|
|
|
|
|
|
ART. C196
SOLID CONTROL HANDWHEEL
MATERIAL:
Reinforced and stabilised polyamide.
Oils and greases resistant.
SURFACE:
Satin.
COLOUR:
Black (RAL 9011).
CENTRAL CAP:
Grey polyamide (RAL 7035).
ALTERNATIVE CAP COLOUR:
Orange (RAL 2004 cod. 02).
Blue (RAL 5015 cod. 07).
Yellow (RAL 1021 cod. 10).
Red (RAL 3000 cod. 16).
Green (RAL 6024 cod. 17).
Black (RAL 9011 cod. 01).
MAIN INSERT:
Zinc plated steel right through bored bush with H7
tolerance.
For fixing systems, or execution of tabs or square holes,
please refer to the technical notes attached to the
catalogue.
SPECIAL REQUESTS:
• It is possible to supply the inserts with d1 diameterby
customer design, on request and for quantities.
• It is possible to supply the inserts in different materials,
on request and for quantities.
• It is possible to supply the inserts with different
treatment-finishes, on request and for quantities.
• It is possible to supply the complete handwheels with
colours as shown in the table at page 11, on request and
for quantities.
|
|
Material: High-resilience polypropylene based (PP) technopolymer. Resistant to solvents, oils, greases and other chemical agents.
Polyamide based (PA) technopolymer in Ergostyle colours, matte finish; supplied not assembled, push-fit assembly, removable by a screwdriver.
Available also as accessory sold separately (see boss cap table).
|
|
|
|
|
|
|
The range Emile MAURIN is not exhaustive. To answer specific needs for your production or particular technical requirements Emile MAURIN proposes special executions to you, after study or according to your plans. Considerable our machine elements lend itself easily to multiple modifications. Matter, design, dimensions, mode of gripping, type of fixing, color….are as many parameters as it is possible for us to adapt to your application. Fingers of indexing, handles clamps, levers indexable, pins with balls, cranks, screws knurled, buttons, feet of machines,… are elements very snuffed by our customers whom we modify or whom we regularly personalize for them. Additional machinings are realizable on the metal parts of our elements (drilling, tapping, undercutting, stitching, keying…) Many heat treatments and coatings can be applied to our components (Chromium plating, browning, zinking, nickel plating, anodization,…) Powerful installations of stripping, also enable us to standardize the design of the parts which you use, to see to personalize them with your colors according to RAL'S of your choice. A machine of engraving to the laser, gives us also the possibility of `customiser' our elements with your logo!!! A unit of bending of high precision offers multiple possibilities of special achievements on the sections and tubes aluminium used for our handles clamps, as well on the level lengths, distances between centres, heights as radii of curvature. Benefit from our knowledge to make to differentiate you.
|
|
|
For more than 100 years , Ganter offers a wide range of standarized components for industrial machines, components such as handles, levers, knobs and handwheels.
|
|
|
This product group of the Standard Parts-Catalogue covers operating elements like Adjustable Clamping Levers, Handwheels, Palm Grips, Palm Grip Screws, Star Grips, Star Grip Screws, U-Handles, Clamping Levers, Ball Knobs, Knurled Thumb Screws, Knurled Nuts, Machine Handles, etc.
|
|
Knurled Nuts
Knurled Thumb Screws
Quick-Acting Knurled Nuts
Star and Palm Grips
Ball Knobs
Handwheels
Machine Handles
Non-Adjustable Clamp Levers
Control Handles
Triangular Star Grips
Five Lobe Grips
Stirrup-
Shaped Handles
Machine and Apparatus Handles
Tube Handles
Profile Handles
|
|
KNURLED NUT STEEL, STAINLESS STEEL
NUT
DISC GRIP FOR HEX SOCKET SCREW
BUTTERFLY HEAD FOR HEXAGON SOCKET SCREW
SPINDLE NUT
|
|
|
Push-pull levers and joysticks used for drive engagement, remote valve actuation, vibrator controls, hitch release, parking brakes in mobile, industrial and agricultural equipment. Unidrum push-pull and pull-only throttles available.
|
|
Stoppers and elements of operation - synthetic products
Hat of protection out of polyethylene for round tube
Ends for tube square, rectangular, oval, with wings...
|
|
ART. D161
TAPERED HANDWHEEL WITH SMOOTH OR THREADED HOLE
MATERIAL:
Reinforced polyamide.
Oils and greases resistant.
SURFACE:
Satin.
HANDWHEEL COLOUR:
Black (RAL 9011).
MAIN INSERT:
TD Version: Zinc plated steel blind
bored bush with H7 tolerance.
TM Version: Zinc plated steel blind
threaded bush.
For fixing systems, or execution of tabs
or square holes, please refer to the technical notes
attached to the catalogue.
SPECIAL REQUESTS:
• It is possible to supply the inserts with
d1 diameter by customer design, on request
and for quantities.
• It is possible to supply the inserts in different
materials, on request and for quantities.
• It is possible to supply the inserts with different
treatment-finishes, on request and for quantities.
|
|
Size EX160 = 2,37 EURO
New style hand wheel 20-40% cheaper then your current parts.
Introducing new hand wheel with new ergonomic design, robust construction and guaranteed lowest price on the market. Our size EX160 is the best seller for the quality, design and price.
We are also capable to make any other part for much lower cost.
We are offering direct factory prices from our warehouse in Czech Republic.
We are looking for smart direct buyers and resellers worldwide.
Please, visit our web page www.elementrix.net to see the range of our products and feel free to ask for the quotation.
|
|
|
|
|
|
Bülte handles are easily and quickly assembled for a perfect finish.
These polyamide (Nylon) handles are resistant to corrosion, impact and common chemicals; they have good dimensional stability and high thermal resistance.
Several models of handle are available, for use with self-tapping screws, hex head and cross head screws or with an insert for screwless mounting for applications such as gates and caravans, as well as industrial applications in general.
Wide range includes:
- Handles (flat profile) can be attached with M6 and M8 hex head screws. Available in two heights (30 and 35 mm) and lengths from 110 to 151 mm. Standard colour is black.
- Standard round handles are suitable for self-tapping screws, or with insert for screwless mounting. Four different heights (15, 16, 20 and 21 mm), lengths from 32 to 120 mm. Standard colours are black and white. The 16 and 21 mm heights are manufactured in Polyamide, the 15 and 20 mm heights in Polystyrene (very good dielectric properties, resistance to low temperatures and negligible absorption of humidity).
- Round handles are suitable for M8 hex head or cross head screws. Available in two heights (42 and 60 mm) and lengths from 150 to 600 mm. Standard colour is black. They can be all plastic or plastic & aluminium.
A catalogue detailing our full range of products is available free, on request.
|
|
Examples:
Economy plus
Handle Series EC
Material:
Handles of polyamide PA6, glass
ball reinforced.
Designs:
Black, similar to RAL 9005, or orange, similar to RAL 2009, semi-matte with fine-grain structure for cylinder headsocket screws M8 DIN 912 or
countersunk head socket screwsM6 DIN 7991.
Slanting Polyamide Handle SP:
Material:
Handle of polyamide PA6, glass ball reinforced with threaded brass bushings.
Designs:
Black, similar to RAL 9005 or light grey, similar to RAL 7035, semi-matt with finegrain structure.
|
|
Size EX120 = 0.257 EURO
New style bridge handle 20-40% cheaper then your current parts.
Introducing new bridge handle with new ergonomic design, robust construction and guaranteed lowest price on the market. Our size EX120 is the best seller for the quality, design and price.
We are also capable to make any other part for much lower cost.
We are offering direct factory prices from our warehouse in Czech Republic.
We are looking for smart direct buyers and resellers worldwide.
Please, visit our web page www.elementrix.net to see the range of our products and feel free to ask for the quotation.
|
|
|
Alliance Plastics offers a broad range of handles and pulls that are available in multiple styles, sizes and materials to meet many application requirements. Indexing Handles are available in traditional nylon with push-button ratcheting and soft-touch material for comfort and style for your ergonomic needs. Bridge handles and pulls come in many styles for most any application and need. Our bridge handles accept optional colored caps for aesthetic appearance or color-coding requirements.
|
|
Type : Material : Hardness : Surface Treatment RoHS CAD Data
NCRM Knob: Nylon 6, Thread: 12L13 Steel - Bright Chromate Compliant
NCRF Knob: Nylon 6, Thread: 12L13 Steel - Bright Chromate Compliant
|
|
MISUMI provides more than 1 Million mechanical components for the assembly automation. We delivery components europewide in averagely 6-8 days GUARANTEED delivery from the day of purchase, stock items available from 2 days delivery.
MISUMI 24/7 Web Ordering System (WOS) represents a full-fledged e-Commerce solution, which you can use, for the first time, independently from the catalogue in paper form, to configurate MISUMI products, submit quotations and place orders.
For more information about MISUMI, WOS or for ordering a catalogue please visit: www.misumi-europe.com
MISUMI - Precisely Meeting Your Demands
|
|
|
WDS stock a range of location and positioning parts predominantly targeting those wishing to position or locate a workpiece for a machining operation. We stock a wide range of parts ex-stock, many available in 3D format to suit your native CAD Format. We also stock clamps - see the Clamps link!
|
|
CLOSED KNOBS / OPEN KNOBS
All he knobs have been realized with a particularly soft material to facilitate the hand grip.
The special design allows to soothe the vibration in order to assure the best comfort during the use.
|
|
EPR/F-SH
Flush pull handle with flap
(assembly by means of screws)
|
|
ART. K500
INDICATOR SEAT CLOSING COVERS
MATERIAL:
Reinforced and stabilised polyamide.
Oils and greases resistant.
SURFACE:
Satin.
PRIMARY COVER COLOUR:
Black (RAL 9011).
SECONDARY COVER COLOUR:
Grey (RAL 7035 cod. 13).
ALTERNATIVE CAP COLOUR:
Orange (RAL 2004 cod. 02).
Blue (RAL 5015 cod. 07).
Yellow (RAL 1021 cod.10).
Red (RAL 3000 cod.16).
Green (RAL 6024 cod.17).
Black (RAL 9011 cod. 01).
COVER FIXING METHOD:
Self push-fit. Removable.
SPECIAL REQUESTS:
• It is possible to supply colours as shown
in the table at page 15, on request
and for quantities.
|
|
Features and applications
Gravity position indicators are suitable with handwheels or knobs on spindles with horizontal or max 60° inclined axis
|
|
New style revolving handle 20-40% cheaper then your current parts.
Introducing new revolving handles with new ergonomic design, robust construction and lowest price on the market. Our size EX68 are the best sellers for the quality, design and price.
We are also capable to make any other part for much lower cost.
We are offering direct factory prices from our warehouse in Czech Republic.
We are looking for smart direct buyers and resellers worldwide.
Please, visit our web page www.elementrix.net to see the range of our products and feel free to ask for the quotation.
|
|
SNAP-LINE products allow installation without screws or tools.
Advantages:
- Save up to 90% of your hardware installation time
- Withstands vibration
- Blind assembly
- Zero defect assembly design
|
|
Stainless steel handles
For all areas with high corrosive resp. chemical demands as medicine technology, wet areas, chemical installations and the food industry.
|
|
- 1, 2 and 3 point cams
- Electronic option
- Cylinder or inserts
- Indoor and outdoor
- Zinc die-cast, polyamide or stainless steel
|
|
Locking set polyamide black, insert zinc die chrome pl.,
fixing material m.s. zinc pl.
All round cylinders and inserts have spring loaded cams
for RH and LH
Profile half cylinder DIN 18 252
keyed different 2100-B9
keyed 110319 2100-B11
(Master key system on request)
Profile half cylinder
placed at disposal by the user 2100-06-aa
Profile half cylinder with
EMKA-locking-system
keyed different 1109-B24
keyed EK 333 1109-B16
|
|
ART. L270
T HANDLE WITH THREADED INSERT
MATERIAL:
Reinforced polyamide.
Oils and greases resistant.
SURFACE:
Satin.
COLOUR:
Black (RAL 9011).
MAIN INSERT:
Brass blind threaded bush.
SPECIAL REQUESTS:
• It is possible to supply the inserts in different
materials, on request and for quantities.
• It is possible to supply colours as shown in
the table at page 19, on request and for
quantities.
|
|
| ... products without technical information |
| |
|
|
Handwheels, Levers, Handles, Maneuvering parts
