|
|
There is a wide range of products for printed circuit boards (PCB'S) which aid the support, spacing, locking and guiding of the board within electronic applications.
The majority of supports are designed to be installed manually, by hand, and do not require automated assembly equipment.
The professional circuit board hardware products are available in a wide array of material. Custom parts are available from our extensive design service. Please contact you local Richco office to discuss your requirements.
Typical applications include in the Automotive industry, Telecommunications equipment, Security systems, Office equipment, White goods and Brown goods markets. |
|
For this peelable shim, Jicey has developed a marking concept that immediately shows which side is to be peeled according to the thickness (0.025 - 0.050 - 0.100 mm).
This patented concept consists in the marking of the elementary thickness directly on the centre of the shim, which is visible by transparency over the entire top thickness. The Viewtek ® process also uses a colour code for each of the proposed thicknesses. This makes it extremely user- friendly and enables two different thicknesses to be positioned without confusing them. |
|
OVERVIEW
INTERCOMPOSITE® is a LAMECO patented composite material made of a glycol polyethylene terephthalate film obtained by a slit-die extrusion process, followed by a double-drawing.
ADVANTAGES
Lightness
As an answer to a lightening requirement ( for more autonomy, more useful carrying capacity... ). INTERCOMPOSITE®* is one of the lightest of laminated materials.
Good physical, mechanical, thermic and chemical characteristics
Adaptation to curved shapes
INTERCOMPOSITE® has the property to immediately adapt itself to most curves without anyloss of precision. And this on the very assembly site.
Facility and rapidity of use
You can peel INTERCOMPOSITE® with your forefinger (you don't need any tool).
Low cost
INTERCOMPOSITE® is the least expensive of all our laminated materials. |
|
OVERVIEW
X.FIBER® is a laminated material, designed and patented by Daniel GASTEL.
This composite material comes in the form of woven fiber sheets, which can be manufactured in several different ways:
- glass, carbon, aramide, ceramic fibres or
- any combination of two or more of these different fibers.
The sheets are held together by a heat-hardened resin, the resulting material delivers both very high technical performance and excellent peelability.
ADVANTAGES
Lightness
When the demand is for lighter materials, X.FIBER® proves itself by far the lightest of laminated materials (5 1/2 times lighter than steel!).
Strength
Being both lighter and stronger, it can be used to great advantage as a replacement for carbon and stainless steels..
Endurance
It is comparable with laminated metals, and can be used to replace INTERCOMPOSITE® in use at temperatures above 266°F (130°C).
Its mechanical properties remain unaffected by the rise in temperature.
Rapidity
The sheets can be peeled by hand, without the need for tools of any kind.
Ingenuity and Economy
Once they have been peeled, the sheets remain flat and free of deformation. They remain fully re-useable. |
|
Peelable shims are made up of a series of individual thin metal strips placed one on top of the other and glued over their entire surface to form a compact laminated block.
These individual strips can be very easily separated and removed to give the desired overall shim thickness. This procedure avoids the need for machining and adjustment associated with solid single component shims. it also replaces separate thin metal strips piled one on top of the other, thus avoiding "expansion". The quality of Althermill shims lies in the parallelism of the laminated layers and the accuracy with which the thickness can be adjusted. |
|
Any mechanical assembly requires machining tolerances. In a complex assembly of several hundred or thousand parts the tolerances of each part are added up. This is why "clearances" of several millimeters are found once the assembly is completed.
These clearances have to be compensated in order for the assembly to fulfill its function.
To compensate assembly clearances, Lameco offers a solution, definitively technology-oriented : the laminated shim.
Principle : it is designed from metals or composites which have the property of "peeling" in the thickness direction into thin strips of a few hundredth millimeters.
LAMINATED SHIMS ADVANTAGES
Time saving, precision unquestionably improved, saving of sanding machine, all these elements account for the laminated shim's excellent quality/price ratio.
Speed and simplicity : peel laminated shims with forefinger or scalpel. No need for special tools, no grinding.
Precision : laminated shim guarantees optimal precision (which pilings cannot achieve in any way.)
Flexibility : they satisfy standards in wide range of industrial machine and assembly line applications |
|
| They are made up of foil metals glued together, from a laminar material of solid aspect. Each foil can be easily stripped off to the desired thickness. |
|
PRECISION BRAND Laminated Brass Arbor Shims are made of cold rolled, half hard CDA 260 alloy with .002" laminations
Just peel off layers to needed thickness
Allows you more accuracy on-site
Composition 2, Type 1, Class 1
I.D./O.D. Tolerances /- .008
Thickness tolerances are same as flat sheets
Sold by the piece
Laminated Aluminum Arbor Shims available as special order |
|
PRESENTATION
LAMECO is the first to associate an electronic identifier to the laminated shim, allowing it to communicate.
Principle : a chip is inserted within the shim's layers. Next, the chip is coded : the shim's identity is stored in it. From that moment on, the information contained in the chip can be deciphered by a hand-held reader.
ADVANTAGES
Security
The electronic identifier is not rewritable : thus, one cannot falsify information regarding the Qar.X.DATA-SHIM®.
It is physically inviolable : any attempt to extract it will cause it to self-destruct.
It solves the problem of the main inconvenience of stamp-marking : the superficial folios no longer being the sole medium for identification of shims, as many shims as desired can be peeled, without as much as risking loss of their identifying data.
The electronic identifier provides protection against collision with other chips that could be present in the system.
Flexibility
The electronic identifier can be remote-read :
when the Qar.X DATA-SHIM® is installed.
when the equipment in which it is located is in service.
Simplification
Assembly as well as maintenance are simplified.
As a matter of fact, a general reader makes it possibles to identify all Qar.X DATA-SHIM® present in a unit of equipement.
Universality
The electronic identifier can improve all your shims.
Traceability & Paperless Documentation |
|
Our range of PROFESSIONAL LED hardware components are designed to protect and support LED's and also aid in the transmission of professional light to front professional panel indicators. Our LED Spacers fit most standard LED's and can raise the LED to the desired position on the PCB, minimising shifting, uniformity and aiding ease of installation especially for surface mount applications.
Holding the LED at the desired angle position on the front panel is another application area that Richco has LED solutions for, which ensures that the LED is held securely in position.
Directing light from the PCB to the front panel from awkward PCB mounting positions can be solved with Richco's range of solid light pipes, which are ideal for use with surface mount LED's. |
|
SPIROL® Series SP100 and SP150 Spacers are used as stand-offs, distance bushings, sleeves, axles and pins. They replace cut-off tubing, tubes, ferrules, grommets and turned parts. The most typical application uses the spacer to separate two components. The assembly is joined by a screw dropped through the inside diameter of the spacer.
Specials: Spacers can be customized to meet your specific requirements. Other special order products include Tension Sleeves, Short Spacers, Tubular Rivets, Shoulder Rivets and Suppliers of connectors. Minimum orders apply. |
|
| The threaded cylindrical spacer is available in different materials. It is the universally used spacer for electronics, electrical systems, and mechanical applications. The glass-fibre reinforced version allows for greater durability for mechanical apllications while retaining its dielectric properties. This spacer is available from stock in the most common sizes and can also be customized to specific orders. |
|
Made of high quality Steel Shim
Finish can be #2 bright or matte
Keyways conform to American standards
Packaged in air tight poly bags
10 pieces per professional bag (except assortments)
Special sizes, materials and bulk quantities available on request
Used for fast accurate spacing of milling cutters suppliers, gang cutters, industrial saws, slitting blades and grinding tools |
|
OVERVIEW
Any mechanical assembly in working order generates vibrations that are source of harmful frequencies.
To bring an answer to this main drawback, Daniel GASTEL designed and patented a new laminated product called SILENTLINE®.
SILENTLINE® is a composite of metal and synthetic material, which has the immense advantage of dispersing - therefore dampen - frequency transmission. And this to a very large extent. Product picture here.
ADVANTAGES
I. The cost of SILENTLINE® laminated shims is practically equivalent to that of shims made of other laminated materials. So there is no economic obstacle to their use.
II. The mechanical characteristics of laminated shims are improved with this material.
CETIM tested two probes, both in 2 mn thickness :
a) The first one, conventional, entirely consisting of peelable metal leaves: achieved Vickers value = 440 MPA.
b) The second one manufactured in the new material : achieved Vickers value = 510 MPA.
III. SILENTLINE® laminated shims which thus require less maintenance and are less subject to wear.
PERFORMANCES
Tests carried out by CETIM on this new material show its capacity to tone down - in a spectacular way - the two consequences of a harmful frequency emission :
- Absorption or dampening and dispersion of 45 to 50 % of the amplitude
- Reduction by 50 to 55 % of the emission duration.
This is therefore a high performance material. |
|
Round spacers
Special spacers
Hollow pins
Retaining spacers
Metric round tapped spacers
Metric hex tapped spacers
Metric round tapped / threaded spacers
Metric hex tapped / threaded spacers
Saddle spacers |
|
- STAND OFF
- ROUND SPACER FEMALE/FEMALE
- HEXAGONAL PILLAR FEMALE/CLIP
- HEXAGONAL PILLAR MALE/FEMALE
- HEXAGONAL PILLAR MALE/MALE
- HEXAGONAL PILLAR MALE/CLIP
- BUSCHES |
|
| This tube spacer made off nickel plated brass is a versatile universal assembly element for use in all sectors. Available in lengths from 1mm-40mm; pieces can be custommade. The attractive design in nickel-plated brass allows for decorative applications such as professional displays, furniture, ornamention, etc.. Special materials can be used and available on order. |
|
| A separable shim is an adjusting shim in which the strips are glued together at discrete points along their edges. This procedure can be used where the thickness of the individual strips becomes too great to allow easy peeling. In certain circumstances, this principle can be more effective than traditional peelable shims, as Shimpack has the advantage of allowing each component removed to be used on its own. |
|
Arbor Spacers & Shims
Aluminum Shim Stock 6" x 100" Rolls
Blue Tempered Shim Stock
Brass Shim Stock
Color Coded (Plastic) Shim
Copper Shim Stock 6" x 100" Rolls
Die Button Shims
Laminated shim Stock
Lengthening & Shortening Shims
Slotted Shim
Stainless Steel Shim Stock
Steel Shim Stock
Sof' Industrial shoe® Shim
Speed Scribe
|
|
| Adjustment or ground shims, they are available in all required shapes, materials and thicknesses for high precision by stacking (from 0,01mm to several tens of millimetres). |
|
Metal foil sets according (to your requirements)
Tailor cutting of foils
Les feuillards (en bobine ou au mètre linéaire) |
|
R40-600 Product Family
Description:
M4 Clearance Circular Brass Spacer
Features:
6.35mm Outer Diameter
Finish:
Nickel
|
|
| ... products without technical information |
| |
|
|
Shims, Spacers
