|
|
|
The Smokemaster® M67 is a self-contained multi-stage media air cleaning system / industrial air filter designed for general background cleaning of dust, smoke, soot or other airborne particulate. The M67 industrial air filter is a good choice for light duty applications such as sanding, buffing, welding or autmotive refinishing at a rate of up to 1980 cfm.
|
|
Daikin’s 4th generation air purifier offers improvements at all levels.
Allergy sufferers and others who appreciate the value of clean air can take heart. With the MC707 Air Purifier, Daikin has brought its formidable innovative tradition – honed in the residential and commercial climate control sector – to bear on this growing market segment.
The MC707 removes the most common allergens such as pollen, dust, mite droppings and mold and adjuvant substances such as formaldehyde.
The new technology means cleaner air and increased performance with the same whisper quiet operation in an aesthetically pleasing design.
For more information or other Daikin products, please go to the link and you will be connected to the official Daikin site.
|
|
F-PXC50X
Air Purifier ( F-PXC50X )
Super Nano-Tech deodorizing
Composite filter equipped
3D airflow
Air quality indicator
Compact design
Ultra quiet design
4-speed selection
F-P04DXZ
Air Purifier ( F-P04DXZ )
Nano-Tech deodorizing
Composite filter equipped
Air Intelligent Control
Pollutant sensor
3-speed selection
3-hour timer
|
|
JS' range of steam humidifiers includes electrode boiler, resistive, gas-fired, steam-to-steam, high temperature hot water-to-steam and live steam systems.
All available with expert advice as to product selection and back-up by one of Europe's largest humidification engineering divisions.
|
|
AT 3000
The AT 3000 series is Nordmann's top line. Four different sizes of casing are available, making a total of 10 basic types covering 4 - 130 kg/h of steam production to meet a variety of steam production.
Advantages of the AT 3000 series at a glance:
Program level
Service level
patented Self-cleaning with SC system
Anti-foam system
Stainless steel casing
RS 485 interface
integrated humidity controller
Remote indication relay for collective messages
Simple, rapid Installation
|
|
Both the RC 3000 ( for direct humidification in the room ) and the DC 3000 ( for duct humidification ) are attractive steam humidifiers for small rooms that need exactly the right climatic conditions
The humidifiers are microprocessor-controlled, fully automatic and have a stainless steel cabinet. There are nominal outputs of 2 and 3 kg/h steam available. The control mode can be either on/off or continuous.
Advantages of the RC 3000 series at a glance:
Built-in silent axial fan
Remote indication relay (collective message)
Housing of stainless steel
Options:
Proportional control adapter
|
|
This type of humidifier is fed by steam from a main supply rather than being generated locally by a self-generative unit.
An effective system which ensures :
- High steam output per metre of lance.
- Very low noise levels.
- Simplified duct and piping requirements.
- Close spacing where multiple lances are needed.
- Low steam ejection velocity for efficient air / steam mixing.
|
|
Kemp Dri-Breathers can be installed on a storage tank vent connection to prevent moisture from entering the tank. Kemp Dri-Breathers prevent moisture from contaminating stored hygroscopic liquids such as hydraulic fluid or gasoline. When fitting with a check valve manifold, Dri-Breathers can also prevent water from accumulating in a storage tanks and interacting with corrosive liquids like sulfuric acid. Moisture removal is a key component in reducing expensive tank corrosion that could lead to eventual tank failure.
Standard Dri-Breathers sizes are available ranging between 3.8GPM to 115GPM (1lb to 26lb water) holding capacity.
All Kemp Dri-Breathers are equipped with a moisture indicator. The color of the moisture indicator changes to show when the desiccant has become saturated with moisture. When this occurs, the desiccant can be replaced or easily reactivated using a Kemp Dri-Breather Reactivator.
|
|
The JetSpray humidifier combines compressed air and water to produce fine sprays of moisture that immediately evaporate to raise the humidity to the desired level.
It can be fitted inside an AHU or duct, or directly in the space to be humidified.
The system requires very little energy to operate, has the lowest compressed air consumption of any similar system in the world and due to its self-cleaning nozzles requires very little maintenance.
|
|
The design-oriented TurboFog 4 system is designed to provide air humidification in low-noise production and storage facilities as well as in administrative centres and offices. The innovative high-pressure nozzles atomises the water into an ultrafine aerosol mist. A mini-fan distributes the aerosols (floating droplets of vapour) rapidly in the room air. With an operating noise level of 53 db(A), the fan is barely audible. The unit operates absolutely drip-free, and with no disturbing ''cold spot''. This means it can also be used in rooms with very low ceilings.
Principle of function:
High-pressure nozzle system using a DRAABE-developed high-pressure pulsation technique by which the water is atomised by way of a pulsating high pressure (85 bar) and special titanium nozzles to form a micro-fine aerosol (single-component technique).
Application:
Offices, exhibitions, lobbies, low-ceilinged production/storage facilities
|
|
HasconFog is an innovative system for the environment relative humidity control, composed by 3 main elements :
Nebulizer nozzles, electronic gearcase for reading and control and a connection kit to water and pneumatic net.
APPLICATIONS
- Cellars for wine refinement in casks
- Food storage
- Freeze rooms
- Textile industry
- Air treatment plants
- Electronic plants
- Dust removalSmell removal
- Enzyme treatments
|
|
| ... products without technical information |
| |
|
|
Air treatment: Purifiers, Humidifiers, Dehumidifiers
