|
|
The unique cooperation between the companies in the Trelleborg Wheel Systems Group enables us to offer rims and tires that are perfectly adapted to each other.
Trelleborg is the sole manufacturer offering complete wheels with a diameter ranging from 3.5 inches to 42 inches
Each wheel in developed in accordance with:
customer requests for both small and large volumes
total quality standards
absolute precision and rim calibration
|
|
|
|
|
|
PROTRAC® Over-the-Tire Tracks for Skid Steer Loaders
TURN YOUR SKID STEER INTO A TRACK LOADER FOR JUST A FRACTION OF THE COST.
PROTRAC® is a self-cleaning skid steer track system, which provides flotation, traction, tire protection, and stability to your skid steer loader (US Pat. 6,464,309/ 6,478,389).
Protrac over-the-tire track system by McLaren Industries is the ultimate solution for your skid-steer loader. Think of it as a stop-loss program for your skid steer.
In a perfect world your skid steer would have perfect traction. In the real world, your skid steer’s wheels are often left spinning. The result? As much as 50 percent lost productivity.
In sloppy conditions your skid steer can get so bogged down that another piece of equipment is required to pull it free.
Now you have two pieces of equipment tied up and no production going on. Can you afford that kind of loss?
Protrac over-the-tire track systems from McLaren Industries stop the loss. With Protrac, your skid steer has the right combination of flotation and traction in the worst conditions and keeps on working. In the rain. In the mud. In dirt, sand and snow. On steep slopes, loose rock and wet turf.
With Protrac, your skid steer works in conditions and performs tasks that would otherwise require a track loader or a small bulldozer. And because Protrac lowers your machine’s center of gravity, you get improved stability along with the added traction.
|
|
|
With the hot-vulcanized retreads for construction vehicle tyres, Rodos provides tyre expertise for standard sizes up to 33" as well for as smaller speciality tyres. Again, quality is also a top priority here. Just as is the case with Schelkmann, Rodos offers application-specific compounds combined with intelligent profiles for optimum tyre solutions. For all Rösler products, it is always the balance of performance, reliability and price that takes centre stage.
|
|
|
With the hot-vulcanized retreads for construction vehicle tyres, Rodos provides tyre expertise for standard sizes up to 33" as well for as smaller speciality tyres. Again, quality is also a top priority here. Just as is the case with Schelkmann, Rodos offers application-specific compounds combined with intelligent profiles for optimum tyre solutions. For all Rösler products, it is always the balance of performance, reliability and price that takes centre stage.
|
|
|
With the hot-vulcanized retreads for construction vehicle tyres, Rodos provides tyre expertise for standard sizes up to 33" as well for as smaller speciality tyres. Again, quality is also a top priority here. Just as is the case with Schelkmann, Rodos offers application-specific compounds combined with intelligent profiles for optimum tyre solutions. For all Rösler products, it is always the balance of performance, reliability and price that takes centre stage.
|
|
|
With the hot-vulcanized retreads for construction vehicle tyres, Rodos provides tyre expertise for standard sizes up to 33" as well for as smaller speciality tyres. Again, quality is also a top priority here. Just as is the case with Schelkmann, Rodos offers application-specific compounds combined with intelligent profiles for optimum tyre solutions. For all Rösler products, it is always the balance of performance, reliability and price that takes centre stage.
|
|
Solideal rubber tracks for Mini Excavators: Manufactured to the highest standard with natural rubber compounds for optimum performance.
SOLIDEAL LATEST TECHNOLOGY - The industry's most advanced metal pieces:
- Up to 50% less vibrations
- Reduced risk of de-tracking
- Reduced noise level
UNIQUE TREAD PATTERNS:
- Self cleaning Hauler Step
- Minimal soil disturbance
- Maximum traction
COMPLETE RANGE:
- Solutions to fit most machines on the market
More comfort + Less Machine Maintenance = Reduced Operating Cost per Hour & Downtime
Available Compounds: ERS; Grey Non Marking
For more details, please visit www.solideal.com
|
|
Solideal Over the Tire Tracks OTT: Manufactured to the highest standard with natural rubber compounds for optimum performance.
ATTACHMENT – non permanent solution to temporarily turn your skidsteer in a Compact Tracked Loader
- Fits all major skidsteer machines using 10x16.5 and 12x16.5 tires
- Ideal for muddy conditions, it improves: stability; manoeuverability; traction
- Lowers ground pressure (full floatation surface)
- Easy to mount and demount in 15 minutes
- Stone resistant carcass
- Low weight
- Low vibration – high comfort
- Patented friction design to prevent tire slippage and detracking = more fuel efficiency
- Includes complete kit and instructions
Available Compounds: ERS
For more details, please visit www.solideal.com
|
|
|
Rubber tracks produced with compound of rubber materials, metal iron core and steel cords include crawler tracks that are used as wheels of a variety of agricultural and constructional machines such as combines, trucks and small snowplows. Our rubber tracks help equipment to improve work efficiency on the soft ground and allow them to move in an environmental-friendly way. In particular, rubber tracks provide a driver with riding comfort by effectively minimizing noise as well as vibration when being used as a substitute of steel chains.
|
|
|
|
|
|
NEXT GENERATION™ Rubber Tracks for Mini-Excavators and Track Loaders
PROMOTION on Next Generation rubber tracks for selected makes and models excavators and track loaders!
Next-day delivery is available to most continental US locations. All McLaren rubber tracks are guaranteed to fit your machine.
At McLaren Industries we have invested years in research and development to create the highest quality metal and rubber compounds and structural track designs. The result is an entirely new class of high performance rubber tracks: McLaren's NEXT GENERATION™ Rubber Tracks.
NEXT GENERATION rubber tracks are continuous belt tracks that use ULTRA-SF steel cores. This technology balances strength and flexibility throughout the entire track to minimize wear and maximize strength and efficiency during the equipment’s operation.
The fiber mesh inside the tracks incorporates an advanced design feature, which provides better shielding and protection to the steel cores and wire cables. Multiple rubber compounds add insulation and cushioning to absorbs the shock and deliver a smooth ride!
NEXT GENERATION rubber tracks can handle up to 30% more weight! The tracks are designed to handle the weight of your equipment, its maximum work load and any adverse surface conditions it may work on!
|
|
NextGen TDF™ Series Track Loader Rubber Tracks
Introducing the next chapter in rubber track manufacturing:
Technology Design Formulation (TDF)™ (Patent Pending)
PROPRIETARY RUBBER COMPOUND FORMULA
The amount of rubber is not the only important feature of a rubber track. Weight alone is meaningless without quality. McLaren’s proprietary rubber compound formula extends track service life by as much as 50%.
|
|
Steel Tracks with Bolt-On Rubber Pads for Mini Excavators
THE NEW MCLAREN HYBRID™ TRACKS COMBINE THE STRENGTH OF STEEL WITH THE ADVANTAGES OF RUBBER.
Designed to handle the most extreme ground conditions, McLaren HYBRID tracks are virtually unbreakable and last twice as long as regular rubber tracks.
HYBRID Steel Tracks with Rubber Pads
The replaceable rubber shoes ensure excellent ground protection.
And most importantly, they are very easy to install on your rubber track machine without changing any undercarriage parts. Click on the Video Feed icon below to watch the Hybrid tracks in action on various surfaces.
|
|
|
Alliance agricultural tires are designed for top performance under all working conditions. They are manufactured for agricultural and forestry jobs, including occasional on the road driving. Before using them for any other type of work consult the manufacturer.
|
|
Specialization
This is a prominent unit specialized in high quality agricultural tyres. Thanks to the focus on the agricultural sector, Trelleborg Wheel Systems can develop solutions and products by rapidly interpreting market needs. It also offers its customers an attentive, technically competent service.
|
|
|
For anyone who works with articulated dumpers, nothing is more important than their vehicles' capacity to go everywhere, no matter what the terrain or weather conditions. The MICHELIN range for articulated dumpers allows you to find the solution best suited to your requirements of mobility and all-purpose operation. Being fitted with MICHELIN tires extends your machines' availability even further and makes them more productive.
|
|
The new radial tyres from Winstone are a logical consequence of Rösler’s retread expertise. Not all carcasses used meet our quality standards. Winstone falls back on new carcasses which are purchased with the highest quality standards applied by European brand manufacturers. Our retread expertise is then applied to the finishing process. Rösler stands for: quality, value for money tyres.
Winstone radial tyres are produced in the sizes 15.5 R25 to 26.5 R25 for various profiles.
|
|
A backhoe, a compact loader and an all-terrain telescopic handler all have very diverse uses (agricultural, public works or earthworks sites).
They consequently share a common demand for all-purpose capability and resistance in their tires.
This is why MICHELIN offers a range of agro-industrial tires catering for all applications, regardless of the nature of the terrain or the type of project. You are sure to find the solution that will increase the availability and productivity of your vehicles.
|
|
Backhoe Pneumatic Tyres
• The tread design was created to keep the tyre free of debris.
• Maximum traction under any conditions.
• Resistant to lateral skidding thanks to the diagonal design.
• Long-lasting thanks to the considerably deep treads as well as the excellent abrasion resistance of the mixture itself.
|
|
Compactors are used for preparatory or finishing work, primarily on public works projects. The compaction of soils and bitumen consists either in levelling them or, in the case of finishing work, surfacing them for road construction.
Tire-mounted compactors offer greater operator comfort, manoeuvrability and mobility, but their tires are subjected to significant stresses (high temperature of the materials).
MICHELIN has therefore developed a specific solution adapted to these stresses
|
|
ELTOR 3 EL
• Smooth tread designed for rollers which sustain drums or cylinders of any kind.
• Intended for all applications in which vibrations must be avoided.
• For non motorised situations where grip is unnecessary.
• Smooth treads, as opposed to tread bars, are inherently more resistant to tears.
|
|
Solideal, designers and manufacturers of the world’s most innovative, heavy-duty, construction tyres. Designed and manufactured to withstand the construction industries toughest applications.
Heavy-duty construction, innovative tread design combined with cut and tear resistant tread compounds for optimum life time, traction, stability and performance.
|
|
CONSTRUCTION MACHINARY
The wide base tubeless truck tire is designed for special service on cranes, dump trucks and excavators. Excellent traction in all working conditions is provided, as well as resistance to side slip. For best running wheels of vehicles engaged in on-the-road jobs, it is recommended to mount the tires in the opposite direction than usual.
|
|
|
|
Tires and tracks for construction equipment
