection.
Low weigth and compact design
Maintenance it's not necessary
Security
Self-healing capacitors IEC 831 standards.
Overpressure disconnector.
|
|
Snubber Capacitor – Axial Leads and direct PCB soldering
Film Dielectric :
Double metallized internal serial film + Metallized Polypropylene Film
Application :
- power supply, SMPS snubbering circuit and welding equipment
- Protecting Thyristor against transient voltage and current
- Applications where higher dv/dt, r.m.s. Current is encountered
STP-01QE Electrical wires + Terminals options for easier installation
STP-01Q Tin-plated copper lead wires - PCB soldering
Capacitance : 0.01uF ~ 4.7uF at 1kHz +25C
Capacitance Tolerance : ±5%(J), ±10% (K)
Voltage : 600Vdc~3000Vdc / 275Vac~750Vac
Temperature range: -25C~+85C / -25~+105C
Full rated voltage at 85C, derate linearly to 50% rated voltage at 105C
Catalogue can be download in our website. http://www.filmcapacitor-st.com
Prompt Delivery, worldwide !
For details, please contact info@filmcapacitor-st.com
|
|
It is designed to
- handle high peak pulse current, rms current and surge voltage
- ( Gate turn-off Thyristor ) GTO Snubbering protection
- Motor Control and Static Drive application
- With build-in M6 / M8 thread stub for easy connection
Catalogue can be download in our website. http://www.filmcapacitor-st.com
We even support small quantity order.
Prompt Delivery, worldwide !
For further details and quotation please contact us : info@filmcapacitor-st.com
|
|
|
|
|
|
Technical Data
1. Dielectric: Polypropylene film.
2. Encapsulation: Flame-retardent plastic case, UL 94 V-0,
3. With epoxy resin seal: Black.
4. Temperature range: 25°C to 100°C
5. Capacitance range: 0.1 ~ 4.7µF.
6. Rated working voltage range: 1000V, 1200V, 1600V DC
7. Test category: 25/100/21 in accordance with IEC
8. DAMP-HEAT TEST: Capacitor are subjected to an environmental test chamber at R.H. 90 to 95 %, operating temperatures for 240 hours.
After the test, capacitor shall be conditioned at room temperature for 2 hours and meet the following criteria
( A ) Capacitance change shall be less than 3 %.
( B ) Dissipation factor shall be less than 0.2 %.
( C ) Insulation resistance shall be over 50 % of the minimum requirement.
9. Insulation resistance ( IR ) at 25°C: Measurement shall be mad at 25°C after applyingfor 60 Sec, at 1000VDC, Above 20,000 F.
10. Dissipations factors at 25°C (tan ): 0.1 % MAX. When measured at 1 KHZ.
11. Capacitance tolerances: ± 5 %.
12. Test voltage: 2.5 Ur, 2 sec.
13. PULL TEST: Will sustain 2 Kg steady pull in the direction of lead egress and 1 Kg steady pull at any 90 degree angle for 60 seconds. After test, capacitor shall show no evidence of damage and pass all electrical requirements.
|
|
Protect IGBT modules against voltage and current transients and applications where high dv/dt is encountered.
SMKP2 series :
Voltage Range :
1000Vdc ~ 2000Vdc
500Vac ~ 650Vac
Capacitance Range : 0.1 uF - 3 uF
very Low ESR and ESL self-Inductance
High rms Current
Temperature range: -25C~+85C / -25~+105C
Full rated voltage at 85C, derate linearly to 50% rated voltage at 105C
Construction :
- Extended double sided metallized carrier film design with internal series connection and metallized film construction
- Direct Mount IGBT
Catalogue can be download in our website. http://www.filmcapacitor-st.com
We support small quantity order.
Prompt Delivery within 3-5weeks, worldwide !
For further details and quotation please contact us : info@filmcapacitor-st.com
|
|
This series of capacitor is for SCR Thyristor Snubbering.
- Voltage range : 500Vac ~ 1350Vac / 900V ~ 2300Vdc
- Capacitance : 0.1uF ~ 50uF
- Plastic Case with Epoxy Resin - dry construction
- Electrical Connection : M4, M6, M8 Bolt or Tab Terminals
- with M8 Bolt threads at capacitor bottom for capactior installation
Catalogue can be download in our website. http://www.filmcapacitor-st.com
We even support small quantity order.
Prompt Delivery, worldwide !
For details, please contact info@filmcapacitor-st.com
|
|
| ... products without technical information |
| |
|
|
Capacitors
