|
|
Each cylinder with one key
silver steel with polyamide
grip black,
screw and nut m.s. zinc pl.,
key removable in both
positions
L-Handle,
suitable for KABA-cylinder type 1036 for standard locking or
master key system on request
|
|
The special antimicrobial material EBP.SAN is made out of, stops any deposit of bacteria, mildew and fungi, offering a sanitized effect on the surface.
Tests carried out on material samples confirmed the stability of the antimicrobial action after several cleaning cycles at high temperatures with soap and solvents.
The great resistance to high temperatures of the antimicrobial additive allows this handle to reach sterilisation temperatures (130°C).
|
|
|
|
|
|
|
Tubular handles with switch Emile MAURIN the tubular handles with switch were designed for unlocking/releasing of the safety devices of the sliding doors and the rotary/revolving doors. - Optimized Ergonomics (with the switch directly with the door) - Assembly and installation simplified - Functions additional possible directly on the handle and connected to the door: switch of stop urgently OFF, push-buttons START or RESET, luminous indicators All the switches, push-buttons and indicators, normally installed on external panels or rising, here are directly integrated on the tube of the handle. While unbolting the device with the inch, the same hand can open the door. According to your applications, various versions are deliverable with a switch of stop urgently OFF or 2 push-buttons being able to be used for example, one for START and the other for RESET. The version with 1 only push-button implies that it is about an element of contact. The 2 indicators are integrated in the case circuit breaker and they can post various operating conditions, allowing, for example, with the operator to make function or control its machine directly since the door. The second push-button can be used as element of contact. The tubular handles are out of aluminium stripped black chechmate or anodized. The side supports in zamac are stripped black chechmate. A kit with the caps of red, green and blue color is provided for each button.
|
|
Functional Handle
with Emergency
Stop FG5
Material and
surface treatment:
Tube ø 30 x 1,5 mm of aluminium AlMgSi 0,5, black powder coated with fine structure. Tube holder and cap of polyamide PA6, black with fine structure.
Function element:
Emergency Stop.
FG5-20
2 NC contacts; UL approval.
FG5-21
1 NC contact and illumination by red LED; UL approval.
Protection class:
The protection class of the functional handles conforms to IP 65.
Connection:
Connecting cable 5 m readymade, lead out of the tube holder.
Special designs:
Other handle lengths on request.
|
|
Position indicators and handwheels of SIKO for individual applications.
Handwheels with integrated position display afford to shift and display axial movements. For actually reading SIKO provides a spectrum of variable scales depending on particular transmissio.
|
|
Material:
Black duroplastic PF 31;
hubs in steel, nickel-plated or stainless steel 1.4305, natural finish;
grip revolving, steel parts nickel-plated or in stainless steel 1.4305, natural finish
Surface finish:
Deburred and high-polish finish
Note:
The Handwheel and grip will be delivered unassembled.
On request:
Other locating holes.
|
|
Aluminum Angular Solid Handwheel
Plastic Solid Handwheel with Revolving Handle
Aluminum Angular Spoked Handwheel
Plastic Solid Handwheels with Revolving Handle
Aluminum Finger Wheels
Plastic Solid Handwheels with Finger Grips Revolving Fold Away Handle
Aluminum Finger Wheels
Plastic Solid Handwheels with Finger Grips Revolving Fold Away Handle
Aluminum Finger Wheels
Plastic Three Spoked Handwheels
Cast Iron Angular Spoked Handwheels with Handles
Plastic Three Spoked Handwheels with Revolving Handle
Nylon, Angular Three Spoked Handwheels
...
|
|
MISUMI provides more than 1 Million mechanical components for the assembly automation. We delivery components europewide in averagely 6-8 days GUARANTEED delivery from the day of purchase, stock items available from 2 days delivery.
MISUMI 24/7 Web Ordering System (WOS) represents a full-fledged e-Commerce solution, which you can use, for the first time, independently from the catalogue in paper form, to configurate MISUMI products, submit quotations and place orders.
For more information about MISUMI, WOS or for ordering a catalogue please visit: www.misumi-europe.com
MISUMI - Precisely Meeting Your Demands
|
|
Insert foot
Group 047
# Made from PVC
# Colour: black
# Prevents sliding and reduces vibration
# Easy mounting through simple design
# Also available in assortment box (group 019)
Protective buffer
Group 048
# Made from PVC
# Colour: white, black
# Soft yet very strong flexible bumper
# Easy mounting through single screw or push rivet
# Check our extensive ranges of nylon or metal screws and nuts
|
|
|
Knobs, buttons and T-handles for throttle, choke, valve, shut down, vent control and more in a variety of applications from construction to aviation.
|
|
WDS has a comprehensive range of handwheels, handles and knobs. These come in a variety of sizes and styles plus many variations in materials from Stainless Steel and thermoplatics that are ideal for the Food Industry, plus Cast Iron and Bakelite for standard industry applications. There are also a range of indexing handles and hand knobs in a variety of RAL colours.
As with most WDS standard parts 3D models are available on-line in most popular formats.
|
|
|
Indexable levers EMILE MAURIN the indexable levers are components usually used for tightening. The very broad range is composed of indexable tapped insert levers (steel or stainless) and of indexable threaded rod levers (steel or stainless). A great choice of material (for the body): zamac, technopolymère, steel and stainless also Discover: indexable stage levers with a sole assembled on a ball bearing right indexable levers (the handle is not tilted of 20°)
|
|
ART. A148
MATERIAL:
Reinforced polyamide.
Oils and greases resistant.
SURFACE:
Satin.
COLOUR:
Black (RAL 9011).
CENTRAL CAP:
Grey polyamide (RAL 7035 code 13).
MAIN INSERT:
Brass blind threaded bush.
SPECIAL REQUESTS:
• It is possible to supply the inserts in different
materials, on request and for quantities.
|
|
The product family Adjustable Clamping Levers covers the following article groups:
- EH 2439. Adjustable Clamping Lever with inner parts from stainless steel (with female thread / screw)
- EH 2440. Adjustable Clamping Lever (with female thread / screw)
- EH 2442. Adjustable Clamping Lever axial bearing (with female thread / screw)
Advantages of axial bearing:
- Double clamping force with same lever size, by reducing the surface
friction.
- Protection of work piece by fixed locating face.
- Little settling due to higher pre-clamping force of bolt, e.g. thread.
|
|
Material:
Handle in die cast zinc to DIN 1743,
steel parts quality class 5.8 or
steel parts in stainless steel 1.4305
Surface finish:
Handle plastic-coated.
Steel black oxide finish.
Stainless steel natural finish
Note:
Standard colours are:
black satin finish, orange RAL 2004.
On request:
Other external threads, screw lengths, colours and special versions.
|
|
Size EX43 = 0.27 EUR
Size EX65 = 0.34 EUR
Size EX83 = 0.46 EUR
Size EX104 = 0.69 EUR
New style plastic clamping handles 20-40% cheaper then your current parts.We are offering direct factory prices through our warehouse in Czech Republic.
Introducing new clamping handles with new ergonomic design, robust construction and lowest price on the market. Our size EX83, EX65 are the best sellers for the quality, design and price.
We are also capable to make any other part for much lower cost.
We are looking for smart direct buyers and resellers worldwide.
Please, visit our web page www.elementrix.net to see the range of our products and feel free to ask for the quotation.
Material: Nylon GF30, steel,brass inserts
|
|
|
|
|
|
ART. D602
TWO-SPOKE CONTROL HANDWHEEL WITH REVOLVING FOLDING
HANDLE AND LOCKING PISTON
MATERIAL:
Reinforced and stabilised polyamide.
Oils and greases resistant.
SURFACE:
Satin.
COMPLETE HANDWHEEL COLOUR:
Black (RAL 9011).
CENTRAL CAP:
Grey polyamide (RAL 7035 code 13).
ALTERNATIVE CAP COLOUR:
Orange (RAL 2004 code 02).
Blue (RAL 5015 code 07).
Yellow (RAL 1021 code 10).
Red (RAL 3000 code 16).
Green (RAL 6024 code 17).
Black (RAL 9011 code 01).
LOCKING PISTON KIT:
(1) PA6+GF hole cover ring. Black (RAL 9011). Push-fit assembly. Removable.
(2) PA6+GF piston holder. Black (RAL 9011). Assembly by means
of two self-tapping, galvanised steel screws, screwdriver head 3.5x30.
(3) PA6+GF gear stick d. 26 with M4 brass female threaded insert
and positioning brackets. Black (RAL 9011).
(5) PA6+GF gear stick support with positioner. Black (RAL 9011).
(6) Galvanised steel return spring.
(7) Galvanised steel washer.
(8) Galvanised steel locking piston. Seat for Allen wrench no. 5 for fastening.
Piston stroke 10 mm. Useful projection from handwheel 8 mm.
INSERTS:
(1) Customised galvanised steel through-hole insert.
(4) Black-oxide treated hexagon socket button head screw ISO 7838 for fastening handle.
(9) (art. D602) Black-oxide treated steel insert with hexagonal threaded through-hole.
|
|
Spring-loaded plunger that locks in retracted position. To lock, pull knurled knob back and turn 90°. Standard plunger has a slight taper on plunger tip for easy alignment. Also available with a radiused Delrin plunger (slightly larger plunger diameter and lighter spring force). Available in steel or stainless steel.
|
|
|
The range fingers of indexing EMILE MAURIN: nearly 70 different versions! Fingers of indexing steel or stainless Fingers of indexing with or without device of blocking Fingers of indexing to button polyamide, handle, ring or without head Fingers of indexing not metric or not fine Fingers of indexing standard or miniature height Fingers of indexing to be screwed, weld or with platinum… etc… The models with device of blocking are used when the pin of centering must be retracted. Blocking is carried out by a rotation of the head of 90°. The range proposes also accessories for the fingers of indexing: brace, supports and casing of positioning
|
|
The product family Index Plungers covers the following article groups:
- EH 2211. Index Plungers „mini index“,
- EH 2211. Index Plungers with hexagon collar,
- EH 2211. Index Plungers with hexagon collar and locking,
- EH 2212. Index Plungers with hexagon collar,
- EH 2212. Index Plungers with hexagon collar and locking,
- EH 2212. Index Plungers without hexagon collar,
- EH 2212. Index Plungers without thread, weldable,
- EH 2212. Index Plungers with hexagon collar, short
- EH 2212. Distance Collars for Index Plungers,
- EH 2212. Index Plungers with screwed flange,
- EH 2212. Index Plungers, simple finish,
- EH 2212. Index Plungers for thin-walled pieces,
- EH 2212. Index Bolts,
- EH 2212. Securing Bars for Index Bolts,
- EH 2212. Index Bolts with mounting flange,
- EH 2213. Precision Index Plungers with cylindrical support,
- EH 2213. Precision Index Plungers with tapered support.
The Index Plungers / Index Bolts are used for indexing purposes.
|
|
SPRING PLUNGER SLOTTED
SPRING PLUNGER, SLOTTED AND LONG-LOK SECURED
SPRING PLUNGER HEX SOCKET AND PRESSURE PIN
SPRING PLUNGER, HEX SOCKET, LONG-LOK SECURED
|
|
Small five-lobed phenolic hand wheels that are useful as control knobs or clamping knobs. Moulded-in steel hub, blank with a pilot hole.
|
|
|
Boutons EMILE MAURIN the buttons is components usually used for tightening. The range is very broad as well on the level of the forms as of the matter, it is composed of: Buttons brace Buttons star Buttons triangle Buttons with prismatic or knurled relief Buttons with lobes, with three arms Buttons mushroom Buttons conical, oval, warhead or balls the buttons are tapped (of M4 with M20) or with a threaded rod steel or stainless (of M5 with M16). A large variety of material: technopolymère, bakelite, steel, cast iron, aluminium and stainless EMILE MAURIN propose also buttons with technical characteristics: Buttons brace technopolymère with stage with a sole assembled on a ball bearing Buttons star technopolymère with safety pin: what allows unscrewing only by the authorized person equipped with the key.
|
|
|
GRIP HANDLES: cylindrical, conical, revolving ribaltabili, with fixed hinge; GRIPS: pointed, to botticella, arms for levers, HANDLES: to pulling, for hatch boiler; POMOLI to sphere, KNURLS: for push-buttons, lever change.
|
|
|
Alliance Plastics offers a wide assortment of standard industrial knobs for almost any application requirement. Knobs are available in three, four, five and six-lobe style as well as grip, ball, fluted and high and low profile versions to accommodate many hand sizes and preferences. Knobs are available in multiple materials including polypropylene, Phenolic and soft-touch EVA for your comfort and ergonomic needs.
|
|
Material:
Black thermoplastic, bush and threaded bolt in stainless steel 1.4305
Surface finish:
Bush and threaded bolt natural finish.
On request:
Other colours or designs, such as company logos.
|
|
This product group covers the following standard parts:
- Sensing Elements with sensor adaptor (EH 2501.),
- Sensing Elements with actuating bolt (EH 2502.),
- Tapered Shaft Hubs (with / without lock nut) (EH 2505.),
- Set Collars with sensor adaptor (geschlitzt / geteilt) (EH 2507.),
- Quick Plug Couplings (with / without screwed flange) (EH 2510.),
- Quick Plug Couplings with angular and radial offset compensation
(EH 2510.) and
- Heigth Adjusting Elements (standard, high, orienting) (EH 2512.).
|
|
Machine and control housing handles
Stable aluminium handles with high dimensions for machines and housings in different anodizing versions or powder coated.
|
|
|
|
Handwheels, Levers, Handles, Maneuvering parts
