|
|
|
SIMONDS SR-100 Snap Ring tools is another popular tool in our standard line. With adjustable jaws and three different angle tips available, this tool meets the majority of jobs on the production line.
|
|
The CHAMPOMATOR 2.5
Terminating Machine is a
compact, semiautomatic
bench machine for terminating
multiconductor, jacketed
cable with a variety of
AMP connectors having
insulation displacement
contacts. It is microprocessor
controlled, and programmed
using a membrane-
switch keyboard.
Pertinent information for
operation, including diagnostics
and error conditions,
is displayed on the
control module.
|
|
These versatile hand tools and dies are ideally suited for R & D, networking
applications and on-site maintenance work.
• User-adjustable ratchet control for a complete crimping cycle
• Emergency ratchet release
• Angled head, providing a comfortable hand and wrist position
• Over 100 interchangeable SDE die sets for crimp a broad range of connectors
• Able to handle multiple wire and terminal sizes in one die set
|
|
Side cutting pliers, 2101D
Side cutting plier with progressive edges designed to cut hard material such as piano wire close to the joint and to cut softer material as copper wire and plastic insulated wire at the tip.
ISO: 5749 DIN: 5749
Finish: Black oxidised, anti-corrosion treated.
Material: Chrome-Vanadium steel. PVC coated handles without return spring.
Shape: An "open" joint, in which the distance from the joint centre to the cutting edges is reduced, results in greater leverage and increased cutting capacity. Progressive cutting edge which cuts hard material near the joint and soft materials at the tip. Round shaped jaws give improved accessibility in confined spaces.
Cutting capacity: Piano wire.
IP = Industrial Pack
|
|
PT-1052-1 - 6" Diagonal Cutting Pliers
PT-1057-1 - 7" Diagonal Cutting Pliers
PT-1060-1 - 7" Large Diagonal Cutting Pliers
PT-1105 - 5" Curved Jaw Locking Pliers
PT-1150 - 5-1/2" Midget Diagonal Cutting Pliers
|
|
CEI 900
Hand tools for work under voltage with a maximum alternating current of 1000 V and direct current of 1500 V.
NF EN 60900
Hand tools for work under voltage with a maximum alternating current of 1000 V and direct current of 1500 V.
ISO 5746
Universal pliers.
|
|
|
NEW! Salisbury Insulated Products (SIP) PRO-TOOL™ Insulated Tools & Tool Kits are all tested to 10,000 VAC for use up to 1,000 VAC. These tools meet or exceed ASTM F1505-01 and IEC 900 Standards for Insulated Hand Tools. These tools will help you to be compliant with OSHA 1910.333 (c)(2), and NFPA 70E 2000.
|
|
Imagine performing all of your production soldering, rework and desoldering tasks with just one tool. The new Multi Function Rework Systems (MFR) not only expertly perform rework, they also have tools for SMT and through-hole soldering. These flexible systems feature two switchable outputs with a choice of comprehensive tools that support today's complex PCB and component technologies.
Systems are configured with the following tools:
* Soldering and Rework
* Production Soldering
* Precision Tweezer
* Standard Tweezer
* Desoldering Station
|
|
|
|
|
|
PS-900 Soldering System
The power to solder demanding loads, the control to assure consistent results.
The OKi PS-900 Soldering System, powered by SmartHeat® Technology, is part of a new generation of cost-effective soldering systems from OK International. The PS-900 packs power and provides exceptional thermal control into a small benchtop footprint. The PS-900 provides operators the repeatability to produce high quality solder connections with exceptional speed.
More Applications
The PS-900 increases productivity by performing a wide range of applications. It is suited for lead-free soldering processes, multilayer boards and thermally demanding components. What's more, SmartHeat technology enables the PS-900 to solder at lower temperatures, even for such demanding applications as lead-free soldering processes. This means operators are more productive and materials are safe from damaging temperatures.
Low Operating Costs
The PS-900 is designed for simplicity and low maintenance. With SmartHeat Technology at its core, it requires no calibration. Moreover, it uses high quality tips that assure low ongoing operating costs. Its low cost makes it the perfect choice for small or large production environments, which need exceptional performance, while being mindful of operating budgets.
|
|
Eye-Rim forming machine 2D/3D
Aquisition of the model through a feeler pin. Better accuracy of the finished product thanks to the improvement of the wire properties by using a set of pressure rollers in the horizontal and vertical axes. Easy and quick machine setup when changing wire dimensions. Double check to verify there is no wire slipping to prevent any length difference. Highly precise and fast hydraulic cutting system with the possibility to choose a straight or a "V" cutting. Built-in PC and 14' "CRT monitor" equipped with a continuity group to prevent any data loss in case of black out. Easy realisation of new rim models, with curvature from 4 to 9. Easy correction of both eye shape and curvature where necessary. User-friendly "help on line" software.
|
|
|
|
|
|
The Master Controller V2 is a computerized industrial control unit housed in a robust stainless steel container, designed for automatic and semi-automatic management of soldering cycles carried out using CEIA Power Cube Induction Generators.
The Controller comes with a set of four predefined programs. All operating parameters for each phase of the heating cycle can be programmed within a wide range of values. This allows maximum flexibility in setting the heating and cooling times, the power supplied by the induction generators, the operating temperatures for the piece being worked on and the quantity and feed speed of the solder.
Together with the optical temperature sensors (SH series) and the solder dispensers (WF series), the CEIA Master Controller V2 allows the creation of efficient induction soldering systems and achievement of completely repeatable, economical heating processes and finished products.
An RS-232 serial interface allows connection to a PLC, PC or external logic for remote loading and running of operating programs.
The photocoupler-type static inputs have programmable P/N logic, and together with the static outputs are subject to a programmable auxiliary voltage of 12/24 V.
|
|
| ... products without technical information |
| |
|
|
Workshop tools for electronics
